This function is only used in drivers/usb/*.
It is equivalent to mdelay().

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	drivers/usb/core/Makefile

USB core isn't too strict about allocation/deallocation and
add/remove sequences of usb devices. Especially, error paths
and device tear-down are kind of broken and cause hangs on
failing usb device detect.

This patch improves the situation by introducing a
usb_free_device() that tears down allocated resources by
usb_alloc_new_device(). usb_remove_device() now only deals
with resources that have been added by usb_new_device().
Also, error handling is fixed or improved to ensure that no
devices are unregistered that have not been previously
registered.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Adding a usb device increases dev_index every time a new device is
allocated. Removing a usb device does not decrease again, of course.
As we print the number of detected usb devices after each usb bus
scan based on dev_index, we cannot trust dev_index here. Keep track
of the correct number of (currently) detected usb devices by
introducing an independent dev_count that gets increased on detect
and decreased on remove.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

New usb devices are added to a list of usb devices, but when removing
the corresponding usb_device it was not removed from that list. Fix it
by deleting it properly from the usb_device_list.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This updates the USB Gadget stack to Linux-3.15.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	drivers/usb/core/Makefile

We can now detect changes in the USB device hierarchy properly, so
the 'force' option to the usb command is no longer necessary. We just
scan the busses each time the usb command is called.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Make all USB devices children to the hub device they are
attached to.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Since we have a driver model we can make the hub driver a
real driver model driver. Put it into a new file to separate
the hub from the USB core stuff.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb_new_device tries to find the port number it is attached to
by iterating over the parents children and using the loop counter
index as port number. Instead, just use the portnr field in struct
usb_device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch adds U-Boot 'usb tree' command functionality to barebox.

Here is an example output:

  1 ID 0000:0000
  |  u-boot EHCI Host Controller
  |
  +-2 ID 05e3:0606
    |   USB2.0 Hub
    |
    +-3 ID 10c4:ea60
    |    Silicon Labs CP2102 USB to UART Bridge Contr P-00-00669
    |
    +-4 ID 05e3:0606
    | |   USB2.0 Hub
    | |
    | +-5 ID 05e3:0608
    | | |   USB2.0 Hub
    | | |
    | | +-6 ID 0d8c:000c
    | |       C-Media USB Headphone Set
    | |
    | +-7 ID 0d8c:000c
    |       C-Media USB Headphone Set
    |
    +-8 ID 0846:1040
         NETGEAR NETGEAR FA120 Adapter

The tree view is enabled with 'usb -t'

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Currently we have two conflicting definitions of struct usb_config_descriptor
and struct usb_interface_descriptor in the tree. This is because the USB code
uses additional fields in the structs for internal housekeeping. Add
struct usb_interface and struct struct usb_configuration with the housekeeping
data and embed the corresponding hardware structs into them. This frees the
way to use the definitions from ch9.h in the next step.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This most likely doesn't fix any real bugs, but it's the
right thing to do and reduces the noise level with static
checkers.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

free() already checks the pointer to be non
NULL. No need to do it again.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

So that these messages can be suppressed if necessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To be able to find usb devices in the hardware tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Currently we can only (re)scan all USB hosts. Add a function to
scan individual hosts. This is useful for implementing the detect
callback in the next patch.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

A command should not be interested in the internal USB core state, so
move the state handling into the core.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This renames the USB devices to reflect the bus structure.
The base name for a USB device is usb<devno>. For each child
device we add a -<parent-port-no>. This makes it more easy
to identify devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

iManufacturer = 0
        iProduct = 1
   iSerialNumber = 0
    Manufacturer =
         Product = OHCI Root Hub
    SerialNumber =
        idVendor = 0000
       idProduct = 0000

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	drivers/net/miidev.c
	include/miidev.h

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

In usb_hub_configure the hub is asked for its descriptor and among other things
its bPwrOn2PwrGood time. In the actual hub_power_on function this information
was not used and a hardcoded value was used instead. For some hubs this delay
is to short. So, use the delay the hub wants.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This needs to be dma save.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The device descriptor needs to be dma save.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>