UBI: return ENOSPC if no enough space available ...

UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI error: init_volumes: not enough PEBs, required 706, available 686
UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1)
UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM
UBI error: ubi_init: cannot attach mtd1

If available PEBs are not enough when initializing volumes, return -ENOSPC
directly. If available PEBs are not enough when initializing WL, return
-ENOSPC instead of -ENOMEM.

Cc: stable@vger.kernel.org
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: David Gstir <david@sigma-star.at>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

UBI: add a helper function for updatting on-flash layout volumes ...

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

UBI: extend UBI layer debug/messaging capabilities - cosmetics ...

Some cosmetic fixes to the patch "UBI: Extend UBI layer debug/messaging
capabilities".

Signed-off-by: Tanya Brokhman <tlinder@codeaurora.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

Conflicts:
	drivers/mtd/ubi/build.c
	drivers/mtd/ubi/cdev.c
	drivers/mtd/ubi/io.c
	drivers/mtd/ubi/wl.c

Reworked it for barebox.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

UBI: vtbl: Use ubi_eba_atomic_leb_change() ...

This is more a cosmetic change than a fix.
By using ubi_eba_atomic_leb_change()
we can guarantee that the first VTBL record is always
correct and we don't really need the second one anymore.
But we have to keep the second one to not break anything.

Artem: add a comment

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

UBI: Extend UBI layer debug/messaging capabilities ...

If there is more then one UBI device mounted, there is no way to
distinguish between messages from different UBI devices.
Add device number to all ubi layer message types.

The R/O block driver messages were replaced by pr_* since
ubi_device structure is not used by it.

Amended a bit by Artem.

Signed-off-by: Tanya Brokhman <tlinder@codeaurora.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

Conflicts:
	drivers/mtd/ubi/block.c
	drivers/mtd/ubi/build.c
	drivers/mtd/ubi/cdev.c
	drivers/mtd/ubi/debug.c
	drivers/mtd/ubi/fastmap.c
	drivers/mtd/ubi/io.c
	drivers/mtd/ubi/ubi.h
	drivers/mtd/ubi/vmt.c
	drivers/mtd/ubi/wl.c

Reworked it for barebox.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

UBI: init_volumes: Ignore volumes with no LEBs ...

UBI assumes that ubi_attach_info will only contain ubi_ainf_volume
structures for volumes with at least one LEB.
In scanning mode this is true because UBI can nicely create a ubi_ainf_volume
on demand while creating the EBA table.

For fastmap this is not true, the fastmap on-flash structure has a list of
all volumes, the ubi_ainf_volume structures are created from this list.
So it can happen that an empty volume ends up in init_volumes().

We can easely deal with that by looking into ->leb_count too.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

treewide: remove address of the Free Software Foundation ...

The FSF address has changed; The FSF site says that
address is

  Free Software Foundation
  51 Franklin Street, Fifth Floor
  Boston, MA 02110-1301
  USA

(see http://www.fsf.org/about/contact/)

Instead of updating it each time the address changes,
just drop it completely treewide.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

UBI: reimport UBI from Linux v3.10 ...

This is a fresh UBI import from Linux v3.10

This is done mainly to get fastmap support.

This was tested with the i.MX nand driver, the MXS nand driver and
on CFI NOR flash.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

UBI: remove old ubi support ...

To update to the latest UBI support from the Kernel first remove
the old UBI support. Without it the update will be even less reviewable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add ubi support from u-boot. Just enough to compile and scan ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>