ARM: at91: remove unused defines ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: separate restart handler registration into SoC specific code ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: make at91sam926x_board_init board specific ...

The base addresses used in at91sam926x_board_init() differ with each
SoC. The board knows which SoC we are running on though, so create and
use SoC specific variants of these functions which pass the appropriate
base addresses to at91sam926x_board_init().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: drop at91_pmc_write()/at91_pmc_read() ...

at91_pmc_write() and at91_pmc_read() need a compile time base address,
so remove them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91rm9200ek: use plain readl/writel for pmc accesses ...

at91_pmc_write() needs a compile time base address, so rather use plain
read/writel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91sam926x use writel rather than pmc accessor function ...

The pmc accessor function depends on a compile time base address, so
rather use writel directly. In this case we can hardcode the base
address again since all at91sam926x SoCs have the same pmc base address.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: remove mach/io.h ...

Remove at91_sys_read() and at91_sys_write() since these are no longer
used. This makes mach/io.h empty so remove that aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91rm9200 timer: Make system timer defines SoC specific ...

- rename at91_st.h to at91rm9200_st.h
- rename prefix from AT91_ to AT91RM9200_
- remove register offset from System timer defines

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91rm9200 timer: remove unused include ...

at91rm9200_time.c doesn't need anything from at91_pmc.h, remove the
inclusion.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: remove unused header file ...

nothing from mach/at91_tc.h is used, remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91rm9200: Add SoC namespace to memory controller defines ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: Use SoC specific base addresses where appropriate ...

Replace AT91_ base addresses with their SoC specific variants where
possible.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: Add SoC namespace to matrix defines ...

Add SoC namespace to matrix define so we have one source less of
conflicting defines.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: remove common matrix header file ...

The common matrix header file can be removed when the users include the
SoC specific one. Fix the only user and remove the file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: consolidate phy reset functions ...

Many boards have the same ethernet phy reset function, so share the code
in a common function.
While at it remove the AT91_RSTC offset from the rstc register defines.
AT91_RSTC was the offset between the AT91_SYSTEM_BASE and the reset
controller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: remove AT91_SDRAM_BASE ...

AT91_SDRAM_BASE is only used in board code which known the SDRAM base
address, so we do not need a common define.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: drop AT91_NB_USART ...

AT91_NB_USART only used to return an error from at91_register_uart() if
an invalid UART number is passed. This will never happen as the linker
fails earlier in that case, so the runtime check can be removed and with
it the now unused AT91_NB_USART define.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: remove unused defines ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91sam926x: Add header for at91sam926x common base addresses ...

There are some base addresses common to at91sam926x. Add a separate
header for these.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91rm9200ek: Use SoC specific defines ...

Use AT91RM9200_BASE_PIOC rather than AT91_BASE_PIOC so we can get rid of
the latter later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: remove unused CONSISTENT_DMA_SIZE defines ...

CONSISTENT_DMA_SIZE is unused, remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: remove unused AT_DMA_ID_ defines ...

The defines are unused and not properly namespaced, so remove them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: Add initial support for the EVB-KSZ9477 eval board ...

The EVB-KSZ9477 is an evaluation board for the KSZ9477 ethernet switch.
This board is equipped with a atsama5d3 SoC with 256MiB of SDRAM, 256MiB
of NAND flash and a SD card slot.

For now only second stage booting is supported with AT91bootstrap as
first stage loader.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: at91: fix sdram controller init ...

e739663535 confused parameters to __raw_writel. The value and the base
address was mixed up.

Fixes: e739663535 (arm: at91: code cleanup in at91sam926x_board_init)

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/socfpga'

Merge branch 'for-next/imx'

i.MX: Add support for ZII's i.MX7D-based RPU2 board ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX7: bbu: Add I2C and SPI handler ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX7: bbu: Add MMC boot handler ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX7D: DCD: Create shared DDR configuration header ...

Create a shared DDR configuration header based on configuration used
by i.MX7D SabreSD board.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>