param: Add support for long long read only dev param ...

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/usb'

Merge branch 'for-next/tegra'

Merge branch 'for-next/net-of-phy'

Merge branch 'for-next/net' ...

Conflicts:
	drivers/net/dm9k.c

Merge branch 'for-next/imx' ...

Conflicts:
	arch/arm/configs/tx25stk5_defconfig

Merge branch 'for-next/doc'

mci: implement non-removable property ...

There is no need to check the card-detect status
for non-removable devices.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: remove now unused of_phy_device_connect ...

Since barebox handles phys from devicetree transparently we no longer
need of_phy_device_connect.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: drop unused USB_UHCI_*_ID macros ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: remove unimplemented usb_get_dev_index() declaration ...

We do not have usb_get_dev_index() function, so remove this declaration.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Drop devicetree merge support ...

I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:

unflatten: too many end nodes

Remove this feature to save the complexity.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Support limiting phy speed in the devicetree ...

Even when both the ethernet controller and the phy support certain
features a board may have additional limitations. Allow specifying
it in the devicetree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

complete: Add devicetree completion ...

The of_* commands take devicetree nodes as parameters. Add a
devicetree completion function to ease passing nodes to these
commands.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: mc13xxx: Allow to set callback for mc13xxx ...

Some boards have to initialize the PMIC before other devices can
be initialized. This requires three levels of initcalls: one level
in which the PMIC is probed, one in which the board can call mc13xxx_get()
and the third one to initialize the PMIC dependent devices.

Allow to register a callback which is called once the PMIC is initialized.
This way mc13xxx_get() is no longer necessary and the number of required
initcalls levels is reduced to two.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

syscon: fix prototype compile error ...

gcc 4.8.3 throws the following error

include/mfd/syscon.h: In function 'syscon_base_lookup_by_pdevname':
include/mfd/syscon.h:22:1: error: parameter name omitted
 static inline void __iomem *syscon_base_lookup_by_pdevname(const char *)

Fix it by adding the name to the function prototype.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: add reset controller framework ...

Add stripped sown version of the reset controller
framework from the Linux kernel.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Allow to use multiple network interfaces at once ...

In barebox network packets always go out at the current ethernet
device and are expected to be received from the current interface.
This has some side effects. When for example an NFS is mounted when
one interface is active and the interface is changed afterwards the
NFS packets leave the new interface, but the NFS server won't be
reachable there.

Instead of changing the whole network traffic to the current ethernet
interface we now initialize a network connection with the current
network interface, but then the connection will continue to use that
interface even when the current interface is changed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Pass eth_device to net_receive ...

So that barebox has the information which interface a packet
came from.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

asm-generic: add IO memory accessors ...

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: fix macro WARN ...

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

stdlib.h: include missed types.h ...

We use 'u32' type in stdlib.h so we have to include types.h.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/tegra' ...

Conflicts:
	arch/arm/dts/tegra20-colibri.dtsi
	arch/arm/dts/tegra20-paz00.dts
	arch/arm/dts/tegra20.dtsi
	drivers/clk/tegra/clk-periph.c

Merge branch 'for-next/rockchip'

Merge branch 'for-next/regulator' ...

Conflicts:
	commands/Makefile

Merge branch 'for-next/ioresource'

Merge branch 'for-next/env'

ARM: dts: add Rockchip devicetree files ...

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>