This commit switches the RaspberryPi arch over to probe Barebox
from the builtin DT and enables multi-image builds.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for ZII VF610 Dev based designs such as:

    - VF610 Dev, revision B
    - VF610 Dev, revision C
    - CFU1, revision A
    - SPU3, revision A
    - SCU4 AIB, revision C

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for the QuadPlus variant of the board as a separate
Barebox binary.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for RDU2 board from Zodiac Inflight Innovations.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for the phycore i.MX6 UltraLite.
 - 512MB RAM
 - 512MB NAND
 - 10/100 Mbit Ethernet

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for VF610 Tower board.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The Auvidea H100 is a baseboard for the SolidRun MicroSOM, which
provides HDMI IN/OUT capabilities.

Currently supported is only a combination of the H100 baseboard
with a i2eX MicroSOM.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

OnRISC Baltos devices are based on a am335x SoC and can be booted
either from MMC or NAND.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The phyCORE-RK3288 aka PCM-059 is a SoM (System on Module)
containing a RK3288 SoC. The module can be connected to different
carrier boards.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Now that the MAX variant of the board is also supported by the
same code, rename the board directory to the more generic nitrogen6.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add Phytec phyCORE-i.MX6 SOM.
  Support:
   - imx6dl-phytec-phycore-som-emmc:
      - 1GB RAM on 1 Bank with 64Bit
      - 10/100MBit Ethernet
      - SPI NOR
      - eMMC
      - SD
      - UART

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for phyBOARD-SUBRA-i.MX6 with phyFLEX-i.MX6 Quad 1GiB on one
bank. This patch factors out the common device tree nodes for the Quad
and Solo variant into 'imx6qdl-phytec-phyboard-subra.dtsi'.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The device tree for the 801x variant only contains displays. The
displays are not part of the SoM, but instead of the baseboard,
so they should be described in a baseboard dts. With this patch
we rather include the common tx6x dtsi file and drop 801x from
the barebox device tree names.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The i.MX6q variant is basically the same as the i.MX6dl variant, just
with another SoC and the usual i.MX6q/i.MX6dl adjustments.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

v7: eof whitespace fixes

A Patch for supporting the Terasic DE0 NANO-SoC with barebox.
The pretty similar Socrates Board was taken as a starting point with pulling
in the memory timings/pinmux from
http://rocketboards.org/foswiki/view/Documentation/AtlasSoCCompileHardwareDesign

Signed-off-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Currently only second stage booting from the vendor U-Boot is tested. I
don't want to flash barebox into NAND yet because UART-booting for
recovery doesn't work for me.

Working so far are:

 - UART
 - networking
 - nand flash

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

*.dtb.lzo are generated during compilatiion, delete them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Also move the initcall to the level matching the name of the
function.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add Phytec phyCORE-i.MX6 SOM.
     - imx6dl-phytec-phycore-som-nand
        - 256GB RAM on 1 Bank with 32Bit
        - 10/100MBit Ethernet
        - NAND
        - SD
        - UART

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add Phytec phyCORE-i.MX6 SOM.
    Support:
     - imx6q-phytec-phycore-som-nand:
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - NAND
        - SD
        - UART

     - imx6q-phytec-phycore-som-emmc
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - eMMC
        - SD
        - UART

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The main idea behind this patch is to avoid redundant code.  Because of
the module similarities of all i.MX6 based phytec boards, we can merge
its code.

The phytec-som-imx6 merges the code of all i.MX6 based phytec SOMs.  So
we will have only one "board" in the barebox for phyCARD-i.MX6 and
phyFLEX-i.MX6.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Now that we have a full set of DRAM configuration entries we can
build images for the full set of modules on Hummingboard.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support support for the i.MX6 Technexion Wandboard. The
board comes in different SoC variants and different amounts of RAM.
The baord type is autodetected based on the SoC type, so all boards
can be supported by the same binary image.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>