ARM: OMAP: Do not show MLO/SPI image options with OMAP_MULTI_BOARDS ...

The MLO/SPI image options have no effect with OMAP_MULTI_BOARDS
enabled, so do not show them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91mux: Fix both help info and Kconfig info. ...

Correct options are, in fact, -p and -b.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc' ...

Conflicts:
	arch/arm/boards/chumby_falconwing/falconwing.c
	arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c
	arch/x86/mach-x86.dox
	scripts/setupmbr/setupmbr.c

Merge branch 'for-next/mips'

Merge branch 'for-next/marvell' ...

Conflicts:
	arch/arm/boards/Makefile
	arch/arm/dts/Makefile

Merge branch 'for-next/imx'

Merge branch 'for-next/dts'

Merge branch 'for-next/doc'

Merge branch 'for-next/clps711x'

Merge branch 'for-next/arm-versatile'

Merge branch 'for-next/arm-errata' ...

Conflicts:
	arch/arm/boards/phytec-phyflex-imx6/lowlevel.c

ARM: i.MX6 Phytec phyFLEX: Add watchdog reset workaround ...

phyFLEX boards beginning with 1362.2 have a workaround for this
i.MX6 bug:

ERR006282 ROM code uses nonreset PFDs to generate clocks, which may
lead to random boot failures

On these boards the SD4_DAT3 pin os connected to the CMIC. The CMIC
will reset the board after 10s when the pin isn't toggled.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: qemu-malta_defconfig: enable PCI & network stuff ...

qemu usage:

  # ifconfig br0:1 172.20.0.1
  # qemu-system-mips -nodefaults -nographic -M malta -m 256 \
    -serial stdio -monitor null \
    -bios ./barebox-flash-image \
    -net nic,vlan=0,model=rtl8139 \
    -net tap,vlan=0,script=net_br0.sh

  ...

  barebox:/ eth0.ipaddr=172.20.0.2
  barebox:/ eth0.serverip=172.20.0.1
  barebox:/ ping 172.20.0.1
  phy0: Link is up - 100/Full
  host 172.20.0.1 is alive
  barebox:/

Sample net_br0.sh (for connecting to br0 interface, so you can
connect barebox to your real network):

  #!/bin/sh

  brctl addif br0 $1
  ifconfig $1 up

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: add PCI support for GT64120-based Malta board ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: add dma_alloc_coherent() ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: imx6: rename hummingboard directory to microsom ...

The rule in barebox is to name the directories after
the modules. As hummingboard is just one of the
carriers for the MicroSOM module, name the directory
accordingly.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: imx6: move imx6_init_lowlevel to single initcall ...

Instead of repeating the same lowlevel init for every board
move it to it's own initcall.

Avoids code bloat and shaves off almost 1.5kB of uncompressed
barebox size for a default imx_v7_defconfig build.

For boards wherethe hostname setup was done in  the postcore
initcall we move this to a device initcall to get it out of
the way.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sdma.h: Typo, "interupt" -> "interrupt" ...

Fix only two "interupt" misspellings in entire barebox codebase.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix misspellings of "persistant" -> "persistent" in various places ...

Fix misspellings of "persistent", including the renaming of a function
to "register_persistant_environment".

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx6: add new chip revisions ...

Add new chip revisions for the new tap-out TO1.5 (i.MX6Q/D) and TO1.2
(i.MX6DL/S)

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: ritmix-rzx50_defconfig: enable gpio stuff ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: dts: jz4755.dtsi: add gpio ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: XBurst: use gpiolib ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx6:phyFLEX: Fix ENTRY_FUNCTION ...

For some phyFLEX-i.MX6 modules the call __barebox_arm_head() was not removed.
With this function the barebox does not start.

Signed-off-by: Christian Hemp <christian.hemp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: add bit manipulation stuff ...

The functions are already in the sandbox, just the #defines are
missing.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: remove doxygen documentation ...

The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: tegra: enable ARM errata workarounds ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: imx6: use imx6 specific cpu init function ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: imx6: add cpu lowlevel init function ...

Enables all relevant errata workarounds for the
i.MX6 SoC.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: add errata workarounds ...

Header only implementation, so they can be pulled
into the individual SoC cpu init functions.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>