LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / mips / Makefile

2015-01-08	d6d28ac Browse files » kbuild: move asm-offsets.h rule to ./Kbuild ... Currently, MIPS is the only architecture that needs include/generated/asm-offsets.h, but we have got ./Kbuild file now. It is a good reason to move asm-offsets.h rule from arch/mips/Makefile to ./Kbuild and add dummy asm-offsets.c for the other architectures. asm-offsets.h would be useful for all the architectures. This commit does not implement include/generated/bounds.h, but if necessary, it is easy to implement it. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masahiro Yamada authored on 23 Dec 2014 Sascha Hauer committed on 8 Jan 2015
2014-09-11	8d9d50f Browse files » MIPS: add MIPS Creator CI20 board support ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 10 Sep 2014 Sascha Hauer committed on 11 Sep 2014
2014-06-11	40a1897 Browse files » mips: Fix dtb build rules ... Add intermediate .S files to .SECONDARY. Otherwise make deletes them and regenerates them each build. Also remove KBUILD_DTBS since the make system descends in dts/ anyway. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Jun 2014
2014-03-28	6839863 Browse files » MIPS: ath79: add tplink-mr3020 board support ... This board support code can be used for TP-LINK WR703 too. TP-LINK WR703 is very similar to TP-LINK MR3020, there are some non-essential differences: * WR703 is smaller and cheaper; * WR703 has only one led, but MR3020 has five leds; * MR3020 uses mini-USB connector, WR703 uses micro-USB connector. See https://forum.openwrt.org/viewtopic.php?id=45159 for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 27 Mar 2014 Sascha Hauer committed on 28 Mar 2014
2014-03-28	c1ef9f8 Browse files » MIPS: add Atheros ar933x family support ... Use the mach-ath79 name for compatibility with linux kernel. Signed-off-by: Du Huanpeng <u74147@gmail.com> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Du Huanpeng authored on 27 Mar 2014 Sascha Hauer committed on 28 Mar 2014
2014-03-26	638998c Browse files » MIPS: boards: rename rzx50 -> ritmix-rzx50 ... All MIPS board use <vendor>-<model> name template save Ritmix RZX-50. This commit fixes this inconsistency. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 25 Mar 2014 Sascha Hauer committed on 26 Mar 2014
2014-01-30	0208fdb Browse files » MIPS: mach-loongson: add loongson-ls1b board ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 18 Jan 2014 Sascha Hauer committed on 30 Jan 2014
2014-01-21	2118632 Browse files » MIPS: add Loongson-1B CPU Kbuild stuff ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 18 Jan 2014 Sascha Hauer committed on 21 Jan 2014
2014-01-21	a352806 Browse files » MIPS: add initial Loongson-based boards support ... Loongson (simplified Chinese: 龙芯; pinyin: Lóngxīn; literally: "Dragon Core") is a family of general-purpose MIPS CPUs developed at the Institute of Computing Technology (ICT), Chinese Academy of Sciences (CAS) in the People's Republic of China. See http://en.wikipedia.org/wiki/Loongson for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 18 Jan 2014 Sascha Hauer committed on 21 Jan 2014
2013-12-04	ddac4f3 Browse files » MIPS: add asm-offsets.h generation ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
2013-05-31	b993cc4 Browse files » MIPS: ar231x: add netgear-wg102 ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 30 May 2013 Sascha Hauer committed on 31 May 2013
2013-05-31	59fe549 Browse files » MIPS: add Atheros ar531x family support ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 30 May 2013 Sascha Hauer committed on 31 May 2013
2013-05-13	6fe6d9f Browse files » MIPS: add initial device tree support ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 12 May 2013 Sascha Hauer committed on 13 May 2013
2012-12-14	f369f64 Browse files » MIPS: add pre-bootloader (pbl) image support ... This patch is based on ARM pbl support and allows creating a pre-bootloader binary for compressed image. For different MIPS SoCs (or even for different boards based on the same SoC) the operations carried on in start-pbl.S can be very different. The additional constraints can be imposed on the size of the boot code or the special magic labels in the beginning of the boot code; In some cases it could be necessary to show CPU is alive as early as possible (transmit a char via UART or blink a LED). So the demands for pbl start operation can be very different. E.g. malta board store boot code at the NOR flash mapped to the MIPS power-on address (0xbfc00000); it is the most simple case: we need just copy pbl image from direct-mapped flash to RAM and jump there. The XBurst-powered boards store boot code in the beginning of a NAND flash or in the beginning of SD/MMC card. In this case we must use simple and short NAND or SD/MMC access routines to copy pbl image to RAM. To meet so different demands a simple technique is selected: * MIPS pbl entry point located in file arch/mips/boot/start-pbl.S. * MIPS pbl code (see start-pbl.S) assumes that every pbl-enabled board has a arch/mips/boards/<BOARD>/include/board/board_pbl_start.h header file. This file must contain definition of the board_pbl_start macro. This macro is used as start of pbl image; * the most popular asm routines (stack setup, relocation to link address, NS16550 initialization (WIP) and so on) are containt in the arch/mips/include/asm/pbl_macros.h header file. So board pbl macro can use it if necessary. It is possible to create similar headers with macros for each specific SoC; so even if we have many different boards based on the same SoC the board_pbl_start macro for every board can be short and clear. * after board-specific initialization the stack pointer is initialized and pbl C code is started. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 12 Dec 2012 Sascha Hauer committed on 14 Dec 2012
2012-12-03	a620f2b Browse files » MIPS: fix out-of-tree build ... The commit commit `d25d94b` Author: Antony Pavlov <antonynpavlov@gmail.com> Date: Fri Jun 1 13:23:20 2012 +0400 MIPS: make possible board-specific header files This patch makes possible to put a board-specific header file (e. g. foobar.h) to arch/mips/boards/*/include/board/. breaks the out-of-tree build for the boards that use it (rzx50). Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 29 Nov 2012 Sascha Hauer committed on 3 Dec 2012
2012-08-12	b615445 Browse files » Makefile: generate a barebox-flash-image link ... Depending on the SoC a barebox.bin, barebox.netx, barebox.s5p, MLO image is generated. With pbl support there now is an additional arch/arm/pbl/zbarebox.bin image. To help the user to determine which image should be flashed to his device, generate a barebox-flash-image link. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Sascha Hauer committed on 12 Aug 2012
2012-06-05	d25d94b Browse files » MIPS: make possible board-specific header files ... This patch makes possible to put a board-specific header file (e. g. foobar.h) to arch/mips/boards/*/include/board/. Header file usage: #include <board/foobar.h> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 1 Jun 2012 Sascha Hauer committed on 5 Jun 2012
2012-05-17	1cbe2b2 Browse files » MIPS: XBurst: add Ritmix RZX-50 board support ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 16 May 2012 Sascha Hauer committed on 17 May 2012
2012-05-17	3f02285 Browse files » MIPS: add XBurst processor family support ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 16 May 2012 Sascha Hauer committed on 17 May 2012
2011-08-05	ccaeb1a Browse files » MIPS: add initial D-Link DIR-320 wireless router support ... Can be started from CFE using tftp, e.g.: CFE> ifconfig eth0 -addr=192.168.0.99 CFE> boot -tftp -addr=a0800000 -raw 192.168.0.1:barebox.bin Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 Aug 2011 Sascha Hauer committed on 5 Aug 2011
	d507792 Browse files » MIPS: add initial BCM47xx-based boards support ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 Aug 2011 Sascha Hauer committed on 5 Aug 2011
	b12f817 Browse files » MIPS: add qemu malta board support to barebox ... The only supported peripheral is ns16550 serial port. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 Aug 2011 Sascha Hauer committed on 5 Aug 2011
	de754b6 Browse files » MIPS: add Malta machine support to barebox ... The machine uses only big-endian mode. Only supported peripheral is serial port. The machine supports only MIPS32 CPUs. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 Aug 2011 Sascha Hauer committed on 5 Aug 2011
	d3f6627 Browse files » MIPS: add common MIPS stuff ... Add start.S, CP0 clocksource, Makefile, linker script and memory layout function. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 Aug 2011 Sascha Hauer committed on 5 Aug 2011