Merge branch 'for-next/rtc' ...

Conflicts:
	arch/mips/dts/jz4755.dtsi
	commands/Makefile

Add support for metadata in barebox images ...

It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:

- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property

Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.

Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.

There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.

For device tree boards the model and of_compatible tags are automatically
generated.

Example output of the imd tool for a Phytec phyFLEX image:

build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add hwclock ...

The hwclock command allows to query or set the hardware clock (RTC).

Barebox' 'hwclock' command uses busybox' 'date' compatible
time format ccyymmddHHMM[.SS]:

  # /bin/busybox date -s 201407292005.41 ; /bin/date
  Tue Jul 29 20:05:41 MSK 2014
  Tue Jul 29 20:05:41 MSK 2014

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add 'lspci' command ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drvlist: factor the driver list out of 'devinfo' ...

The command 'devinfo' was first spitting out all devices, and then
also all drivers. This patch separates them into two commands,
'devinfo' as before, and also the new command 'drvinfo'

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add of_dump command ...

The oftree command is overloaded. This adds a dedicated command
which only dumps devicetrees to the console so that the corresponding
functionality in the oftree command can be removed in the next step.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: CMD_DIGEST -> COMPILE_DIGEST ...

This config just turned on the compilation of digest.c (used by 'SHA1',
'sha256sum' etc), so name it accordingly.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: CMD_MEMORY -> COMPILE_MEMORY ...

* CMD_MEMORY was defined both in common/Kconfig and commands/Kconfig
* that symbol turned not a command on, but just the compilation of
  commands/mem.c, so rename it accordingly

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/regulator' ...

Conflicts:
	commands/Makefile

Merge branch 'for-next/misc'

Add initial regulator support ...

Provide minimal regulator support. Only supported operations are enabling
and disabling regulators. Association of devices with their regulators is
limited to devicetree only. If regulator support is disabled the API expands
to static inline stubs so consumers can still use the API.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2048: port to barebox ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: Allow for I/O mapped I/O ...

Rework the current framework so that I/O mapped I/O resources are
also possible.

Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add menutree command ...

Creating menus from the shell using the regular 'menu' command is rather
complicated. This adds a 'menutree' command which creates a menu from
a directory structure. In the directory structure each directory corresponds
to a single menu entry. The directory contains the following files:

title -  A file containing the title of the entry as shown in the menu
box -    If present, the entry is a 'bool' entry. The file contains a variable
         name from which the current state of the bool is taken from and saved
         to.
action - if present this file contains a shell script which is executed when
         when the entry is selected.

If neither 'box' or 'action' are present this entry is considered a submenu
containing more entries.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add readf command ...

The readf command is useful to read the content of a file into
a shell variable. It should be used for ascii content and thus
stops reading at all nonprintable characters including newline.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc' ...

Conflicts:
	commands/Makefile

defenv-2: replace boot script with command ...

This replaces the 'boot' script in the defaultenv-2 with a command
with the same behaviour. A command gives more flexibility for future
externsions

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

move devinfo command to its own file ...

Just like nearly all other commands are in individual files.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add new memtest command ...

This new memtest can test the whole unused memory. The new memtest
command try to request the whole unused sdram regions on all banks and
run the mem_test routine from common/memtest.c on it.

The memtest command has only two parameters;
  -i	Amount of iterations, default 1, iteration of 0 is endless.
  -b	Set this to skip integrity check.(Do only a fast test for bus lines)

If MMU support is enable, memtest try to run memtest twice. The first with
cache enabled, the second with cache disabled.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memtest: remove memtest command ...

Remove memtest command.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devices: add detect mechanism ...

We often encounter the situation where slow devices should not be
probed during startup since probing is slow and maybe unnecessary
for unused devices. With MMC we have the 'probe' device parameter,
for ata we have the same, for USB we have the 'usb' command. Overall
this is not very consistent.
With MMC there is the additional problem that the probe parameter
is attached to the logical device when we often have the information
which physical device we want to probe.
This patch adds a 'detect' callback for devices and adds a command
to detect devices and to list the devices which are actually detecable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add memory modify command (mm) ...

As of now we have no way to manipulate individual bits of registers on the
command line. This introduces a memory modify command which allows this. It
has the syntax:

mm [OPTIONS] <adr> <val> <mask>

With [OPTIONS] being the usual memory command options (-b, -w, -l, -d <file>).

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memory commands: separate into one file per command ...

Normally in commands we have one file per command which is named like
the command itself. The memory commands are an exception to this. This
patch changes this by separating the memory commands. This also has the
effect that the memory commands can now be selected individually. Along
the way we add some Kconfig help text for the commmands.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/oftree' ...

Conflicts:
	drivers/of/base.c

Merge branch 'for-next/commands'

commands: Add of_node command ...

This command allows to create/delete device nodes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: Add of_property command ...

The of_property command allows to modify/add/delete properties.
Parsing user input is based on U-Boot code with some fixes added
for catching invalid input.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add let command which supports proper arithmetic ...

This command works like the corresponding Unix shell command and
is used for adding, multiplying and much more.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add ubiformat ...

Imported from mtd-utils and stripped down to needed functionality.
Based on an older version (1.4.5.) since the newer do use MEMWRITE
interfaces which we don't have in barebox (yet).

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ymodem'