LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers / mci / Kconfig

2019-12-02	ea092d6 Browse files » mci: MCI_IMX_ESDHC_PBL has no dependency on MCI ... While it is located in the MCI deirectory, it has no direct dependency on the MCI core, so it should not be under the MCI condition in Kconfig. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 29 Nov 2019 Sascha Hauer committed on 2 Dec 2019
2019-11-06	ce99d0c Browse files » mci: add support for stm32mp sd/mmc controller ... This driver was ported from u-boot v2019.10. Instead of devicetree compatible it is using ARM AMBA id. So, there is no need to patch devicetree with different compatible as it was implemented in u-boot. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 15 Oct 2019 Sascha Hauer committed on 6 Nov 2019
2019-05-06	d6d3d0a Browse files » mci: add driver for BCM283x sdhost core ... The sdhost is a simple MMC controller found on the Broadcom BCM283x line of SoCs. The driver code was ported from U-Boot and then simplified a bit, by dropping a lot of the state tracking. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 May 2019 Sascha Hauer committed on 6 May 2019
2019-03-07	369d39a Browse files » Merge branch 'for-next/spd' Sascha Hauer committed on 7 Mar 2019
2019-03-05	49ffafe Browse files » esdhc-xload: Move to drivers/mci ... The esdhc-xload code will be used by upcoming Layerscape support aswell, so move it from architecture code to drivers/mci/. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Mar 2019
2019-03-04	74de1af Browse files » crc: import crc_itu_t() from kernel ... Our cyc_crc16() function is the same function as crc_itu_t() in the Linux kernel. Import and use crc_itu_t() from the Kernel for consistency. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Mar 2019
2019-02-12	15b64fd Browse files » mci: imx-esdhc: Add layerscape support ... This adds support for the esdhc controller found on Layerscape SoCs. This means adding the compatible and a driver data to access the controller in bigendian mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Feb 2019
2017-04-19	bdcf89d Browse files » mci: add Marvell Dove SDHCI driver ... This adds a driver for the SDHCI controller found on Marvell Dove SoCs. Despite a missing pinctrl driver, corresponding MPP config has to be set on a per board basis. This driver was succesfully tested with Solidrun Dove Cubox. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 18 Apr 2017 Sascha Hauer committed on 19 Apr 2017
2016-01-04	295d676 Browse files » bcm2835: introduce mach-bcm283x ... This patch changes the most part of mach-bcm2835 to mach-bcm283x. This prepares to add RPi2 support which is a bcm2836. This patch changes the Kconfig entry namens to BCM283X for drivers only. These drivers should working the same in bcm2836. While updating defconfig I added LED support/trigger option. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Aring authored on 19 Dec 2015 Sascha Hauer committed on 4 Jan 2016
2015-06-26	5f751d1 Browse files » MCI: pxa: depend on right symbol ... Now that we also have PXA3XX support the dependency on ARCH_PXA is too broad for this driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 25 Jun 2015 Sascha Hauer committed on 26 Jun 2015
2015-03-09	4680b37 Browse files » Merge branch 'for-next/streaming-dma' ... Conflicts: drivers/mci/dw_mmc.c Sascha Hauer committed on 9 Mar 2015
2015-03-06	451967e Browse files » MCI: dw-mmc: convert to streaming DMA ops ... Move to the common streaming DMA ops in order to get rid of the direct usage of the ARM MMU functions for the cache maintenance. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 5 Mar 2015 Sascha Hauer committed on 6 Mar 2015
2015-03-05	84fcb04 Browse files » MMC: dw_mmc: Add support for PIO mode and Rockchip variant of this hardware ... Signed-off-by: Andrey Panov <rockford@yandex.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Panov authored on 4 Mar 2015 Sascha Hauer committed on 5 Mar 2015
2013-12-04	5f9dea9 Browse files » tegra: add SDMMC controller driver ... Confirmed working on Tegra 2, may need some small adjustments for Tegra 3. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
2013-12-02	35d64bb Browse files » mmci: add missing depends on ARM_AMBA ... The mmci implementation uses some specific arm amba functions, so add a depends on ARM_AMBA. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Aring authored on 27 Nov 2013 Sascha Hauer committed on 2 Dec 2013
2013-10-22	4d2d66f Browse files » add: mmci drivers ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 22 Oct 2013 Sascha Hauer committed on 22 Oct 2013
2013-09-11	c6c3afb Browse files » mci: add designware mmc controller support ... Based on the U-Boot driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Sep 2013
2013-05-30	4a4f2f2 Browse files » mci: Add support for MMC boot partitions ... Some MMC cards support boot partitions. These are special regions on the MMC card intended to put a bootloader on. This patch adds support for these partitions, they are accessible as /dev/diskx.boot[0\|1]. Additionally the partitions can be configured bootable using a device parameter. This can be used to mark the user area or one of the boot partitions as bootable. Since this feature is mostly seen on eMMC cards it is made optional to lower the size impact for boards which do not have eMMC. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
2013-05-30	2821446 Browse files » Added sd driver for bcm2835 (Raspberry PI) ... Replaced defines according to sdhci.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> wilhelm authored on 10 May 2013 Sascha Hauer committed on 30 May 2013
2012-12-20	4746717 Browse files » ARM OMAP AM33XX: create new ARCH for AM33xx ... Created ARCH for AM33xx boards as second stage bootloader. This includes: - Added dmtimer0 - Created basic header files - Added MMC support for ARCH_AM33XX - Added reset function Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Some header file cleanup by: Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 18 Dec 2012 Sascha Hauer committed on 20 Dec 2012
2012-12-08	4c20f9a Browse files » Cleanup Kconfig files ... This patch provides a global cleanup barebox Kconfig files. This includes replacing spaces to tabs, formatting in accordance format, removing extraneous lines and spaces. No functional changes. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 8 Dec 2012 Sascha Hauer committed on 8 Dec 2012
2012-11-14	d4695de Browse files » mci_spi: always compute command crc byte ... The spec says: "the CMD8 CRC verification is always enabled. The Host shall set correct CRC in the argument ofCMD8. If CRC error is detected, card returns CRC error in R1 response regardless of command index." Make it simple, and compute crc on every commands. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 12 Nov 2012 Sascha Hauer committed on 14 Nov 2012
2012-04-24	2e7db33 Browse files » ARM: add initial i.MX6 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Apr 2012
2012-02-09	ffb781e Browse files » Correct Kconfig comment for MCI_OMAP_HSMMC to include OMAP3. ... Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert P. J. Day authored on 7 Feb 2012 Sascha Hauer committed on 9 Feb 2012
2011-12-08	eae6d3b Browse files » drivers/mci: add PXA host controller ... Add a simple PIO based host controller for MMC and SD cards on PXA SoCs. Reads and writes are available, and no usage is made of DMA or IRQs. SPI mode is not supported yet. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 7 Dec 2011 Sascha Hauer committed on 8 Dec 2011
2011-12-07	8b3d102 Browse files » mci Kconfig: select DISK_WRITE instead of ATA_WRITE ... ATA_WRITE does not exist anymore. DISK_WRITE is the successor for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 7 Dec 2011
2011-11-28	81dbc74 Browse files » mmc spi: add missing dependency on SPI ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Nov 2011
	82db23d Browse files » Use generic block layer to access the drives and do partition parsing ... Change all relevant blockdevice users to the simplified interface. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 24 Nov 2011 Sascha Hauer committed on 28 Nov 2011
	bda8348 Browse files » ATA/DISK: Reorganize file structure and names for future updates ... 'ATA' means more an interface than a disk drive. Change the names to reflect their real meaning. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 24 Nov 2011 Sascha Hauer committed on 28 Nov 2011
2011-11-25	2aad209 Browse files » mci: Add MCI over SPI support ... This patch adds MMC over SPI support to mci-core.c and mci_spi.c driver. This driver is useful when SOC doesn't have built-in MCI component. Tested with nios, 2Go SD-CARD and FAT file system. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 24 Nov 2011 Sascha Hauer committed on 25 Nov 2011