The image format of the i.MX8MP is different from i.MX8M, so add its own
image loading function for it.

Older i.MX SoCs had a IVT Offset (the offset from the start of the image
to the actual data) of 1KiB. This was done to leave space for the
partition table at the beginning of the device. To support GPT SoCs
starting with i.MX8M an additional gap of 32KiB was added, so that the
actual image started at offset 33KiB. Now starting with i.MX8MP the now
superfluous 1KiB offset was removed do that the actual image now starts
at 32KiB.
Unfortunately the 1KiB offset is woven into the offsets of the IVT
whereas the 32KiB are not, which means that we really have to handle
both offsets individually instead of just handling the sum of the
offsets.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx8_esdhc_load_image() and friends can't be used on the big variants of
the i.MX8, so rename to imx8m_esdhc_load_image()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add an option that allows to just load the image into memory, but
return to the calling function instead of directly jumping to the
loaded image.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add a function to load and copy the piggy data to the correct offset
expected by barebox in the RAM. This way the PBL can later verify the
piggydata before uncompressing and loading the main barebox.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Convert imx6_esdhc_start_image() into a generic esdhc_start_image() by
making accept already filled "struct esdhc" as well as use
esdhc_read_blocks().

With that change, create new imx6_esdhc_start_image() whose sole task
is to properly fill a struct esdhc with appropriate offset and to pass
it on to esdhc_start_image().

Both changes are made with a goal of simplifying adding support of new
SoC in mind (see following commits adding support for i.MX8 as example).

NOTE: This commit does not re-implement imx6_esdhc_load_image(),
instead opting for dropping it, due to lack of any users in the
codebase.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Some i.MX53 want to setup the SDRAM from C code rather than
from DCD tables. The image size for these boards is limited
to the internal SRAM size. To overcome this limitation for
i.MX53 boards booting from NAND implement an xload mechanism
to load only the PBL to SRAM and let barebox load the rest
of the image itself after SDRAM has been initialized.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add PBL xload code to load an image from SPI NOR flash. Currently implemented
for i.MX6.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>