LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / boards / karo-tx25 / board.c

2020-04-27	cd24f63 Browse files » treewide: remove references to CREDITS ... The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97 ("Remove the CREDITS file"). Remove references to it from several files. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 23 Apr 2020 Sascha Hauer committed on 27 Apr 2020
2019-09-12	3b6f72f Browse files » video: imxfb: make pcr and bpp per-display settings ... These settings used to be specified per-mode. But the device tree bindings have these two values attached to the display and not to each mode. Also for the supported boards it doesn't matter as they all only have a single mode. This is preparatory work to add devicetree support for the imxfb driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 9 Sep 2019 Sascha Hauer committed on 12 Sep 2019
2015-01-08	d875357 Browse files » sizes.h: move include/sizes.h to include/linux/sizes.h ... This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' \| xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masahiro Yamada authored on 8 Jan 2015 Sascha Hauer committed on 8 Jan 2015
2014-02-01	021890a Browse files » ARM: i.MX: Karo TX25: Switch to multiboard support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2014
2014-01-31	23f23a7 Browse files » ARM: i.MX25: Karo TX25: Switch to devicetree support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Jan 2014
2014-01-23	ecf4da5 Browse files » ARM: Karo TX25: register external NAND boot update handler ... To be able to update barebox with the barebox_update command. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Jan 2014
2014-01-06	cee2a60 Browse files » ARM: remove armlinux_set_bootparams() calls from boards ... As the place for the atags now is determined automatically the call from the boards can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Jan 2014
2013-09-05	1729b17 Browse files » Merge branch 'for-next/boardinfo' ... Conflicts: arch/mips/boards/qemu-malta/init.c commands/bootm.c drivers/of/base.c Sascha Hauer committed on 5 Sep 2013
2013-08-16	1081856 Browse files » ARM: include <gpio.h> instead of <mach/gpio.h> ... The gpio api should be used from <gpio.h> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Aug 2013
2013-08-16	068bed2 Browse files » Set model and hostname at boardlevel ... With multiboard support the compiletime generated BOARDINFO string gets more and more meaningless. This removes it from Kconfig and replaces it with a variable that can be set at boardlevel. Also many boards have a standard setting for the hostname in the environment. This patch also moves the standard to C code by calling barebox_set_hostname(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Aug 2013
2013-04-04	45b8792 Browse files » Merge branch 'for-next/misc-arm' Sascha Hauer committed on 4 Apr 2013
2013-03-10	9eefa74 Browse files » include asm/sections.h instead of asm-generic/sections.h ... To let the architectures override asm-generic/sections.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Mar 2013
2013-03-09	e9e5919 Browse files » net: fec: use standard phy type defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Mar 2013
2013-01-21	f791295 Browse files » Merge branch 'pu/imx-external-nand-boot' into for-next/imx Sascha Hauer committed on 21 Jan 2013
2013-01-20	6345f19 Browse files » ARM i.MX boards: use helper function for external NAND boot ... Use helper function for external NAND boot to get some positive diffstat. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2013
2013-01-18	53d9623 Browse files » ARM Ka-Ro TX25: Increase NAND partitions ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Jan 2013
2012-12-06	78c3c91 Browse files » ARM i.MX boards: use esdctl code to detect sdram size ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Dec 2012
2012-10-17	b1b76f6 Browse files » ARM i.MX: get rid of imx-regs.h ... - remove now unused __REG definitions - include individual SoC register files instead of imx-regs.h - move IMX_GPIO_NR to generic.h - finally remove imx-regs.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Oct 2012
2012-10-17	1092bde Browse files » ARM i.MX25: Cleanup remaining unprefixed registers ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Oct 2012
2012-10-05	306f58f Browse files » ARM i.MX boards: Use IMX_GPIO_NR ... Rather than GPIO_PORT* which will vanish. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Oct 2012
2012-10-04	ed07306 Browse files » ARM i.MX25: give register base addresses a proper MX25_ prefix ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Oct 2012
2012-09-17	77322aa Browse files » Treewide: remove address of the Free Software Foundation ... The FSF address has changed in the past. Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Sep 2012
2012-07-23	244198e Browse files » ARM boards: Use _text rather than TEXT_BASE ... With compressed image support TEXT_BASE will become the base address of the uncompressed image. What the boards want instead is the base address of the decompressor code or, if not compressed, the base address of the uncompressed image. Use _text which is the correct one for both cases. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Jul 2012
2012-05-13	714c20c Browse files » Removed duplicate definition for DEVFS_PARTITION_xxx ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 13 May 2012 Sascha Hauer committed on 13 May 2012
2012-04-12	652f5f5 Browse files » ARM i.MX iomux-v3: Sync to kernel ... This means using an uint64_t instead of a struct pad_desc which allows us to change pad settings using logic operations. Also with this we can more easily keep the iomux tables in sync with the kernel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Apr 2012
2012-03-13	baa2305 Browse files » imx_nand_load_image: change all users to use barebox_image_size ... Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 9 Mar 2012 Sascha Hauer committed on 13 Mar 2012
2012-01-05	ef191db Browse files » video imx: specify num_modes in platform_data ... Without num_modes the imx fb driver won't work. Specify this in the boards and also bail out in the driver when num_modes is unspecified. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Jan 2012
2011-09-22	3ee7877 Browse files » introduce io.h ... To allow for some generic io accessors introduce io.h and use this instead of asm/io.h throughout the tree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Sep 2011
2011-08-03	a6c333c Browse files » ARM boards: remove now unnecessary mmu calls ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Sascha Hauer committed on 3 Aug 2011
2011-08-01	f9f35ee Browse files » ARM boards: move sdram setup before mmu setup ... The new MMU setup will need SDRAM base addresses and sizes. For this reason convert the MMU enabled ARM boards: - move mem setup to mem_initcall. This is early but still makes sure that we already have the console available - move MMU setup in this initcall temporary as after the mmu_init will generic Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Sascha Hauer committed on 1 Aug 2011