bootm: Move bootm options to common/Kconfig ...

bootm has a C API, so the bootm options have to depend on the
option providing the bootm code (CONFIG_BOOTM), not on the
option providing the command (CONFIG_CMD_BOOTM). Fixing the
dependencies makes it possible to fully use bootm from C without
enabling the bootm command support.
This also removes the CMD_ prefix from the options which means
we have to update the defconfigs aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: NET_DHCP -> CMD_DHCP ...

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Network commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: NET_PING -> CMD_PING ...

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Network commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9263ek: add lcd support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defconfig: Switch all defconfig to new tftp command ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Atmel sam9x boards: enable the pbl ...

so we are smaller than the 256KiB reserved for barebox

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9260ek/9260ek/9g20ek: drop bootz and fat write support to fit in flash ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9263ek: update defconfig ...

drop:
 - bootz
 - cfi 32 width
 - cpuinfo command support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9263ek: update defconfig ...

- set max size to 256KiB
 - enable MMU
 - bootm: enable oftree and initrd support
 - nand: drop non used hw ecc

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91sam9263ek: add dfu and usb serial support ...

if left_click is pressed 5s during boot enable dfu otherwise usbserial

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91sam9263ek: add leds support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91sam9263ek: add mci1 support ...

enable fat support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91sam9263ek: update defconfig ...

enable nand and ubi support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam263ek: switch to default env ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

configs: use new savedefconfig format as in linux ...

this will reduce and simplify defconfigs maintainance
it will also save some disk space

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

net: rework the mii support ...

this rework is done in order to add a phylib and allow to have phy driver support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

move boards to arch/<architecure>/boards ...

this will allow each arch to handle the boards more simply and depending on
there need

the env var BOARD will refer to the current board dirent

for sandbox as we have only one board the board dirent is arch/sandbox/board

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9263ek: update defconfig ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rename U-Boot-v2 project to barebox ...

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: introduce CPU CONFIG from linux ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: Atmel Ref board fix config MACH to match with mach-types ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91: add support for the at91sam9263ek board of Atmel ...

Here is the page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice VILCHEZ <patrice.vilchez@atmel.com>
Cc: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>