After add aarch64 support (commit 868df08)
to realocation, MLO on beaglebone black do not boot any more.
The issue is, that addition of offset in one if-case was not done.
This patch fix this.

Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds aarch64 support for relocating binaries linked with -pie.

Support is integrated into the already exisiting
relocate_to_current_adr() function which is now used for both arm32
and aarch64.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The ld_var solves the issue that when compiled with -pie the linker
provided variables are all 0x0. This mechanism however refuses to
compile with aarch64 support.

This patch replaces the ld_var mechanism with a nice little trick
learned from U-Boot: Instead of using linker provided variables
directly with "__bss_start = ." we put a zero size array into
a separate section and use the address of that array instead of
the linker variable. This properly works before relocation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Instead of #ifdefing the correct pgtable header file to include,
include it where it's needed. Also, move the memory type attributes
into there consumers, namely the mmu.c files.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

When we are linked at 0x0 and running at 0x01000000 then
get_runtime_offset() should return 0x01000000 and not 0xff000000. This
makes get_runtime_offset() more consistent and better understandable.

This was tested on a Freescale i.MX53 Quickstart board. Additionally
relocate_to_adr() was tested since that is normally not called.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

flush_icache is a misnomer since the icache is invalidated, not
flushed. Rename the function accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

In barebox_non_pbl_start() we do not run at the address we are linked
at, so we must read linker variables using ld_var(). Since ld_var()
current is not available on arm64 we create two zero sized arrays,
one at the begin of the image and one at the end. The difference
between both is the image size we are looking for.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This file originates in Linux.  Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.

This commit was generated by the following commands:

  find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
  git mv include/sizes.h include/linux/

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

It might be needed in pbl code, so move it to a file which is
compiled in pbl mode.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

For making the same binary executable on different SoCs which have
different DRAM addresses we have to be independent of the compile
time link address.

This patch adds relocatable binary support for the ARM architecture.
With this two new functions are available. relocate_to_current_adr
will fixup the binary to continue executing from the current position.
relocate_to_adr will copy the binary to a given address, fixup the
binary and continue executing from there.

For the PBL and the real image relocatable support can be enabled
independently. This is done to (hopefully) better cope with setups
where the PBL runs from SRAM or ROM and the real binary does not.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>