2009-12-15 |
rename U-Boot-v2 project to barebox
...
This has been done with the following script:
find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
-e 's/u2boot/barebox/g' \
-e 's/U2Boot/barebox/g' \
-e 's/U-boot V2/barebox/g' \
-e 's/u-boot v2/barebox/g' \
-e 's/U-Boot V2/barebox/g' \
-e 's/U-Boot-v2/barebox/g' \
-e 's/U_BOOT/BAREBOX/g' \
-e 's/UBOOT/BAREBOX/g' \
-e 's/uboot/barebox/g' \
-e 's/u-boot/barebox/g' \
-e 's/u_boot/barebox/g' \
-e 's/U-Boot/barebox/g' \
-e 's/U-boot/barebox/g' \
-e 's/U-BOOT/barebox/g'
find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
xargs -0 -r rename 's/u[-_]?boot/barebox/'
It needs some manual fixup following in the next patch
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 15 Dec 2009
|
2009-10-22 |
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD
committed
on 22 Oct 2009
|
2009-10-20 |
at91: add cpu devices common api
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD
committed
on 20 Oct 2009
|
at91sam9: move to at91
...
this will allow to add at91rm9200 with the same api as done in the kernel
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD
committed
on 20 Oct 2009
|
2009-07-21 |
add a device_d to ethernet devices
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 21 Jul 2009
|
Get rid of DEVICE_TYPE_ETHER usage
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 21 Jul 2009
|
2009-05-18 |
[mac] add force link support
...
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde
committed
on 18 May 2009
|
[macb] clear RMII bit when using plain MII
...
When operating in plain MII mode, the driver assumes the RMII bit not
set. Although this is the power on reset value, clearing this bit helps
when playing with different network setups.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde
committed
on 18 May 2009
|
2009-01-13 |
[macb] use phy_addr supplied by platform data
...
The driver was not using the phy address supplied by the platform
data. With this patch the miiphy.address is set phy addr supplied
by the mac platform data.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde
committed
on 13 Jan 2009
|
2008-08-26 |
macb eth driver: remove barrier() definition
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 26 Aug 2008
|
2008-08-01 |
at91sam ether: Make more configurable via platform_data
...
Pass RMII and phy address via platform data rather than hardcoded.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 1 Aug 2008
|
2008-06-06 |
add macb ethernet driver
Sascha Hauer
committed
on 6 Jun 2008
|