LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / dts / imx53-qsb-common.dtsi

2014-04-28	bb7cf71 Browse files » ARM: i.MX53: Use upstream dtsi files ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2014
2014-03-10	78e3db3 Browse files » ARM: mx53-qsrb: enable sata ... tested on i.MX53 START-R : barebox@Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1 imx-sata 10000000.sata: port 0: SATA link ok imx-sata 10000000.sata: port 0: Spinning up device... imx-sata 10000000.sata: port 0: ok. ata0: registered /dev/ata0 Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 7 Mar 2014 Sascha Hauer committed on 10 Mar 2014
2014-03-10	50ed6b4 Browse files » ARM: mx53-qsrb: enable USB host ... - declare the rigth mux for the GPIO used to enable the USB's 5V - enable USB host controller tested on i.MX53 START-R : barebox@Freescale i.MX53 Quick Start-R Board:/ usb -f USB: scanning bus for devices... Bus 001 Device 001: ID 0000:0000 EHCI Host Controller Using index 0 for the new disk Bus 002 Device 003: ID 0951:1654 DT R500 Bus 002 Device 002: ID 0000:0000 EHCI Host Controller 3 USB Device(s) found Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 7 Mar 2014 Sascha Hauer committed on 10 Mar 2014
2014-02-10	9c08524 Browse files » ARM: mx53-qsrb: enable sata ... tested on i.MX53 START-R : barebox@Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1 imx-sata 10000000.sata: port 0: SATA link ok imx-sata 10000000.sata: port 0: Spinning up device... imx-sata 10000000.sata: port 0: ok. ata0: registered /dev/ata0 Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 8 Feb 2014 Sascha Hauer committed on 10 Feb 2014
	c65ac4d Browse files » ARM: mx53-qsrb: enable USB OTG in host mode ... tested on i.MX53 START-R : barebox@Freescale i.MX53 Quick Start-R Board:/ usb -f USB: scanning bus for devices... Using index 0 for the new disk Bus 001 Device 002: ID 0951:1654 DT R500 Bus 001 Device 001: ID 0000:0000 EHCI Host Controller Bus 002 Device 003: ID 0000:0000 EHCI Host Controller 3 USB Device(s) found Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 8 Feb 2014 Sascha Hauer committed on 10 Feb 2014
	9eaee0b Browse files » ARM: mx53-qsrb: enable USB host ... - declare the rigth mux for the GPIO used to enable the USB's 5V - enable USB host controller tested on i.MX53 START-R : barebox@Freescale i.MX53 Quick Start-R Board:/ usb -f USB: scanning bus for devices... Bus 001 Device 001: ID 0000:0000 EHCI Host Controller Using index 0 for the new disk Bus 002 Device 003: ID 0951:1654 DT R500 Bus 002 Device 002: ID 0000:0000 EHCI Host Controller 3 USB Device(s) found Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 8 Feb 2014 Sascha Hauer committed on 10 Feb 2014
2014-01-23	d662a22 Browse files » ARM: i.MX53: dts: move QSB pmic to own file ... There are two versions of the i.MX53 LOCO: - the MCIMX53-START board - the MCIMX53-START-R board The MCIMX53-START-R has a mc34708 pmic and is otherwise the similar to the MCIMX53-START. To prepare for the START-R, move all common nodes to a new imx53-qsb-common.dtsi and remove everything but the board name and pmic from the imx53-qsb.dts. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 10 Jan 2014 Sascha Hauer committed on 23 Jan 2014