LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2012-07-02	1c13676 Browse files » ehci: Fix resource size ... We now have a resource size for the ehci hccr register space. This was assumed to be 0x40 in size. On OMAP though it is only 0x10 and then the hccr resource conflicts with the hcor resource which results in a non working ehci port on beagle and panda boards. This patch adds a nonintrusive workaround, it limits the hccr resource to 0x10, which then also works on OMAP. Later we should drop the multiple resources for the ehci port and make the resource as specified in the datasheets. This is broken since: commit `08845e4` Author: Sascha Hauer <s.hauer@pengutronix.de> Date: Wed May 23 12:54:24 2012 +0200 usb ehci: Add resource sizes add_usb_ehci_device registers resources with size 0. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Jul 2012
2012-06-27	a6e358b Browse files » drivers/base: bail out if request_iomem_region fails ... When request_iomem_region fails we have to bail out instead of dereferencing res->start. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Jun 2012
2012-06-25	2ca512e Browse files » print out resource_size_t correctly ... resource_size_t can be 32bit or 64bit depending on the architecture. Add a define for it to be able to printf a resource_size_t correctly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jun 2012
2012-06-07	9c865c1 Browse files » m25p80: progressbar tweak ... Show progressbar even when erasing just a single sector, otherwise it looks as if erase didn't do anything. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Johannes Stezenbach authored on 6 Jun 2012 Sascha Hauer committed on 7 Jun 2012
	2c25d3e Browse files » m25p80: allow erase to be interrupted ... Check for Ctrl-C before erasing each sector. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Johannes Stezenbach authored on 6 Jun 2012 Sascha Hauer committed on 7 Jun 2012
	0117026 Browse files » m25p80: prevent endless loop in erase ... "erase /dev/myflash0 0+1" erased the whole flash, similar for other value of count if you guessed the erae block size wrong. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Johannes Stezenbach authored on 6 Jun 2012 Sascha Hauer committed on 7 Jun 2012
2012-06-06	497d1c4 Browse files » Merge branch 'next' Sascha Hauer committed on 6 Jun 2012
2012-05-31	08845e4 Browse files » usb ehci: Add resource sizes ... add_usb_ehci_device registers resources with size 0. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 May 2012
2012-05-30	bcbeb21 Browse files » video/s3c24xx.c: fix doxygen comment for s3cfb_activate_var() ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 29 May 2012 Sascha Hauer committed on 30 May 2012
2012-05-23	c907114 Browse files » usb ehci: Use zalloc to allocate ehci structure ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 May 2012
2012-05-23	bd14ede Browse files » usb storage: fix driver name ... We have to set the name in struct usb_driver, not the one in struct driver_d which gets overwritten with usb_driver->name during registration. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 May 2012
2012-05-21	5ef3ecd Browse files » Make S3C24xx config options available for all S3Cs ... Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexey Galakhov authored on 18 May 2012 Sascha Hauer committed on 21 May 2012
2012-05-16	e741110 Browse files » Merge branch 'master' into next Sascha Hauer committed on 16 May 2012
	385c546 Browse files » i.MX SPI: Setup SPI chipselect to inactive state while initializing device ... To avoid unnecessary preset initial state chipselect lines for SPI, set it to inactive state when adding devices to the system. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 16 May 2012 Sascha Hauer committed on 16 May 2012
	0d188ac Browse files » mfd mc13xxxx: Set mc_dev to NULL on failure ... The mc13xxx driver correctly bails out on failure, but leaves mc_dev initialized, so a later mc13xxx_get won't fail but returns an invalid pointer. Fix this. While at it, remove some superfluous code from mc13xxx_get. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 May 2012
2012-05-14	7b5817e Browse files » drivers/spi/spi.c: use DEVICE_ID_DYNAMIC when allocating a struct device_d ... This causes allocation of a free id and avoids conflicts if multiple identical SPI devices are attached. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 14 May 2012 Sascha Hauer committed on 14 May 2012
	932f546 Browse files » Support most Samsung SoCs in S3C serial driver ... Ok, I assume this should go into separate series. It fits both S5PV210 and S3C6410. This adds support for S3C and S5P architectures (all of my knowledge) to the serial driver. Since the only difference between them is in clock handling, this is moved to an arch-dependent separate function. Most modern architectures should define S3C_UART_HAS_UBRDIVSLOT and S3C_UART_HAS_UINTM. This adds support for most Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Juergen Beisewrt <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexey Galakhov authored on 14 May 2012 Sascha Hauer committed on 14 May 2012
	1503fe6 Browse files » ohci-hcd: use dma_flush/inv_range to allow using the driver with enabled MMU ... Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 14 May 2012 Sascha Hauer committed on 14 May 2012
2012-05-13	f9b932f Browse files » fix typo funtion -> function ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 13 May 2012 Sascha Hauer committed on 13 May 2012
2012-05-13	254b183 Browse files » NOR flash: reduce size of cfiword_t if not using 64-bit bus. ... This is done to reduce the binary size a bit. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Krzysztof Halasa authored on 5 May 2012 Sascha Hauer committed on 13 May 2012
2012-04-30	8e6f45f Browse files » complete: add empty complete support ... for cpuinfo, clear, dhcp, false, login, lsmod, meminfo, passwd, pwd, reginfo, reset, true, usb, version for mach-imx and mach-mxs: dump_clocks for u_serial: mycdev Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 30 Apr 2012
	1fa17ad Browse files » complete: add device name complete support for devinfo ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 30 Apr 2012
	79dc70c Browse files » netX/network: fix debug outputs ... If DEBUG is defined it fails due to wrong variable names Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 27 Apr 2012 Sascha Hauer committed on 30 Apr 2012
	eecbcaf Browse files » netX: UART may not initialize correctly. ... The netX internal UART latches register settings and internally uses them only if written in the correct order. Other orders may work, but sometimes the UART gets stuck, as the baudrate has not correctly been set. Signed-off-by: Michael Trensch <MTrensch@gmail.com> Acked-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Trensch authored on 27 Apr 2012 Sascha Hauer committed on 30 Apr 2012
2012-04-24	2893952 Browse files » devinfo: use accessor function for parameters ... Instead of directly accessing the struct member of struct param_d use the provided getter function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Apr 2012
	ba361ee Browse files » Merge branch 'pu/mx6-v2' into next ... Conflicts: arch/arm/Makefile arch/arm/mach-imx/Kconfig Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Apr 2012
	7753263 Browse files » net mii: Add mii_open/mii_close functions ... Some phys need board specific fixups. To be able to do this from board code add mii_open/mii_close functions so that the board can use the regular mii_read/mii_write functions. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Apr 2012
	6f20c7b Browse files » mmc i.MX esdhc: Add i.MX6 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Apr 2012
	86cfd96 Browse files » net fec: Add i.MX6 support ... Currently only 100Mb/s is tested. Freescale's U-Boot suggests that there are some additional adjustments necessary for Gigabit support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Apr 2012
	e0c18c0 Browse files » serial i.MX: i.MX6 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Apr 2012