clk: of: fix clk_of_table generation ...

We used to collect all sections beginning with __clk_of_table_ in a single
section in the linker using KEEP(*(.__clk_of_table_*)). That the sentinel
entry ended up as the last entry was pure luck, but not always the case.

Instead of putting all entries in different sections we now put all entries
in the same section. Only the sentinel entry gets its own section and is
collected by the linker separately.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Andreas Willig <andreas.willig@rafi.de>
Tested-by:  Andreas Willig <andreas.willig@rafi.de>

startup: introduce postenvironment_initcall ...

To allow init code that depends on the environment being loaded.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

crypto: hmac: move register to hmac ...

As we will use the best sha algo at runtime

Add a new init level crypto_initcall to ensure that all the sha present
before hmac

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for metadata in barebox images ...

It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:

- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property

Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.

Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.

There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.

For device tree boards the model and of_compatible tags are automatically
generated.

Example output of the imd tool for a Phytec phyFLEX image:

build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Load PBL into SRAM ...

This allows to load all the lowlevel init code, including the
uncompressor, inside SRAM and not just the bare init part. This is
useful when pbl is used as a first-stage bootloader but is loaded by an
external firmware.

Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

asm-generic: add macro for BAREBOX_CLK_TABLE ...

This adds a macro for linker scripts to place DT clock provider table.
While at it, also add ALIGN(8) to DTB macro and fix a whitespace issue.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/zynq' ...

Conflicts:
	arch/arm/Makefile

ARM: zynq: Add new architecture zynq ...

Add basic support for the Xilinx Zynq-7000 EPP architecture.
The Zynq-7000 is an embedded processing platform that combines a Cortex A9
dualcore MPSoC with an Artix-7 FPGA.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Makefile.lib: Add dtc support ...

Add rules to generate dtb files from dts/dtsi files,
optionally run the source files through the preprocessor.
Also add a rule to generate object files to include in
the barbox binary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM ep93xx: Get rid of special handling in linker file ...

The ep93xx needs a special value at offset 0x1000. Rather than
do special handling in the linker file add aa header section
as done on i.MX.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: add initial i.MX6 support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

introduce barebox_bare_init_size to known the bare_init size and check it ...

this allow to check we do not exceed the size of the SRAM as example

introduce BAREBOX_MAX_BARE_INIT_SIZE the maximum size of bare_init
this will allow your bare_init will fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add magicvar command ...

The magicvar command gives an overview about all environment variables
with a special meaning.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

init: introduce mem, mmu and postmmu initcall ...

on ARM we need to init all the memory before the mmu and before any drivers
use dma_alloc_coherent

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

ARM: add support for the i.MX53 ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

x86: Use the generic linker script initializing ...

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>

ARM i.MX: Add basic i.MX51 support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

initcall: add postconsole_initcall ...

this will allow us to print information as soon as the console will be enable

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rename U-Boot-v2 project to barebox ...

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>