gpio: fix null pointer exception when there is no oftree ...

In a system with oftree support enabled but with no oftree the
of_gpiochip_scan_hogs() would fail due to device_node equals NULL.

Check device_node and return with 0 in this situation, as this
mirrors what would have happened before we added support for gpio-hogs.

Use IS_ENABLED(CONFIG_OFDEVICE) to teach compiler to leave
out the of_* specific functions if not needed.

Fixes: 37e6bee7 ("gpiolib: Add support for GPIO "hog" nodes")
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

gpiolib: Add support for GPIO "hog" nodes ...

Add code to support 'gpio-hog' nodes used in some .dts files in Linux
kernel.

Cc: cphealy@gmail.com
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: Add code to support "active low" GPIOs ...

So far this particular aspect of various DT-bindings has been handled
on a per-driver basis. With this change, hopefully, we'll have a
single place to handle necessary logic inversions and eventually
would be able to migrate existing users as well as avoiding adding
redundant code to new drivers.

Cc: cphealy@gmail.com
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: Return -EPROBE_DEFER on gpio_get_num() ...

GPIO drivers can be registered quite late in registration process
causing dependant devices to fail probing. If we know gpio_get_num
will be called with a non-NULL device, return -EPROBE_DEFER instead
of -ENODEV to allow re-probing later.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: rename "gpiolib" -> "gpioinfo" ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: gpiolib command: show label only for requested pins ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: gpio_free: clear gpio's "label" field too ...

If an error occured during gpio_request_array() then we can
get not requested gpio with nonempty garbage "label" field
value. Afterward the "gpiolib" command can try to use this
nonempty garbage value.

This patch prevents this error situation.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: gpio_request(): print message on error ...

Just copy gpiod_request() function logic from linux-v3.13-rc7.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: import gpio_request_array() from linux 3.7 ...

Also import related functions gpio_request_one() and
gpio_free_array().

This commit imports code from linux 3.7 as
the more recent linux kernel versions use gpiolib descriptors,
see this commit for details:

  commit 372e722
  Author: Alexandre Courbot <acourbot@nvidia.com>
  Date:   Sun Feb 3 01:29:29 2013 +0900

      gpiolib: use descriptors internally

      Make sure gpiolib works internally with descriptors and (chip, offset)
      pairs instead of using the global integer namespace. This prepares the
      ground for the removal of the global gpio_desc[] array and the
      introduction of the descriptor-based GPIO API.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: unify gpio direction macros names with Linux kernel ...

See linux.git/include/linux/gpio.h and
linux.git/Documentation/gpio.txt for details.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: make gpiolib command more verbose ...

This adds some more printf information to gpiolib command, like the
gpiochip handling a specific gpio. Also, current direction and value
of the gpio are printed, if the gpiochip provides the corresponding
callbacks.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

GPIO: Add gpio_to_desc helper ...

Patch adds gpio_to_desc helper for validate GPIO.
A bit optimization is performed (about -160 bytes on ARM).

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

GPIO: Rename "drivers/gpio.c" to "drivers/gpiolib.c" ...

Rename "drivers/gpio.c" to "drivers/gpiolib.c".
Reason is for understand functionality of driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>