The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97
("Remove the CREDITS file"). Remove references to it from several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

We used to pass a device tree pointer to
imx*_barebox_boot_nand_external(). This no longer works since we compile
barebox with -fPIE.

The problem is that we only have the first 2KiB of the image available
when we start from NAND. The pointer to the device tree is not valid
yet. This hasn't been a problem because the pointer is only used later
when we have the full image in SDRAM. With -fPIE though the actual
pointer is derived indirectly through another pointer, and that pointer
to the pointer is also not valid which causes an invalid pointer to
the device tree later.

This is solved by splitting the NAND boot functions up into two
functions. With imx*_nand_relocate_to_sdram() the board code relocates
the image out of the NFC SRAM into SDRAM. From that point on the device
tree pointer can be accessed and the board can load the image using
imx*_nand_load_image() and can afterwards pass control to barebox
passing whatever device tee pointer it likes.

Fixes: b0348d677b ("ARM: Compile with -fPIE")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Most callers of arm_setup_stack substract a fixed offset of 8, 12 or 16
bytes from the stack top. This is unnecessary as on ARM we have a stack
that decrements before storing values. Substracting this offset probably
goes back to the U-Boot version we forked from. Stop this now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

barebox_arm_reset_vector() is a global function but we never provided a
prototype anywhere. The prototypes differ for the different boards, so
to provide a common prototype we must harmonize them.

void barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)

Should be suitable for all boards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This allows imx*_barebox_entry to use the stack.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Mostly to make it clear that boarddata needs to be
something we can dereference.

As this is a pretty invasive change, use the opportunity
to make the signature 64bit safe.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Which bootmode is selected has no longer to be chosen by Kconfig. The
boards can decide themselves which bootmode they want to support. This
makes it unnecesary to ask the user which bootmode shall be supported,
so the "Select boot mode" becomes invisible and both support will be
compiled in as needed by the boards. NAND_IMX_BOOT goes away and the
already existing ARCH_IMX_EXTERNAL_BOOT_NAND can now be used for the
boards to depend on external nand boot.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To let the architectures override asm-generic/sections.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset is confusing with the cpu reset and impossible to grep

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Most i.MX boards can use the imx*_barebox_entry functions. The remaining
(i.MX21, i.MX6) use hardcoded base addresses.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use helper function for external NAND boot to get some positive
diffstat.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	arch/arm/boards/guf-neso/lowlevel.c
	arch/arm/boards/pcm038/lowlevel.c
	commands/Makefile

- remove now unused __REG definitions
- include individual SoC register files instead of imx-regs.h
- move IMX_GPIO_NR to generic.h
- finally remove imx-regs.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This redefines the sdram controller registers as offsets to the base
rather than as absolute addresses. All users are fixed to use the
SoC specific base address.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

We have enough places which setup0 a stack to justify
a static inline function for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	arch/arm/cpu/start-reset.c
	arch/arm/include/asm/barebox-arm.h
	arch/arm/mach-omap/Kconfig
	arch/arm/mach-omap/omap3_core.S

On some SoCs (for example AM35xx), the ROM bootloader passes useful
information in r0 when jumping to barebox.

To avoid overwriting this in the generic reset code, we introduce
common_reset as a C function and as an assembler macro. This is then
called form the reset entry point (either in common or in board code).

This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

With compressed image support TEXT_BASE will become the base
address of the uncompressed image. What the boards want instead
is the base address of the decompressor code or, if not compressed,
the base address of the uncompressed image. Use _text which is
the correct one for both cases.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

- support NAND external boot
- enable only used clocks
- LCD fix in /env/bin/init
- I2C support
- SDCard support
- USB Host 1 support
- DFU support on OTG port
- update defconfig

Signed-off-by: Eric Bénard <eric@eukrea.com>

this will allow each arch to handle the boards more simply and depending on
there need

the env var BOARD will refer to the current board dirent

for sandbox as we have only one board the board dirent is arch/sandbox/board

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>