smc91111: switch to resources ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

smc91111: Various sparse fixes. ...

Patch fix all similar warnings found by sparse:
drivers/net/smc91111.c:488:9:
warning: incorrect type in argument 1 (different base types)
	expected void const volatile [noderef] <asn:2>*<noident>
	got unsigned long [unsigned] offset

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: rework the mii support ...

this rework is done in order to add a phylib and allow to have phy driver support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

network drivers: call net_receive directly instead of NetReceive ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

smc91111: fix odering of mac address read from EEPROM ...

On my little endian PXA270, the ethernet address is byte swapped:

correct ethernet address: 00:50:c2:80:a7:bd
broken  ethernet address: 50:00:80:c2:bd:a7

The correct value is what the sticker on the baoard and the linux driver
says. This patch fixes the problem by reading the ethaddr byte-wise from
the eeprom.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rename U-Boot-v2 project to barebox ...

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

cdev fixes for new boards ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

smc91111: use miiphy functions for autonegotiation ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Adding the network driver for the SMSC91C111 ethernet device. ...

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>

remove unported includes and drivers

svn_rev_095 ...

Currently U-Boot uses globally defined eth_* functions. This is
horribly unflexible. This patch replaces the global functions
with pointers from structs. We could also use CONFIG_NET_MULTI,
but this has other implications, though we should merge this
some day.
Also, U-Boot has no unique way to handle MAC addresses. Each and
every board and network driver uses it's own mechanism to set the
MAC address. There are several problems which I've for too often.
For example everything goes well if we boot from network, but when
we boot from flash U-Boot forgets to set the MAC address and the
linux network driver has none.
This patch adds [gs]et_mac_address to the eth_device struct and
handles it as follows:
- First try to get a valid MAC address from the EEPROM and set
  'ethaddr' accordingly.
- If no valid MAC address is found in the EEPROM (or no EEPROM is
  connected), we set the devices MAC address from 'ethaddr'
This is done in eth_initialize which is called on startup for
every board.

svn_rev_057 ...

move all ethernet drivers to drivers/net