The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add a OMAP4 specific GMPC nand config for pcm049 and phyCARD-A-XL2 to increase
performance. Also add the possiblility to pass a board GPMC nand config.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This function consists of only inline asm statements, so
use assembly in the first place. Also makes sure that the
function is compiled in arm mode.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

There is no need to call a_init before relocation, so rename
the function to omap3_core_init and call it from board code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This helper function can be used for automatic
SDDR configuration based on register settings
made by a previously first stage bootloader
i.e. x-loader.

Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Inspired from reset_cpu in omap4_generic.c.

Signed-off-by: Juergen Kilb <j.kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add some common xload helper functions to determine the boot source
on omap3/4 and to load images from mmc and nand.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

These functions can be used on omap4 aswell, so move them to
omap.c

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch adds support to detect the different
OMAP36XX silicon revisions.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch adds the support to detect OMAP3630.

It also re-organizes the CPU_xxxx definitions in sys_info.h
to ascending order so that newer silicons can be added at
bottom.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch ensures that all silicon revisions
are detected. (Current implementation cannot
detect ES1.0).

In the process, the 'seemingly' hardcoded macros
identifying cpu revision (e.g. CPU_ES1P1) have
been updated to include the CPU name as well.
(The mapping of IDCODE value to silicon revision
may not be same across different OMAP families).

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch sets the cpu type based on the hawkeye value
read from the IDCODE register. So far, cpu type was
hardcoded.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch adds macros to extract the hawkeye
and version number from IDCODE value.

Updated function get_cpu_rev() to use new macro.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include/common.h declares this as "unsigned long addr", so we unify it.
This also silences a doxygen warning.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

the place. This clean up all ARM architectures to use only one set
of io functions.

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>

[Patch 11/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP3 Silicon files

This patch introduces support for OMAP3430 - provides for generic OMAP3 files.

Signed-off-by: Nishanth Menon<x0nishan@ti.com>