This renames the dcdofs config option in the imx-image tool to ivtofs.  dcdofs
is a misnomer. The DCD (Device Configuration Data) is only one part of the data
linked into the IVT (Image Vector Table), but the meaning of the option is
really the latter, not the former.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This makes the imxcfg files more readable and also makes it possible to
share more assignments between machines that just differ by the used
SoC. (Though I have to admit that in the cases converted here it just
more easily allows to see that the RAM config differs more than probably
necessary.)

This change is intended to have no effect on the built artifacts.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

This adds support for new board variants. Now Supported are:

- i.MX6q module with 1GiB Micron RAM
- i.MX6d/q modules with 1GiB/2GiB Nanya RAM
- i.MX6s modules with 512MiB/1GiB Nanya RAM

This has been tested on:

- i.MX6q module with 1GiB Micron RAM
- i.MX6d module with 2GiB Nanya RAM
- i.MX6s module with 1GiB Nanya RAM

The possible RAM equipment is:

- For the 512MiB module: 2x Nanya nt5cb128m16fp-di
- For the 1GiB modules: 2x Nanya nt5cc256m16cp or 4x Micron MT41K128M16JT-125
- For the 2GiB module: 4x Nanya nt5cc256m16cp

The 512MiB Nanya board is assumed to work with the same DCD table
as the 1GiB Nanya board. The variant is detected by mirroring at
512MiB, but this hasn't been tested by Pengutronix.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This is an i.MX6 based Q7 module, see:

http://www.dfi.com.tw/products/ProductDetails.jsp?productId=1164&mainCategoryId=2&subCategoryId=581

This patch adds basic support for this module.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>