Merge branch 'for-next/rpi'

ARM: phyCORE-i.MX8M SOM support ...

The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.

phyCORE-i.MX8M:
 - 1GB LPDDR4 RAM
 - eMMC
 - microSD
 - Ethernet

Signed-off-by: Christian Hemp <christian.hemp@posteo.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: Add device tree for Compute Module 3. ...

Compute Module needs "no-sd" property on the MMC interface otherwise
mci-bcm2835 hangs on SD card probe.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add support for ZII i.MX8MQ based devices ...

Add support for the following ZII i.MX8MQ based boards:

   - ZII i.MX8MQ RMB3
   - ZII i.MX8MQ Zest

Most of the basic peripherals are supported by this patch. More
advanced features such as PCIe, display support, etc, are planned to
be added later.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx: add support for Udoo Neo full ...

Original patch from Uwe Kleine-König, I fixed the
review comments and the imxcfg file to use the udoo neo values.

I also tested the support on the udoo neo full board.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ultrascale'

Merge branch 'for-next/imx'

ARM: omap: Add board support for WAGO pfc200 platform ...

This adds support for the AM3517 based WAGO pfc200 SPS.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: CCMX51: Switch to multiimage support ...

This is a cumulative patch for the Digi ConnectCore CCMX51 SOM.
It includes:
- Switch board to devicetree probe.
- Add MMC update handler.
- Switch to multiimage support.
- Cleanup and optimize board code.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: zynqmp: add support for Xilinx ZCU104 board ...

Add support for the Xilinx Zynq Ultrascale+ MPSoC architecture (ZynqMP)
and the Xilinx ZCU104 board.

Barebox is booted as BL33 in EL-1 and expects that a BL2 (i.e. the FSBL)
already took care of initializing the RAM. Also for debug_ll, the UART
is expected to be already setup correctly. Thus, you have to add the
Barebox binary to a boot image as described in "Chapter 11: Boot and
Configuration" of "Zynq Ultrascale+ Device Technical Reference Manual".

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: phytec-som-imx6: Add full featured phyCORE-i.MX 6ULL ...

The phyCORE-i.MX 6ULL now comes in a full featured (Y2 variant) and a
low cost (Y0 variant) version. The main difference for the barebox is
the missing second USB OTG port on the Y0 variant and the RAM configuration.

So to account for these differences the existing low cost version is
renamed and the full featured version added.

The results are following phyCORE-i.MX 6ULL modules:

phyCORE-i.MX 6ULL low cost:
	- i.MX 6ULL Y0
	- 256 MB RAM
	- NAND
	- Ethernet 10/100 MBits
	- USB OTG

phyCORE-i.MX 6ULL full featured:
	- i.MX 6ULL Y2
	- 512 MB RAM
	- NAND
	- Ethernet 10/100 MBits
	- USB OTG
	- USB Host

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/rpi3'

Merge branch 'for-next/imx'

ARM: i.MX: Add liteboard support ...

liteboard is a development board which uses liteSOM as its
base. liteSOM can't exist on its own, but is used as part
of other boards - it only contains processor and memory.

Hardware specification:
 * liteSOM:
   - i.MX6UL
   - 256M or 512M DDR3 RAM
   - eMMC (uSDHC2)
 * Ethernet PHY
 * USB host (usb_otg1)
 * MicroSD slot (uSDHC1)

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: add raspberry pi 3 support ...

This adds basic support at the same feature level as the other
supported raspberry pi boards.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: Add initial support for the EVB-KSZ9477 eval board ...

The EVB-KSZ9477 is an evaluation board for the KSZ9477 ethernet switch.
This board is equipped with a atsama5d3 SoC with 256MiB of SDRAM, 256MiB
of NAND flash and a SD card slot.

For now only second stage booting is supported with AT91bootstrap as
first stage loader.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: Add support for ZII's i.MX7D-based RPU2 board ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add ZII SCU3 ESB board ...

Add ZII SCU3 ESB board, which is i.MX51 based and similar enought to
RDU1 that it can be handled by the same image (different DT).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add ZII SCU2 Mezz Board ...

Add ZII SCU2 Mezz Board. Which is a i.MX51 based board that is similar
enough to RDU1 that they both can be handled by a single
image (type can be detected at runtime).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: zii-vf610-dev: Convert SPU3 to use upstream DTS ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: zii-vf610-dev: Convert CFU1 to use upstream DTS ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx8mq'

ARM: i.MX: Add support for ZII RDU1 board ...

ZII RDU1 is a i.MX51 based, Babbagde board derivative supported by
upstream kernel. This commit add support for it to Barebox.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX8: Add i.MX8mq EVK support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: phytec-som-imx6: add phyCORE-i.MX6 QuadPlus with 1GiB RAM ...

Add Phytec phyCORE-i.MX6 QuadPlus:
 - imx6qp-phytec-phycore-som-nand:
   - 1GiB RAM on 2 Banks with 64Bit
   - 1000Mbit Ethernet
   - NAND
   - SD
   - UART

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>

ARM: Add Advantech imx6 board support ...

Add support for Advantech i.MX6 SOM named ROM-7421.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX53/TX53: rework to dts based boot ...

Since nobody likes to use platformcode based machines any more, we also
switch this one to use dts based booting.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boards: samx6: add initial support for kontron samx6i ...

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9263ek: enable DT support ...

Add at91sam9263ek.dts to build.
Include mmc1 in at91sam9263ek.dts, as mmc1 is what the evaluation
kit uses for the SD card.

Add DT specific of_init
Adjust build to drop non-DT files from mach-at91

RomBOOT
>AT91Bootstrap 3.0.1
patch-0.8 64MB Ram
Load from SD-Card
Loading from SD-Card
Open: u-boot.bin
Loading from SD-Card - Success

barebox 2017.12.0-00036-gda46de29e #23 Sun Dec 31 09:15:39 CET 2017

Board: Atmel at91sam9263ek
gpio-at91 fffff200.gpio: AT91 gpio driver registered
gpio-at91 fffff400.gpio: AT91 gpio driver registered
gpio-at91 fffff600.gpio: AT91 gpio driver registered
gpio-at91 fffff800.gpio: AT91 gpio driver registered
gpio-at91 fffffa00.gpio: AT91 gpio driver registered
pinctrl-at91 pinctrl.2: AT91 pinctrl registered
AT91: Detected soc type: at91sam9263
AT91: Detected soc subtype: Unknown
mdio_bus: miibus0: probed
macb fffbc000.ethernet: Cadence MACB at 0xfffbc000
at91_udc fff78000.gadget: at91_udc version 3 May 2006
atmel_mci fff80000.mmc: version: 0x210
atmel_mci fff80000.mmc: registered as fff80000.mmc
atmel_mci fff84000.mmc: version: 0x210
atmel_mci fff84000.mmc: registered as fff84000.mmc
malloc space: 0x239fab00 -> 0x23dfaaff (size 4 MiB)
barebox-environment environment.6: probe failed: No such device
environment load /dev/env0: No such file or directory
Maybe you have to create the partition.
running /env/bin/init...
\e[?25h
Hit any key to stop autoboot:    3
barebox@Atmel at91sam9263ek:/ iomem
0x00000000 - 0xffffffff (size 0x00000000) iomem
  0x00300000 - 0x00313fff (size 0x00014000) 300000.sram
  0x00500000 - 0x00503fff (size 0x00004000) 500000.sram
  0x00700000 - 0x00700fff (size 0x00001000) 700000.fb
  0x20000000 - 0x23ffffff (size 0x04000000) ram0
    0x239fab00 - 0x23dfaaff (size 0x00400000) malloc space
    0x23dfab00 - 0x23dfffe2 (size 0x000054e3) board data
    0x23e00000 - 0x23e53cc8 (size 0x00053cc9) barebox
    0x23e53cc9 - 0x23e6404f (size 0x00010387) barebox data
    0x23e64050 - 0x23e6754b (size 0x000034fc) bss
    0x23fe4000 - 0x23fe7fff (size 0x00004000) ttb
    0x23fe8000 - 0x23feffff (size 0x00008000) stack
  0xfff78000 - 0xfff7bfff (size 0x00004000) fff78000.gadget
  0xfff80000 - 0xfff805ff (size 0x00000600) fff80000.mmc
  0xfff84000 - 0xfff845ff (size 0x00000600) fff84000.mmc
  0xfff8c000 - 0xfff8c1ff (size 0x00000200) fff8c000.serial
  0xfffbc000 - 0xfffbc0ff (size 0x00000100) fffbc000.ethernet
  0xffffee00 - 0xffffefff (size 0x00000200) ffffee00.serial
  0xfffff200 - 0xfffff3ff (size 0x00000200) fffff200.gpio
  0xfffff400 - 0xfffff5ff (size 0x00000200) fffff400.gpio
  0xfffff600 - 0xfffff7ff (size 0x00000200) fffff600.gpio
  0xfffff800 - 0xfffff9ff (size 0x00000200) fffff800.gpio
  0xfffffa00 - 0xfffffbff (size 0x00000200) fffffa00.gpio
  0xfffffd30 - 0xfffffd3e (size 0x0000000f) fffffd30.timer
barebox@Atmel at91sam9263ek:/ devinfo
`-- global
`-- nv
`-- platform
   `-- mem0
      `-- 0x00000000-0x03ffffff (    64 MiB): /dev/ram0
   `-- 300000.sram
      `-- 0x00000000-0x00013fff (    80 KiB): /dev/sram0
   `-- 500000.sram
      `-- 0x00000000-0x00003fff (    16 KiB): /dev/sram1
   `-- ahb.0
      `-- apb.1
         `-- fffff000.interrupt-controller
         `-- fffffc00.pmc
         `-- ffffe200.ramc
         `-- ffffe400.smc
         `-- ffffe800.ramc
         `-- ffffea00.smc
         `-- ffffec00.matrix
         `-- fffffd30.timer
         `-- fff7c000.timer
         `-- fffffd00.rstc
         `-- fffffd10.shdwc
         `-- pinctrl.2
            `-- fffff200.gpio
            `-- fffff400.gpio
            `-- fffff600.gpio
            `-- fffff800.gpio
            `-- fffffa00.gpio
         `-- ffffee00.serial
            `-- cs0
               `-- 0x00000000-0xffffffffffffffff (   0 Bytes): /dev/cs0
         `-- fff8c000.serial
            `-- cs1
               `-- 0x00000000-0xffffffffffffffff (   0 Bytes): /dev/cs1
         `-- fffbc000.ethernet
            `-- miibus0
            `-- eth0
         `-- fff78000.gadget
            `-- usbgadget
         `-- fff80000.mmc
            `-- mci0
         `-- fff84000.mmc
            `-- mci1
         `-- fffffd40.watchdog
         `-- fffa4000.spi
         `-- fffac000.can
      `-- 700000.fb
      `-- a00000.ohci
      `-- 10000000.ebi
   `-- i2c-gpio-0.3
   `-- leds.4
   `-- gpio_keys.5
   `-- cs2
      `-- 0x00000000-0xffffffffffffffff (   0 Bytes): /dev/cs2
   `-- soc
   `-- mem1
      `-- 0x00000000-0xfffffffe (     4 GiB): /dev/mem
   `-- environment.6
`-- mdio_bus
`-- fs
   `-- ramfs0
   `-- devfs0
`-- net
`-- udc0
`-- fb0
   `-- 0x00000000-0x000257ff (   150 KiB): /dev/fb0
barebox@Atmel at91sam9263ek:/ drvinfo
Driver  Device(s)
--------------------
syscon
at91-pit
        fffffd30.timer
gpio-at91
        fffff200.gpio
        fffff400.gpio
        fffff600.gpio
        fffff800.gpio
        fffffa00.gpio
pinctrl-at91
        pinctrl.2
atmel_usart
        ffffee00.serial
        fff8c000.serial
ramfs
        ramfs0
devfs
        devfs0
fat
tftp
at91sam9-smc
Generic PHY
macb
        fffbc000.ethernet
atmel_nand
cfi_flash
at91_udc
        fff78000.gadget
atmel_mci
        fff80000.mmc
        fff84000.mmc
atmel_lcdfb
        700000.fb
gpio-leds
        leds.4
gpio_keys
        gpio_keys.5
mmio-sram
        300000.sram
        500000.sram
mem
        mem0
        mem1
barebox-environment

Use 'devinfo DEVICE' for more information
barebox@Atmel at91sam9263ek:/ gpioinfo

GPIOs 0-31, chip fffff200.gpio:
             dir val requested  label
  GPIO    0: unk  hi        false
  GPIO    1: unk  hi        false
  GPIO    2:  in  hi        false
  GPIO    3: unk  hi        false
  GPIO    4: unk  hi        false
  GPIO    5: unk  hi        false
  GPIO    6: unk  lo        false
  GPIO    7: unk  hi        false
  GPIO    8: unk  hi        false
  GPIO    9: unk  hi        false
  GPIO   10: unk  hi        false
  GPIO   11: unk  hi        false
  GPIO   12: unk  hi        false
  GPIO   13:  in  hi        false
  GPIO   14:  in  hi        false
  GPIO   15:  in  hi        false
  GPIO   16:  in  hi        false
  GPIO   17:  in  hi        false
  GPIO   18:  in  hi        false
  GPIO   19:  in  lo        false
  GPIO   20:  in  hi        false
  GPIO   21:  in  hi        false
  GPIO   22:  in  hi        false
  GPIO   23:  in  hi        false
  GPIO   24:  in  hi        false
  GPIO   25:  in  lo         true  udc_vbus
  GPIO   26: unk  hi        false
  GPIO   27: unk  hi        false
  GPIO   28: unk  hi        false
  GPIO   29: unk  hi        false
  GPIO   30:  in  lo        false
  GPIO   31:  in  hi        false

GPIOs 32-63, chip fffff400.gpio:
             dir val requested  label
  GPIO   32:  in  hi        false
  GPIO   33:  in  hi        false
  GPIO   34:  in  hi        false
  GPIO   35:  in  hi        false
  GPIO   36:  in  hi        false
  GPIO   37:  in  hi        false
  GPIO   38:  in  hi        false
  GPIO   39: out  hi         true  d3
  GPIO   40:  in  hi        false
  GPIO   41: unk  hi        false
  GPIO   42:  in  hi        false
  GPIO   43:  in  hi        false
  GPIO   44:  in  hi        false
  GPIO   45:  in  hi        false
  GPIO   46:  in  hi        false
  GPIO   47:  in  hi        false
  GPIO   48:  in  hi        false
  GPIO   49:  in  hi        false
  GPIO   50:  in  hi        false
  GPIO   51:  in  hi        false
  GPIO   52:  in  hi        false
  GPIO   53:  in  hi        false
  GPIO   54:  in  hi        false
  GPIO   55:  in  hi        false
  GPIO   56:  in  hi        false
  GPIO   57:  in  hi        false
  GPIO   58:  in  hi        false
  GPIO   59: out  lo   active low  PHY 50 MHz oscillator
  GPIO   60:  in  hi        false
  GPIO   61:  in  hi        false
  GPIO   62:  in  hi        false
  GPIO   63:  in  hi        false

GPIOs 64-95, chip fffff600.gpio:
             dir val requested  label
  GPIO   64:  in  hi        false
  GPIO   65: unk  hi        false
  GPIO   66: unk  hi        false
  GPIO   67: unk  hi        false
  GPIO   68:  in  hi         true  gpio_keys
  GPIO   69:  in  hi         true  gpio_keys
  GPIO   70: unk  lo        false
  GPIO   71: unk  lo        false
  GPIO   72: unk  lo        false
  GPIO   73: unk  lo        false
  GPIO   74: unk  lo        false
  GPIO   75: unk  lo        false
  GPIO   76: unk  lo        false
  GPIO   77:  in  hi        false
  GPIO   78: unk  lo        false
  GPIO   79: unk  lo        false
  GPIO   80: unk  lo        false
  GPIO   81: unk  lo        false
  GPIO   82: unk  lo        false
  GPIO   83: unk  lo        false
  GPIO   84:  in  hi        false
  GPIO   85:  in  hi        false
  GPIO   86: unk  lo        false
  GPIO   87: unk  lo        false
  GPIO   88: unk  lo        false
  GPIO   89: unk  lo        false
  GPIO   90: unk  lo        false
  GPIO   91: unk  lo        false
  GPIO   92:  in  hi        false
  GPIO   93:  in  hi         true  d2
  GPIO   94: unk  hi        false
  GPIO   95: unk  hi        false

GPIOs 96-127, chip fffff800.gpio:
             dir val requested  label
  GPIO   96:  in  hi        false
  GPIO   97:  in  hi        false
  GPIO   98:  in  hi        false
  GPIO   99:  in  hi        false
  GPIO  100:  in  hi        false
  GPIO  101:  in  hi        false
  GPIO  102:  in  hi        false
  GPIO  103:  in  hi        false
  GPIO  104:  in  hi        false
  GPIO  105:  in  hi        false
  GPIO  106:  in  hi        false
  GPIO  107:  in  hi        false
  GPIO  108: unk  lo        false
  GPIO  109: unk  lo        false
  GPIO  110: unk  lo        false
  GPIO  111:  in  hi        false
  GPIO  112: unk  lo        false
  GPIO  113: unk  hi        false
  GPIO  114: unk  hi        false
  GPIO  115: unk  lo        false
  GPIO  116: unk  hi        false
  GPIO  117: unk  hi        false
  GPIO  118: unk  hi        false
  GPIO  119: unk  hi        false
  GPIO  120: unk  lo        false
  GPIO  121: unk  hi        false
  GPIO  122: unk  hi        false
  GPIO  123: unk  lo        false
  GPIO  124: unk  hi        false
  GPIO  125: unk  hi        false
  GPIO  126: unk  hi        false
  GPIO  127: unk  hi        false

GPIOs 128-159, chip fffffa00.gpio:
             dir val requested  label
  GPIO  128:  in  hi        false
  GPIO  129:  in  hi        false
  GPIO  130:  in  hi        false
  GPIO  131:  in  hi        false
  GPIO  132:  in  hi        false
  GPIO  133:  in  hi        false
  GPIO  134:  in  hi        false
  GPIO  135:  in  hi        false
  GPIO  136:  in  hi        false
  GPIO  137:  in  hi        false
  GPIO  138:  in  hi        false
  GPIO  139:  in  hi        false
  GPIO  140:  in  hi        false
  GPIO  141:  in  hi        false
  GPIO  142:  in  hi        false
  GPIO  143:  in  hi        false
  GPIO  144:  in  hi        false
  GPIO  145:  in  hi        false
  GPIO  146:  in  lo         true  mci_cd
  GPIO  147:  in  hi        false
  GPIO  148:  in  hi        false
  GPIO  149: unk  lo        false
  GPIO  150:  in  hi        false
  GPIO  151: unk  lo        false
  GPIO  152: unk  lo        false
  GPIO  153: unk  lo        false
  GPIO  154: unk  lo        false
  GPIO  155: unk  lo        false
  GPIO  156: unk  lo        false
  GPIO  157: unk  lo        false
  GPIO  158: unk  hi        false
  GPIO  159:  in  hi        false
barebox@Atmel at91sam9263ek:/ clk_dump
slow_xtal (rate 32768, enabled)
    prog0 (rate 32768, enabled)
        pck0 (rate 32768, disabled)
    prog1 (rate 32768, enabled)
        pck1 (rate 32768, disabled)
    prog2 (rate 32768, enabled)
        pck2 (rate 32768, disabled)
    prog3 (rate 32768, enabled)
        pck3 (rate 32768, disabled)
main_xtal (rate 16367660, enabled)
    main_osc (rate 16367660, enabled)
        mainck (rate 16367660, enabled)
            pllbck (rate 98205960, enabled)
                usbck (rate 49102980, enabled)
                    uhpck (rate 49102980, disabled)
                    udpck (rate 49102980, disabled)
            pllack (rate 204595750, enabled)
                masterck (rate 102297875, enabled)
                    pioA_clk (rate 102297875, enabled)
                    pioB_clk (rate 102297875, enabled)
                    pioCDE_clk (rate 102297875, enabled)
                    usart0_clk (rate 102297875, enabled)
                    usart1_clk (rate 102297875, disabled)
                    usart2_clk (rate 102297875, disabled)
                    mci0_clk (rate 102297875, disabled)
                    mci1_clk (rate 102297875, disabled)
                    can_clk (rate 102297875, disabled)
                    twi0_clk (rate 102297875, disabled)
                    spi0_clk (rate 102297875, disabled)
                    spi1_clk (rate 102297875, disabled)
                    ssc0_clk (rate 102297875, disabled)
                    ssc1_clk (rate 102297875, disabled)
                    ac97_clk (rate 102297875, disabled)
                    tcb_clk (rate 102297875, disabled)
                    pwm_clk (rate 102297875, disabled)
                    macb0_clk (rate 102297875, enabled)
                    g2de_clk (rate 102297875, disabled)
                    udc_clk (rate 102297875, disabled)
                    isi_clk (rate 102297875, disabled)
                    lcd_clk (rate 102297875, enabled)
                    dma_clk (rate 102297875, disabled)
                    ohci_clk (rate 102297875, disabled)
barebox@Atmel at91sam9263ek:/ led
registered LEDs:
0 : name: d3         max_value: 1
1 : name: d2         max_value: 1
barebox@Atmel at91sam9263ek:/ led 1 1
barebox@Atmel at91sam9263ek:/ led 0 1

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx'