Similar to the device parameter functions also make the globalvar
functions more consistent. This also adds support for readonly
globalvars and changes several existing globalvars which should
really be readonly to readonly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for the phycore i.MX6 UltraLite.
 - 512MB RAM
 - 512MB NAND
 - 10/100 Mbit Ethernet

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Some phyCORE-i.MX6 variants have eMMC instead of a NAND chip. Provide an
update_handler for them.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The extra environment folder for the phyCORE-i.MX6 had the suffix
'-mira'. That's the name of a baseboard. Since the bootloader is generic
for all baseboards, use a generic suffix for the environment folder.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add Phytec phyCORE-i.MX6 SOM.
  Support:
   - imx6dl-phytec-phycore-som-emmc:
      - 1GB RAM on 1 Bank with 64Bit
      - 10/100MBit Ethernet
      - SPI NOR
      - eMMC
      - SD
      - UART

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Our asprintf and vasprintf have different prototypes than the glibc
functions. This causes trouble when we want to share barebox code
with userspace code. Change the prototypes for (v)asprintf to match
the glibc prototypes. Since the current (v)asprintf are convenient
to use change the existing functions to b(v)asprintf.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Since commit 764ae1647cafa ("ARM: i.MX: Add correct SoC type detection
for i.MX6") the definition of the function cpu_is_mx6q and cpu_is_mx6dl
has changed.  Before that change they match the SoM family Quad/Dual and
DualLite/Solo. After that change they are SoM specific. They match only
Quad and DualLite. There are extra functions cpu_is_mx6d and cpu_is_mx6s
for SoM Dual and Solo.

We have not seen any real world consequences of this problem yet.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add Phytec phyCORE-i.MX6 SOM.
     - imx6dl-phytec-phycore-som-nand
        - 256GB RAM on 1 Bank with 32Bit
        - 10/100MBit Ethernet
        - NAND
        - SD
        - UART

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add Phytec phyCORE-i.MX6 SOM.
    Support:
     - imx6q-phytec-phycore-som-nand:
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - NAND
        - SD
        - UART

     - imx6q-phytec-phycore-som-emmc
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - eMMC
        - SD
        - UART

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The main idea behind this patch is to avoid redundant code.  Because of
the module similarities of all i.MX6 based phytec boards, we can merge
its code.

The phytec-som-imx6 merges the code of all i.MX6 based phytec SOMs.  So
we will have only one "board" in the barebox for phyCARD-i.MX6 and
phyFLEX-i.MX6.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>