LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers / mci

2014-07-29	366f64f Browse files » mci: core: the sd1.0 card can work in 4 bits mode ... The sd 1.0 card can work in 4 bits mode also. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 29 Jul 2014 Sascha Hauer committed on 29 Jul 2014
2014-06-11	8e89bc5 Browse files » treewide: remove address of the Free Software Foundation ... The FSF address has changed; The FSF site says that address is Free Software Foundation 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA (see http://www.fsf.org/about/contact/) Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 11 Jun 2014 Sascha Hauer committed on 11 Jun 2014
2014-06-05	35a0081 Browse files » mci: tegra: add Tegra124 compatible ... The controller is similar enough to the ones found on earlier generation SoCs to not need any additional changes. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Jun 2014 Sascha Hauer committed on 5 Jun 2014
2014-06-04	f20e3eb Browse files » mci: implement non-removable property ... There is no need to check the card-detect status for non-removable devices. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Jun 2014 Sascha Hauer committed on 4 Jun 2014
2014-05-15	840896e Browse files » mci: tegra: don't set 8bit mode unconditionally ... Those flags should be set from the DT parsing code. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 14 May 2014 Sascha Hauer committed on 15 May 2014
	ce41b64 Browse files » mci: tegra: apply pad autocalibration on T30 ... Needed for SD cards connected to sdmmc1 or sdmmc3 to work properly. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 14 May 2014 Sascha Hauer committed on 15 May 2014
	17a72b1 Browse files » mci: tegra: add reset control ... Enable the driver to reset the device itself. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 14 May 2014 Sascha Hauer committed on 15 May 2014
2014-05-05	7b76317 Browse files » Merge branch 'for-next/tegra' ... Conflicts: arch/arm/dts/tegra20-colibri.dtsi arch/arm/dts/tegra20-paz00.dts arch/arm/dts/tegra20.dtsi drivers/clk/tegra/clk-periph.c Sascha Hauer committed on 5 May 2014
2014-04-29	acb427e Browse files » mci: Add regulator support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
2014-04-23	47ed904 Browse files » mmc: tegra: fix typo ... Missed OR, so we never enabled failure interrupt status bits, which prevented the eMMC detect logic to work properly. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 13 Apr 2014 Sascha Hauer committed on 23 Apr 2014
2014-03-17	0017d4d Browse files » mci: core: Typo fix in printk specifier ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 16 Mar 2014 Sascha Hauer committed on 17 Mar 2014
2014-02-14	9bdef9e Browse files » mci: Fix version handling ... Currently the version defines reflect the digits in the version number. MMC_VERSION_4_41 is defined as 0x441 and MMC_VERSION_4_5 is defined as 0x405. This results in MMC_VERSION_4_5 < MMC_VERSION_4_41 becoming true which was surely not intended. Fix this by redefining the versions as 0x<major><minor><micro>. This makes the string generation more complicated but makes versions comparable again. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Feb 2014
2014-02-03	d3c96d6 Browse files » Merge branch 'for-next/mci' ... Conflicts: arch/arm/boards/tqma53/board.c Sascha Hauer committed on 3 Feb 2014
2014-01-31	8e174d4 Browse files » mci: imx-esdhc: Add i.MX25 compatible entry ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Jan 2014
2014-01-29	078a29d Browse files » mci: imx: Add devicetree probe support ... Only simple probing, no properties supported yet. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Jan 2014
2014-01-15	fa5bdb3 Browse files » mci: imx-esdhc: add DSR support ... having DSR support in mci-core we need a way to forward the DSR value to the driver. Add it to platform data for imx-esdhc TODO: implement the same for other host controller drivers Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Markus Niebel authored on 14 Jan 2014 Sascha Hauer committed on 15 Jan 2014
	f11668f Browse files » mci: add device tree support for DSR ... add optional DSR support. This should go into the kernel, too Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Markus Niebel authored on 14 Jan 2014 Sascha Hauer committed on 15 Jan 2014
	78b9e4e Browse files » mci: add DSR support ... The eMMC and the SD-Card specifications describe the optional SET_DSR command. During measurements at our lab we found that some cards implementing this feature having really strong driver strengts per default. This can lead to voltage peaks above the specification of the host on signal edges for data sent from a card to the host. Since availability of a given card type may be shorter than the time a certain hardware will be produced it is useful to have support for this command (Alternative would be changing termination resistors and adapting the driver strength of the host to the used card.) Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Markus Niebel authored on 14 Jan 2014 Sascha Hauer committed on 15 Jan 2014
2014-01-10	96da216 Browse files » mci: production year for eMMC 4.41 and later ... Year is coded in 4 bits of CID. eMMC 4.41 adds a new interpretation rule: production year for 4.41 cards and newer is between 2010 and 2025 with 0 corresponding to 2013. This fix was inspired by currect kernel code. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Markus Niebel authored on 10 Jan 2014 Sascha Hauer committed on 10 Jan 2014
2014-01-10	98d5fd3 Browse files » mci: Support the correct version for eMMC ... eMMC is available up to version 4.5 but the correct version is not decoded. Change version definitions to support more minor verions, add missing versions and parse the minor versions from ext_csd. After this, card detection code and devinfo reports correct versions. Handling is inspired by u-boot code. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Markus Niebel authored on 10 Jan 2014 Sascha Hauer committed on 10 Jan 2014
2013-12-06	6d8a85d Browse files » Merge branch 'for-next/tegra' Sascha Hauer committed on 6 Dec 2013
	ed039cd Browse files » Merge branch 'for-next/omap-drivers' Sascha Hauer committed on 6 Dec 2013
	6d7fae1 Browse files » Merge branch 'for-next/omap-devicetree-prepare' Sascha Hauer committed on 6 Dec 2013
	e9ea6ee Browse files » Merge branch 'for-next/misc' ... Conflicts: scripts/Makefile Sascha Hauer committed on 6 Dec 2013
2013-12-04	5f9dea9 Browse files » tegra: add SDMMC controller driver ... Confirmed working on Tegra 2, may need some small adjustments for Tegra 3. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
2013-12-02	35d64bb Browse files » mmci: add missing depends on ARM_AMBA ... The mmci implementation uses some specific arm amba functions, so add a depends on ARM_AMBA. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Aring authored on 27 Nov 2013 Sascha Hauer committed on 2 Dec 2013
2013-11-27	03d601d Browse files » mmc: omap: Add devicetree support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2013
2013-11-25	8cf6128 Browse files » mmc: omap: name mmc device after devicetree alias ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Nov 2013
2013-11-18	32a5775 Browse files » barebox: remove double semicolons ... Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Aring authored on 14 Nov 2013 Sascha Hauer committed on 18 Nov 2013
2013-11-18	fbe83cf Browse files » mmci: remove include of mmci.h header ... We need #include "mmci.h" only and not #include <mmci.h> which don't exists. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Aring authored on 17 Nov 2013 Sascha Hauer committed on 18 Nov 2013