treewide: remove references to CREDITS ...

The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97
("Remove the CREDITS file"). Remove references to it from several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: introduce driver data ...

From b1cb4bb Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sat, 6 Jan 2018 14:33:53 +0100
Subject: [PATCH] atmel_lcdfb: introduce driver data

Introduce driver data like known from the kernel.
This allows us to get rid of the hack where the
intensity bit support was included in the lcd wiring mode.
(No longer any support for IBGR, IRBG)

It has the nice side-effect that all places where we test
for hacks can now use flags and not a set of cpu's.
So we keep all the configuration in one place.

The configuration is included for non-DT users.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: add DT support ...

Some boards use "have_intensity_bit". To support this the
syntax for lcd_wiring_mode was extended to include this info.
This is an extension compared to the documented bindings,
and an extension the kernel does not support (yet).

The binding documents that there can be more than one gpio to
power on/off the display but current implmentation supports only
one gpio. There are no users that requires more than one gpio
so this is good enough.

The clk name used for hclk differs from device trees and
platform data. We could rename the clocl used in platform data
but the name "hclk" is not unique.

Configure clockname based on configuration method.
Devicetree => hclk
Platform data => hck1

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: move pdata init to a separate function ...

Keep atmel_lcdc_register() readable by separating out
pdata handling in a helper function

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: define power_control gpio in platform_data ...

Simplify board specific code by specifying the power_control
gpio direct in platform data.
Move registration of the GPIO to the driver so we no longer
need to duplicate this for each board.

As an intended side-effect there is no longer
any references to platform_data outside atmel_lcdc_register()
so remove it from struct atmel_lcdfb_info

The implementation assumes that GPIO=0 is the same as no power control.
This prevents us from using any GPIO=0 for power control,
but this is not considered a problem for current users.
Future DT users will not have this limitation.

This commit include a fix so we will actually power
down if requested. Previously this was hardcoded to ON.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: move lcd_wiring_mode, have_intensity_bit to local data ...

Copy lcd_wiring_mode and have_intensity_bit to
atmel_lcdfb_info to minimize dependency on the
atmel_lcdfb_platform_data.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: move dmacon, lcdcon2 to local data ...

Copy dmacon + lcdcon2 to atmel_lcdfb_info to minimize
dependency on the atmel_lcdfb_platform_data.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: fix so the correct guard_time is used ...

guard_time is set in platform data but was never copied
to atmel_lcdfb_info thus a guard_time of 0 have always been used.

This issue was found during code inspection and no know
bugs is fixed by this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: move DMA alloc functions to dma.h ...

This better separates the DMA from the MMU functionality.

Also move all drivers that only depends on asm/mmu.h for the alloc
functions over to the common header.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: change dma_alloc/free_coherent to match other architectures ...

As a lot drivers currently rely on the 1:1 virt->phys mapping on ARM
we define DMA_ADDRESS_BROKEN to mark them. In order to use them on
other architectures with a different mapping they need proper fixing.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: remove address of the Free Software Foundation ...

The FSF address has changed; The FSF site says that
address is

  Free Software Foundation
  51 Franklin Street, Fifth Floor
  Boston, MA 02110-1301
  USA

(see http://www.fsf.org/about/contact/)

Instead of updating it each time the address changes,
just drop it completely treewide.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video: introduce struct display_timings ...

And use it inside struct fb_info. This struct has the advantage
that the supported modes can be passed around in a single pointer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video: add Atmel HLCD support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: factorise common code between lcdc and new hlcdc IP ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>