spi: atmel_spi: fix duplicate const warning ...

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: atmel_spi: Add DT support ...

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: atmel_spi: Use VERSION register instead of CPU type ...

Use VERSION register instead of CPU type to determine IP block's version
and capabilities. This what corresponding Linux kernel driver does.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: atmel_spi: Configure CS GPIO as output ...

On AT91 GPIOs default to being inputs, so we need to explicitly
configure CS gpio to being an output.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AT91: move iomux definitions to iomux.h ...

mach/gpio.h is for the gpio API, so move unrelated stuff
away.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use new device_platform_driver() macro for drivers ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_spi: fix spi cs gpio request loop ...

it's 0 to num_cs - 1

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

spi: atmel: request cs pin via gpiolib ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_spi: add cs change support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_spi: drop setup during transfer ...

this need to be handle at framework and driver level

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_spi: fix cs support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_spi: add sanity check in setup ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_spi: after setup the cs need to be disable ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_spi: split transfer to atmel_spi_do_xfer ...

This makes the code mre readable

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_spi: use device id as bus num ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

switch all platform_bus device/driver registering to platform_driver/device_register ...

now register_driver and register_device are for bus only usage.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_spi: add mesg->actual_length, so devices can use it for read/write ...

Without this i.e. the m25p driver is not working properly.

Its used to calculate the return value of the read/write function of
some devices. If the value is missing, barebox would always
miscalculate the next transfer sizes.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

introduce io.h ...

To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: add atmel-spi driver ...

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>