PTR_ERR_OR_ZERO is designed to replace boiler plate like:

	if (IS_ERR(x))
		return PTR_ERR(x);
	return 0;

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adapts all files that were identifed by licensecheck
(https://salsa.debian.org/build-common-team/licensecheck.git) as
licensed under the GPL.

The advantage is that these specifiers are machine-parseable which helps
license conformance, e.g. for packaging barebox in Debian.

While touching these files also do some minor comment reformatting to
get some uniform layout.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Pass MACH_TYPE_TX28 to barebox_arm_entry() and check for it in initcalls
to make the board multi image safe.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Instead of putting hardware specific bit masks in platform_data just
use the decimal interface width and encode this in the driver. This
makes it easier to create the platform_data and helps device tree
based implementations.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The ocotp device is completely SoC internal, no need to register
it from boards. Register it from SoC code instead.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This file originates in Linux.  Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.

This commit was generated by the following commands:

  find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
  git mv include/sizes.h include/linux/

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devfs_add_partition was changed to return the cdev. Fix the result
checking accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	arch/mips/boards/qemu-malta/init.c
	commands/bootm.c
	drivers/of/base.c

mach/gpio.h is for the gpio API, so move unrelated stuff
away.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.

Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Some boards have board specific special clock setups. These are now
done in the SoC specific clock drivers.

It is assumed that most board specific clock setup is done based on
copy/paste from U-Boot. The generalized clock setup differs from
some boards:

- ioclk are adjusted to 480MHz
- ssp clocks are adjusted to 96MHz
- enet out clock is enabled

Some boards adjusted the ioclk to 320MHz and the ssp clock to 160MHz.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use MMC_CAP_ names instead of MMC_MODE_. This makes it more
clear that these are capabilities of host/card and do not refer
to the current mode. These are in line with the Linux Kernel
except for MMC_CAP_MMC_HIGHSPEED_52MHZ which could be fixed
later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds the device id mechanism to the i.MX fec driver and
uses it to determine the fec version. Also adds devicetree
probing support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

For some reason, the mxs-boards missed some length parameters when adding
devices. This made reading from ocotp crash in the current version.
Provide missing lengths, use a consistent format and fix the length for
the LCDIF.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Bitrotted over time and nearly unused, so remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Higher frequencies do not seem to work.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To prevent turning on the display before the signals are stable.
Also, put the LCD_CS pin in the same mode as the kernel does to
prevent flickering.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>