LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers / net / Makefile

2014-11-11	c3f5ff5 Browse files » net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller ... This patch introduces the mvneta driver to support the network controller found in Armada 370/XP SoCs. Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ezequiel Garcia authored on 10 Nov 2014 Sascha Hauer committed on 11 Nov 2014
2014-10-08	b64b24d Browse files » net: add rtl8169 driver ... This adds the driver for RealTek 8169 and compatible pci attached network chips. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 4 Oct 2014 Sascha Hauer committed on 8 Oct 2014
2014-07-16	62a123f Browse files » net: Add EFI Simple Network Protocol Driver ... This adds a network driver which uses the EFI Simple Network Protocol to implement networking for barebox. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Jul 2014
2014-07-04	874b8ac Browse files » Merge branch 'for-next/net' Sascha Hauer committed on 4 Jul 2014
2014-07-04	a7c925b Browse files » net: add RealTek RTL-8139 PCI Ethernet driver ... This driver is based on Linux 2.6.39 8139too driver. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 3 Jul 2014 Sascha Hauer committed on 4 Jul 2014
2014-07-02	97bd040 Browse files » net: add ENC28J60 support ... ENC28J60 is a stand-alone Ethernet controller with SPI Interface and integrated 10BASE-T PHY. This driver was ported from linux-3.15. The most notable barebox driver version changes: * add device tree support; * drop netif_msg_() debug level checking; use IF_ENABLED for checking CONFIG_ENC28J60_WRITEVERIFY; * add mii_bus support. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 1 Jul 2014 Sascha Hauer committed on 2 Jul 2014
2014-04-29	2766fbb Browse files » net: add ARC EMAC driver ... This patch adds support for the Synopsys 10/100 Mbps Ethernet MAC used on some ARC devices and on Rockchip SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014
2014-02-10	1cae0ff Browse files » net: orion: add ethernet driver ... This adds a driver for the Ethernet ip found on Marvell Orion SoCs, which is derived from Marvell Discovery System Controllers (MV643xx). It is partially based on the corresponding u-boot driver. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 5 Feb 2014 Sascha Hauer committed on 10 Feb 2014
2014-02-10	7ccd47f Browse files » net: reorder Kconfig and Makefile alphabetically ... This reorders Kconfig and Makefile for drivers/net alphabetically. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 5 Feb 2014 Sascha Hauer committed on 10 Feb 2014
2013-12-17	497c01f Browse files » net: add driver for OpenCores 10/100 Mbps ethernet MAC ... This patch introduces a driver for the OpenCores 10/100 Mbps ethernet MAC core, ported from Linux kernel with small changes. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 15 Dec 2013 Sascha Hauer committed on 17 Dec 2013
2013-05-31	7d27f0d Browse files » net: add ar231x-eth support ... This driver should work with some Atheros WiSoCs: - ar2312, ar2313 - ar2315, ar2316 ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 30 May 2013 Sascha Hauer committed on 31 May 2013
2013-02-14	59cfe59 Browse files » highbank: add xgmac support ... Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 13 Feb 2013 Sascha Hauer committed on 14 Feb 2013
2013-01-10	5824325 Browse files » drivers: net: add driver for TI CPSW ... Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 13 Dec 2012 Sascha Hauer committed on 10 Jan 2013
2012-10-03	8338984 Browse files » Merge branch 'for-next/net' Sascha Hauer committed on 3 Oct 2012
2012-09-25	2263e27 Browse files » net: introduce phylib ... Adapt phylib from linux switch all the driver to it reimplement mii bus This will allow to have - phy drivers - to only connect the phy at then opening of the device - if the phy is not ready or not up fail on open Same behaviour as in linux and will allow to share code and simplify porting. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD authored on 9 Aug 2012 Sascha Hauer committed on 25 Sep 2012
2012-09-17	13e657f Browse files » drivers/net: add driver for the EMAC device found in some TI SoCs ... Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 6 Sep 2012 Sascha Hauer committed on 17 Sep 2012
2012-09-14	d836d76 Browse files » drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch ... It starts the switch and provides basic access to the registers. This driver could also work with some other Micrel switches, possibly with some small changes. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 5 Sep 2012 Sascha Hauer committed on 14 Sep 2012
2012-08-10	caf788a Browse files » net: GIANFAR driver ... This update adds the GIANFAR driver along with the configuration and build files. Signed-off-by: Renaud Barbier <renaud.barbier@ge.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Renaud Barbier authored on 7 Aug 2012 Sascha Hauer committed on 10 Aug 2012
2012-06-26	54edd7c Browse files » drivers/net: add designware driver ... Straight forward port of Synopsys Designware ethernet driver from u-boot v2012.04.01. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Johannes Stezenbach authored on 25 Jun 2012 Sascha Hauer committed on 26 Jun 2012
2012-03-13	4088ab5 Browse files » NET: Add support for ks8851_mll ... Add support for KS8851 16bit MLL chip from Micrel Inc. Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 9 Mar 2012 Sascha Hauer committed on 13 Mar 2012
2011-12-14	c258068 Browse files » Remove the obsolet driver for the DM9000E ethernet device ... Support for the old DM9000E device is now part of the new dm9k.c driver. So, remove the old driver source and switch all users to the new driver. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 12 Dec 2011 Sascha Hauer committed on 14 Dec 2011
2011-12-14	7989c23 Browse files » Add support for more recent Davicom DM9k devices ... This patch adds support for the more recent DM9000A and DM9000B types, and keeps support for the older DM9000E device. As this patch is more or less a complete re-wrote of the existing driver I add a new source file instead of fixing the existing one. In a later patch the old driver will be removed. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 12 Dec 2011 Sascha Hauer committed on 14 Dec 2011
2011-05-02	3260e9e Browse files » Nios2: Add Altera TSE driver ... Add Altera Triple Speed Ethernet driver Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck JULLIEN authored on 11 Apr 2011 Sascha Hauer committed on 2 May 2011
2011-05-02	554d967 Browse files » Fix coding style in driver/net/Makefile ... Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck JULLIEN authored on 11 Apr 2011 Sascha Hauer committed on 2 May 2011
2010-08-27	12f396a Browse files » net: rework the mii support ... this rework is done in order to add a phylib and allow to have phy driver support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 26 Aug 2010 Sascha Hauer committed on 27 Aug 2010
2010-01-14	6f4ed95 Browse files » Add EP93xx ethernet driver ... Added ethernet driver for EP93xx SoCs Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 12 Jan 2010 Sascha Hauer committed on 14 Jan 2010
2009-07-01	bf96799 Browse files » Adding the network driver for the SMSC91C111 ethernet device. ... Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Juergen Beisert committed on 1 Jul 2009
2009-04-07	277b605 Browse files » USB support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 7 Apr 2009
2009-03-31	5a2e321 Browse files » i.MX FEC Kconfig: add a ARCH_HAS_FEC_IMX symbol ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Mar 2009
2009-03-19	2703e60 Browse files » fec imx27: rename to fec_imx ... This driver is not only used on i.MX27 but on i.MX35 and i.MX25, so rename it to a more generic name Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Mar 2009