treewide: remove references to CREDITS ...

The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97
("Remove the CREDITS file"). Remove references to it from several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/zynq'

Merge branch 'for-next/zii'

Merge branch 'for-next/usb'

Merge branch 'for-next/spi'

Merge branch 'for-next/pwm'

Merge branch 'for-next/net'

Merge branch 'for-next/misc'

Merge branch 'for-next/layerscape'

Merge branch 'for-next/kalray-coolidge'

Merge branch 'for-next/dfu'

clk: at91: sckc: fix off-by-1000 in udelay() ...

SECOND is the number of nanoseconds in a second, but we need
the number of microseconds for use in udelay. Use USEC_PER_SEC.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: port Linux v5.6 SAM9X60 (new ARM926EJ-S) clock support ...

During a bug hunt that ultimately turned out unrelated to the state
of the barebox at91 clk driver, I synchronized its state with Linux v5.6.

Bug fixes and clean up to minimize the diff were split out in separate
prior commits.  This last commit imports the rest, which is basically
support for Microchip's new ARM926EJ-S SoC, the SAM9x60.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: add sama5d2 audio PLL support ...

Commit 7310b976 ("clk: at91: fix compilation errors in sama5d2.c") and
follow-up commit ca3077068c ("clk: at91: delete dead i2s/audio code")
had deleted the i2s/audio clock related parts of the upstream driver.

This was mostly due to unwillingness on my part to understand the code
enough for porting them and because I deemed them unnecessary to support
in barebox. The former has changed and the latter is not totally true as
audio PLL derived clocks may be muxed as inputs for programmable and
generated clocks.

Port them over and mimize the diff to upstream.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: allow 24 Mhz clock as input for PLL ...

The PLL input range needs to be able to allow 24 Mhz crystal as input
Update the range accordingly in plla characteristics struct

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568183622-7858-1-git-send-email-eugen.hristev@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: c561e41ce4d2 ("clk: at91: add sama5d2 PMC driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[afa: ported to barebox from Linux commit 81a6b601f9f49]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: Mark struct clk_range as const ...

It's just some static data that doesn't get changed after being used.
Mark it const everywhere.

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[afa: ported to barebox from Linux commit 7b4c162e03d47e0]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: add __init marker where appropriate ...

While redundant in barebox, it makes our diff to the upstream driver
smaller when synchronizing, so add it back.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: compile dt-compat for all platforms that require it ...

We have so far compiled in dt-compat only for CONFIG_SOC_SAMA5D3,
but we require it for device tree support of CONFIG_SOC_AT91SAM9
as well. Fix this.

While at it move around the obj- rules a bit to minimize the diff to
upstream.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: delete no-longer required DT compat code ...

Unlike Linux, we don't require barebox drivers to support old device
tree bindings. Following device tree compatibles are no longer present
in barebox latest import of dts/:

 * atmel,sama5d2-clk-generated
 * atmel,sama5d4-clk-h32mx
 * atmel,at91sam9g45-clk-pll
 * atmel,at91sam9g20-clk-pllb
 * atmel,at91sam9260-clk-slow

Drop their compat code.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: fix possible deadlock ...

Lockdep warns about a possible circular locking dependency because using
syscon_node_to_regmap() will make the created regmap get and enable the
first clock it can parse from the device tree. This clock is not needed to
access the registers and should not be enabled at that time.

Use the recently introduced device_node_to_regmap to solve that as it looks
up the regmap in the same list but doesn't care about the clocks.

Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[afa: ported to barebox from from Linux commit 6956eb33abb5dea]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: fix masterck name ...

The master clock is actually named masterck earlier in the driver. Having
"mck" in the parent list means that it can never be selected.

Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver")
Fixes: a2038077de9a ("clk: at91: add sama5d2 PMC driver")
Fixes: 084b696bb509 ("clk: at91: add sama5d4 pmc driver")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[afa: ported to barebox from Linux commit 65a91e2e597dea]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: migrate to SPDX-License-Identifier use ...

Some of these are a product of source sync with Linux, the other were
done with macro assistance by searching for /later/, deleting license text,
adding appropriate SPDX-License-Identifier and manual post-review.

Devices without a license indicated where assumed GPL-2.0-only according
with the project's license.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: implement clk_register_fixed_rate ...

We lack a way to instantiate a fixed clock while specifying a parent.
This is used in the at91 clock code sync with upstream in a later
commit, so prepare by porting clk_register_fixed_rate.

It's based on the Linux commit of the same name with the difference that
it doesn't use (and thus doesn't require) a struct device_d * as first
parameter.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: port Linux of_get_compatible_child helper ...

Incoming Linux code port makes use of the helper. Add it now instead of
having to open-code it later.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: use cpu_relax() where appropriate ...

Instead of doing /* cpu_relax(); */ barrier(); on upstream uses of
cpu_relax(), just use the new cpu_relax() #define directly.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

regmap: retire of_node_to_regmap in favor of device_node_to_regmap ...

device_node_to_regmap is the current upstream API for this and is more
general, because it allocates a regmap on demand if none exists.

As of_node_to_regmap is unused anywhere, remove it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: syscon: implement device_node_to_regmap ...

Extend our syscon API with a device_node_to_regmap function that has the
same semantics as upstream:

 __________________________________________________________________________
| Linux commit 39233b7
| CommitDate: Thu Aug 8 15:30:07 2019 -0700
|
| mfd/syscon: Add device_node_to_regmap()
|
| device_node_to_regmap() is exactly like syscon_node_to_regmap(), but it
| does not check that the node is compatible with "syscon", and won't
| attach the first clock it finds to the regmap.
|
| The rationale behind this, is that one device node with a standard
| compatible string "foo,bar" can be covered by multiple drivers sharing a
| regmap, or by a single driver doing all the job without a regmap, but
| these are implementation details which shouldn't reflect on the
| devicetree.
|
| Signed-off-by: Paul Cercueil <paul@crapouillou.net>
| Acked-by: Arnd Bergmann <arnd@arndb.de>
| Signed-off-by: Paul Burton <paul.burton@mips.com>
|__________________________________________________________________________

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: syscon: refactor of_syscon_register compatible check ...

Linux also provides a device_node_to_regmap function that doesn't do a
compatible = "syscon" check. In preparation for having it in barebox,
factor out the compatible check into the callers.

While at it make the clock checking explicit, so the diff clearly
indicates, we touched all instances and to prepare for follow-up
commits.

No functional change.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: syscon: enable specified clocks on syscon_base_lookup_by_phandle ...

Since commit b36b7b72 ("mfd: syscon: clock peripheral if specified in
device tree"), we now clock syscons during access if the device tree nodes
indicate a clocks property. We haven't been doing this for
syscon_base_lookup_by_phandle though, because we did this as part of the
regmap access functions, but that function returns a direct pointer to
the MMIO region.

The best way forward is probably dropping the syscon_base API altogether
and change users to the regmap API instead, but for now, make the behavior
consistent by enabling it permanently.

This makes use safe from breakage that results from upstream device trees moving
a clock from the consumer to the syscon provider (like in [1])

I've reviewed the current driver code users of syscon_base_lookup_by_phandle
and all upstream device trees that match against the drivers lack
a clocks property, so this shouldn't alter behavior (for now).

[1]: c9322d4fe ("net: designware: eqos: stm32: drop no longer needed syscfg-clk")

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: double-quote the menu prompt of MFD ...

Linux commit 801b27db4638 ("kconfig: drop T_WORD from the RHS of
'prompt' symbol") requires every prompt to be quoted even if it is
a single word.

This is the only place with no quoting. It must be surrounded by
double-quotes in order to sync Kconfig to Linux 5.6-rc1 or later.

While I was here, I reworded "MFD" to "Multifunction device drivers"
to be consistent with Linux.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>