LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / dts / Makefile

2014-11-27	9196cac Browse files » ARM: i.MX: Add i.MX6sx sabresdb support ... This adds support for the Freescale i.MX6sx sabresdb board. Tested are: - UART - The three SD card slots - USB host - USB otg (host and device mode) - FEC (both) Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
2014-11-20	e8f9f5b Browse files » imx6: Add support for phyBOARD-SUBRA ... Add support for phyBOARD-SUBRA which use a phyFLEX-i.MX6 (pfla02) module. - i.MX6 SOLO with 512MB RAM Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 11 Nov 2014 Sascha Hauer committed on 20 Nov 2014
2014-11-20	50bd3ea Browse files » imx6: add support for phyBOARD-ALCOR ... Add support for phyBOARD-ALCOR which use a phyFLEX-i.MX6 (pfla02) module. - i.MX6 Quad with 1GB RAM on two banks Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 11 Nov 2014 Sascha Hauer committed on 20 Nov 2014
2014-11-03	73e6a47 Browse files » ARM: am335x: phyCORE-AM335x: Create new dts for MLO ... Use a mlo device tree with all bootable devices disabled. The bootsource is checked in the board file and only the needed device is enabled and registered. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 3 Nov 2014 Sascha Hauer committed on 3 Nov 2014
2014-10-14	926d391 Browse files » phyCORE-AM335x: Add barebox image without SPI NOR ... Boards like phyBOARD-WEGA RDK have an phyCORE-AM335x connected with no SPI NOR flash. Added dts to support this. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 10 Oct 2014 Sascha Hauer committed on 14 Oct 2014
2014-10-14	9da0a14 Browse files » ARM: dts: split phyCORE-AM335x device tree ... To support different module variants, split the phyCORE dts in dts and dtsi. Configurable parts which are supported by barebox are spi nor flash and i2c eeprom. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 10 Oct 2014 Sascha Hauer committed on 14 Oct 2014
2014-10-08	a6b6961 Browse files » boards: Add phytec-phyflex-am335x ... Add support for PHYTEC's phyFLEX-AM335x. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> [clean ups] Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Müller-Klieser authored on 7 Oct 2014 Sascha Hauer committed on 8 Oct 2014
2014-10-02	2a2a8b9 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 2 Oct 2014
2014-09-26	0a2070b Browse files » ARM: AM33xx: Add AFI GF board support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
2014-09-19	6deac63 Browse files » ARM: i.MX6: add support for Karo TX6X family ... The Karo TX6X family consists of different i.MX6Q/DL based System-on-Modules. Add support for the TX6u 801x modules, that have an i.MX6DL SoC. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 17 Sep 2014 Sascha Hauer committed on 19 Sep 2014
2014-09-17	33bd1c4 Browse files » arm: imx6: add Gateworks Ventana board ... For now only the Quad 1GB variant is supported. Tested: - starting barebox over USB - writing barebox to NAND with barebox_update - starting Linux kernel over TFTP Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 16 Sep 2014 Sascha Hauer committed on 17 Sep 2014
2014-09-01	906afb5 Browse files » ARM: mvebu: Add Plat'home's Kirkwood Openblocks A6 board support ... This commit adds a new Marvell Kirkwood-based board, by following the currently supported boards. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ezequiel Garcia authored on 23 Aug 2014 Sascha Hauer committed on 1 Sep 2014
2014-08-07	5b7b7ee Browse files » Merge branch 'for-next/metadata' ... Conflicts: arch/arm/dts/Makefile common/Makefile lib/Makefile Sascha Hauer committed on 7 Aug 2014
2014-08-07	fb60ba3 Browse files » make: build device trees with obj-dtb-y and pbl-dtb-y ... To build an object file from a device tree currently we currently have to add them to the Makefile twice, once to dtb-y and once to obj-y. This patch introduces obj-dtb-y and pbl-dtb-y to directly compile a device tree object file for inclusion in the barebox binary or the pbl respectively. The now unneeded dtb-y targets are removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 7 Aug 2014
2014-07-17	cb22c3c Browse files » ARM: i.MX6Q: Add support for Embedsky E9 board. ... This will add support for Embedsky E9 board. It is a small board based on i.MX6 Quad with 2G of RAM. http://en.embedsky.com/product_info.php?cateid=169&id=169 Signed-off-by: Andrey Panov <rockford@yandex.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Panov authored on 15 Jul 2014 Sascha Hauer committed on 17 Jul 2014
2014-07-04	6724928 Browse files » Merge branch 'for-next/marvell' ... Conflicts: arch/arm/boards/Makefile arch/arm/dts/Makefile Sascha Hauer committed on 4 Jul 2014
2014-07-01	f3127d1 Browse files » arm: imx6: rename hummingboard directory to microsom ... The rule in barebox is to name the directories after the modules. As hummingboard is just one of the carriers for the MicroSOM module, name the directory accordingly. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 24 Jun 2014 Sascha Hauer committed on 1 Jul 2014
2014-06-24	74d2423 Browse files » ARM: mvebu: remove dtb Makefile entries ... MULTI_PBL images have a built-in dtb by default. With all MVEBU SoCs converted to MULTI_PBL images, get rid of the extra Makefile rules for appended dtbs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sebastian Hesselbarth authored on 23 Jun 2014 Sascha Hauer committed on 24 Jun 2014
	2450676 Browse files » ARM: mvebu: convert PlatHome Openblocks AX3-4 to PBL_MULTI_IMAGES ... This converts Marvell Armada XP based PlatHome Openblocks AX3-4 to PBL_MULTI_IMAGES. A DT overlay is added to keep possible barebox-specific changes separated and added to lowlevel board init. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sebastian Hesselbarth authored on 12 Apr 2014 Sascha Hauer committed on 24 Jun 2014
	3191033 Browse files » ARM: mvebu: convert Marvell Armada XP GP to PBL_MULTI_IMAGES ... This converts Marvell Armada XP based Marvell Armada XP GP to PBL_MULTI_IMAGES. A DT overlay is added to keep possible barebox-specific changes separated and added to lowlevel board init. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sebastian Hesselbarth authored on 12 Apr 2014 Sascha Hauer committed on 24 Jun 2014
	83a4437 Browse files » ARM: mvebu: convert Globalscale Mirabox to PBL_MULTI_IMAGES ... This converts Marvell Armada 370 based Globalscale Mirabox to PBL_MULTI_IMAGES. A DT overlay is added to keep possible barebox-specific changes separated and added to lowlevel board init. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sebastian Hesselbarth authored on 12 Apr 2014 Sascha Hauer committed on 24 Jun 2014
	f73625b Browse files » ARM: mvebu: convert USI Topkick to PBL_MULTI_IMAGES ... This converts Marvell Kirkwood based USI Topkick to PBL_MULTI_IMAGES. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sebastian Hesselbarth authored on 10 Apr 2014 Sascha Hauer committed on 24 Jun 2014
	9fe5cd5 Browse files » ARM: mvebu: convert Globalscale Guruplug to PBL_MULTI_IMAGES ... This converts Marvell Kirkwood based Globalscale Guruplug to PBL_MULTI_IMAGES. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sebastian Hesselbarth authored on 10 Apr 2014 Sascha Hauer committed on 24 Jun 2014
	198eb8b Browse files » ARM: mvebu: convert Armada 370/XP devices to be probed from DT ... With Armada 370/XP DT files available, convert Armada 370/XP SoC init to register basic devices from DT only. Makefile targets for dtbs will be removed again as soon as MULTI_PBL is available. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sebastian Hesselbarth authored on 10 Apr 2014 Sascha Hauer committed on 24 Jun 2014
	8cd9ede Browse files » ARM: mvebu: convert Kirkwood devices to be probed from DT ... With Kirkwood DT files available, convert Kirkwood SoC init to register basic devices from DT only. Makefile targets for dtbs will be removed again as soon as MULTI_PBL is available. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sebastian Hesselbarth authored on 10 Apr 2014 Sascha Hauer committed on 24 Jun 2014
	75b9860 Browse files » ARM: dts: sort pbl entries by alphabet ... Clean up pbl Makefile entries, that are out of alphabetical order. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sebastian Hesselbarth authored on 23 Jun 2014 Sascha Hauer committed on 24 Jun 2014
2014-06-13	3f0de71 Browse files » ARM: Phytec-phyCORE-imx27: Switch to multiimage support ... Tested on the phyCORE-imx27 to boot on NOR and NAND using the registered update handlers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Jun 2014
2014-06-12	86662f8 Browse files » ARM: PCM038: Switch to devicetree probe ... This patch removes non-DT support for PCM-038/PCM-970 and switch to devicetree probe for these targets. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 5 Jun 2014 Sascha Hauer committed on 12 Jun 2014
2014-06-05	0d6392d Browse files » ARM: AM335x: Beaglebone: Use stripped down devicetree for MLO ... The beaglebone white and black have different devicetrees. Both get linked into the MLO which makes it too big. Use a devicetree generated from am335x-bone-common.dtsi which both board variants can share. This reduces the binary size by about 30k. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Jun 2014
2014-06-05	a2226db Browse files » tegra: add NVIDIA Jetson-TK1 board support ... Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Jun 2014 Sascha Hauer committed on 5 Jun 2014