Required for emmc pin function switching on Raspberry Pi 3.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Since the 16550 driver now supports the RPI3 miniuart, enable it in the default
 config.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Autosize the malloc area according to the available RAM size.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds basic support at the same feature level as the other
supported raspberry pi boards.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This commit switches the RaspberryPi arch over to probe Barebox
from the builtin DT and enables multi-image builds.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The defconfig files are long untouched and a
make xy_defconfig; make savedefconfig usually generates quite
a different looking file. Refresh them to make it easier to generate
patches against the configs using
make xy_defconfig; make menuconfig; make savedefconfig

This has been done with the following script.

for a in arch/*; do
	arch=$(basename $a)
	for c in $a/configs/*; do
		config=$(basename $c)

	export ARCH=$arch
	make $config && make savedefconfig && mv defconfig $c
	done
done

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm has a C API, so the bootm options have to depend on the
option providing the bootm code (CONFIG_BOOTM), not on the
option providing the command (CONFIG_CMD_BOOTM). Fixing the
dependencies makes it possible to fully use bootm from C without
enabling the bootm command support.
This also removes the CMD_ prefix from the options which means
we have to update the defconfigs aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch changes the most part of mach-bcm2835 to mach-bcm283x. This
prepares to add RPi2 support which is a bcm2836. This patch changes the
Kconfig entry namens to BCM283X for drivers only. These drivers should
working the same in bcm2836.

While updating defconfig I added LED support/trigger option.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This will allow to have hw driver or asm optimised driver.

Use a priority level to determine which one to use at runtime.
The generic one will be 0.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Enable MMU, stack dumps and a lot of other features

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Tested-By: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>