2015-05-05 |
net: phy: Do not double remove phy device
...
This fixes: 80264a8 driver: Call bus->remove instead of driver->remove
On mvebu it happens that:
Upon device shutdown, when iterating through the active device list,
the phy0 device is removed before mdio-mvebu. Then, when the mdio bus
device is removed, the phy0 device is removed again, here:
mdio_bus_remove(on mdio-mvebu)
mvebu_mdio_remove
mdiobus_unregister
unregister_device
mdio_bus_remove(on phy0)
Fix this by setting the mdio busses phy_map[phy->addr] to NULL when
unregistering the phy device, so that mdiobus_unregister no longer
finds a valid phy_device when iterating over the busses device list.
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Sascha Hauer
committed
on 5 May 2015
|
2014-05-21 |
net: phy: Support limiting phy speed in the devicetree
...
Even when both the ethernet controller and the phy support certain
features a board may have additional limitations. Allow specifying
it in the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 21 May 2014
|
net: phy: register phys specified in devicetree
...
When a mdio bus has a device node attached then register the phys
specified there. This makes it possible to lookup the phys using
phandles later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 21 May 2014
|
net: phy: move setting of phy_map to phy_register_device
...
The phy_map should be valid once a phy_device is registered. This
allows registering phys outside of mdiobus_scan.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 21 May 2014
|
2014-01-06 |
miitool: change behaviour closer to linux' mii-tool
...
miitool without arguments will try to show status for all phys.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Antony Pavlov
authored
on 25 Dec 2013
Sascha Hauer
committed
on 6 Jan 2014
|
2013-12-11 |
net: phy: implement detect callback for miibus devices
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 11 Dec 2013
|
net: phy: Track mii buses on a list
...
To be able to iterate over registered mii buses
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 11 Dec 2013
|
net: phy: move phy_init_hw to phy_device_connect
...
This is needed when a phy gets registered outsize of phy_device_connect
but has to be attached to an ethernet device later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 11 Dec 2013
|
net: phy: cleanup attached device handling
...
phy_register_device() currently requires an attached ethernet device.
This is not needed, a phy device can equally well be registered as
a standalone device without an ethernet device. Remove the need
for an attached ethernet device in phy_register_device. Also, make
the edev <-> phy connection on a registered device which simplifies
the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 11 Dec 2013
|
2013-11-25 |
net: phy: Fix get_phy_device return value
...
A function should either return an ERR_PTR or NULL on failure, but not both.
Let get_phy_device() return an ERR_PTR and fix the return checks in mdiobus_scan
and phy_device_connect.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 25 Nov 2013
|
2013-04-11 |
treewide: Use dev_add_param_int_ro where possible
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 11 Apr 2013
|
2013-02-25 |
phy: fix force mode
...
do not try to read the status in force mode
the link is up
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
authored
on 24 Feb 2013
Sascha Hauer
committed
on 25 Feb 2013
|
2012-12-12 |
drivers/base: fix corrupt device tree
...
dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:
| commit c2e568d
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date: Sat Nov 3 16:11:05 2012 +0100
|
| bus: add bus device
|
| automatically add it as parent of any bus device if none already specified
|
| we have now a nice output per bus
If for example a FATfs is mounted this nice output per bus often ends with:
> `---- fat0
> `---- 0
> `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
> `---- sram00
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>] lr : [<87f08a04>]
> sp : 86eff8c0 ip : 87f3fbde fp : ffffffff
> r10: ffffffff r9 : 00000000 r8 : 00000003
> r7 : 86f075b8 r6 : 00000002 r5 : ffffffec r4 : 86f07544
> r3 : 00000000 r2 : 43f900b4 r1 : 00000020 r0 : 00000005
> Flags: Nzcv IRQs off FIQs off Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)
This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>
Sascha Hauer
committed
on 12 Dec 2012
|
2012-11-20 |
phylib: add fixup support
...
if board need specific phy fixup they can register it and then the code will
executed only if needed
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
authored
on 18 Nov 2012
Sascha Hauer
committed
on 20 Nov 2012
|
mdio_bus: fix match
...
on barebox we have the weird way the return 0 true on bus match
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
authored
on 18 Nov 2012
Sascha Hauer
committed
on 20 Nov 2012
|
2012-11-19 |
phylib: introduction of forced 100Mbps
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
authored
on 16 Nov 2012
Sascha Hauer
committed
on 19 Nov 2012
|
phylib: export phy_id via param
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
authored
on 16 Nov 2012
Sascha Hauer
committed
on 19 Nov 2012
|
2012-11-07 |
mdiobus: do not scan the bus at registration time
...
Scanning the bus can take some time. If we do not need the ethernet
device, this is unnecessary, so delay the scan until the phy device
iactually is needed.
Andread Pretzsch: Fixup bug in scanning for all devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
Sascha Hauer
committed
on 7 Nov 2012
|
2012-10-30 |
mdiobus: return existing phydev in mdiobus_scan
...
Test if we already found a phy device on an address earlier and return
it if it exists. This makes it possible to call mdiobus_scan multiple
times.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 30 Oct 2012
|
2012-10-04 |
net mdio_bus: Add missing bus_register
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 4 Oct 2012
|
2012-09-25 |
net: introduce phylib
...
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD
authored
on 9 Aug 2012
Sascha Hauer
committed
on 25 Sep 2012
|