The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97
("Remove the CREDITS file"). Remove references to it from several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

We have many different pointer arrays which we put into linker sections
and each time there's one added we have to adjust all linker scripts.
This adds a common RO_DATA_SECTION define and uses it for all
architectures. This makes it easier to add a new linker array.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

No need to repeat the pci fixup sections in each linker script. Add a
define for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

For the older section defines we specify the start and end addresses
outside the macro which means we have to repeat them in each linker
script. Make the start/end addresses part of the define to simplify
things. While at it, add a BAREBOX_ prefix to the INITCALLS and EXITCALLS
macros for consistency to the other defines.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

The BAREBOX_CLK_TABLE and BAREBOX_DTB macros are defines that do not
take a parameter, so we can remove the braces.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This is a cut down version of the Linux kernel PCI quirk infrastructure,
which allows to register and execute some fixups before the driver is
loaded.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The ld_var solves the issue that when compiled with -pie the linker
provided variables are all 0x0. This mechanism however refuses to
compile with aarch64 support.

This patch replaces the ld_var mechanism with a nice little trick
learned from U-Boot: Instead of using linker provided variables
directly with "__bss_start = ." we put a zero size array into
a separate section and use the address of that array instead of
the linker variable. This properly works before relocation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The RATP implementation now allows executing generic commands with a
binary interface: binary requests are received and binary responses
are returned.

Each command can define its own RATP request contents (e.g. to specify
command-specific options) as well as its own RATP response contents
(if any data is to be returned).

Each command is associated with a pair of numeric unique request and
response IDs, and for easy reference these IDs are maintained in the
common ratp_bb header. Modules may override generic implemented
commands or include their own new ones (as long as the numeric IDs
introduced are unique).

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

On ARMv7 the exception vectors inside the barebox binary are used directly
by remapping the vectors base through the VBAR register. While VBAR allows
to remap the exception vectors freely, it still imposes a minimum alignment
of 32 byte, as the lower bits are treated as the exception vector offset.
Enforce this alignment inside the barebox binary.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch contains the barebox implementation for the ARM
"Power State Coordination Interface" (PSCI).

The interface is aimed at the generalization of code in the following
power management scenarios:
* Core idle management.
* Dynamic addition and removal of cores, and secondary core boot.
* big.LITTLE migration.
* System shutdown and reset.

In practice, all that's currently implemented is a way to enable the
secondary core one some SoCs.

With PSCI the Kernel is either started in nonsecure or in Hypervisor
mode and PSCI is used to apply power to the secondary cores.

The start mode is passed in the global.bootm.secure_state variable. This
enum can contain "secure" (Kernel is started in secure mode, means no
PSCI), "nonsecure" (Kernel is started in nonsecure mode, PSCI available)
or "hyp" (Kernel is started in hyp mode, meaning it can support
virtualization).

We currently only support putting the secure monitor code into SDRAM,
which means we always steal some amount of memory from the Kernel.
To keep things simple for now we simply keep the whole barebox binary in
memory

The PSCI support has been tested on i.MX7 only so far. The only
supported operations are CPU_ON and CPU_OFF.

The PSCI and secure monitor code is based on the corresponding U-Boot
code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

In barebox_non_pbl_start() we do not run at the address we are linked
at, so we must read linker variables using ld_var(). Since ld_var()
current is not available on arm64 we create two zero sized arrays,
one at the begin of the image and one at the end. The difference
between both is the image size we are looking for.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This commit create a common directory, lib/,
for arm and arm64 common code.

It also create lib32/ and lib64/ for 32bit
and 64bit code respectively.

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>