LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / mach-at91 / at91sam9x5_devices.c

2020-07-11	a84a4e0 Browse files » ARM: at91: replace at91sam9_ddrsdr.h with at91bootstrap's at91_ddrsdrc.h ... Instead of adding missing definitions to the existing at91sam9_ddrsdr.h and adapting the incoming DDRAM initialization code from at91bootstrap, just replace the lightly used existing header with: https://github.com/linux4sam/at91bootstrap/blob/v3.8.12/include/arch/at91_ddrsdrc.h For easier comprehension, the replacement is done in three steps: This last step copies the memory size querying functions from at91sam9_ddrsdr.h to at91_ddrsdrc.h, then deletes it and fixes all references. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 1 Jul 2020 Sascha Hauer committed on 11 Jul 2020
2018-11-06	393bba8 Browse files » ARM: at91: remove mach/io.h ... Remove at91_sys_read() and at91_sys_write() since these are no longer used. This makes mach/io.h empty so remove that aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
2018-11-06	c67ac51 Browse files » ARM: at91: Use SoC specific base addresses where appropriate ... Replace AT91_ base addresses with their SoC specific variants where possible. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
2018-11-05	eaa7fcf Browse files » ARM: at91: Add SoC namespace to matrix defines ... Add SoC namespace to matrix define so we have one source less of conflicting defines. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
2017-02-14	31e16d1 Browse files » at91: serial: pullup RX pins, do not pullup TX pins ... We have a number of sama5d3 devices that sometimes hangs at the barebox prompt during boot due to floating RX pins. This patch fixes the problem for us (and probably others). It is similar in nature to linux kernel commit 138c2b2f175b ("ARM: dts: at91: fixes dbgu pinctrl, set pullup on rx, clear pullup on tx") While at it, remove pointless waste of power that the pullup of the TX pins causes and fix the signal comments for SAMA5D4. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Peter Rosin authored on 13 Feb 2017 Sascha Hauer committed on 14 Feb 2017
2015-01-08	d875357 Browse files » sizes.h: move include/sizes.h to include/linux/sizes.h ... This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' \| xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masahiro Yamada authored on 8 Jan 2015 Sascha Hauer committed on 8 Jan 2015
2013-11-08	d5929e6 Browse files » ARM: remove asm/hardware.h ... asm/hardware.h does not have any content except including mach/hardware.h. include mach/hardware.h directly where needed and get rid of asm/hardware.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2013
2013-08-16	8c349b5 Browse files » ARM: AT91: move iomux definitions to iomux.h ... mach/gpio.h is for the gpio API, so move unrelated stuff away. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Aug 2013
2013-08-16	1081856 Browse files » ARM: include <gpio.h> instead of <mach/gpio.h> ... The gpio api should be used from <gpio.h> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Aug 2013
2013-04-03	28acd83 Browse files » macb: rename platform data ... The macb/gem core is used by the Zynq SoC. In preparation of sharing the macb driver between at91 and Zynq, rename the platform data to 'struct macb_platform_data', and move the definition to a common location. Signed-off-by: Josh Cartwright <joshc@eso.teric.us> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Josh Cartwright authored on 15 Mar 2013 Sascha Hauer committed on 3 Apr 2013
2013-01-31	b43287e Browse files » at91sam9x5: add lcd support ... the sam9x5 have multiple overlay but only register the base one Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 31 Jan 2013 Sascha Hauer committed on 31 Jan 2013
2013-01-29	f7e3126 Browse files » macb: allow to pass the phy interface ... as we will add later the GMAC IP verion support (GEM) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 28 Jan 2013 Sascha Hauer committed on 29 Jan 2013
2013-01-27	11bae6b Browse files » at91sam9x5: add autodetect sd/ddram size ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 27 Jan 2013 Sascha Hauer committed on 27 Jan 2013
2013-01-23	dfbb16a Browse files » at91sam9x5: add ehci support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 21 Jan 2013 Sascha Hauer committed on 23 Jan 2013
2013-01-23	b01ded9 Browse files » at91: usb: allow to specicfy inverted vbus ... add missing vbus to all SoC Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 21 Jan 2013 Sascha Hauer committed on 23 Jan 2013
2012-12-22	8ad5725 Browse files » at91: use gpio_is_valid to check gpio ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 20 Dec 2012 Sascha Hauer committed on 22 Dec 2012
2012-11-19	c811546 Browse files » macb/ether: split flags for drivers and phylib ... as in the kernel use is_rmii flags for pinctrl phy_flags for phylib flags Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 16 Nov 2012 Sascha Hauer committed on 19 Nov 2012
2012-11-16	9749c2f Browse files » Merge branch 'for-next/mtd' ... Conflicts: arch/arm/configs/at91sam9x5ek_defconfig Sascha Hauer committed on 16 Nov 2012
2012-11-15	ca2d9c5 Browse files » at91sam9x5: add mci support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Nov 2012 Sascha Hauer committed on 15 Nov 2012
	d7a4aca Browse files » at91sam9x5: add spi support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Nov 2012 Sascha Hauer committed on 15 Nov 2012
	28caf41 Browse files » at91sam9x5: add i2c support ... use i2c-gpio until we add the hw drivers Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 1 Nov 2012 Sascha Hauer committed on 15 Nov 2012
2012-10-21	9af8dcc Browse files » at91sam9x5: add pmecc support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 17 Oct 2012 Sascha Hauer committed on 21 Oct 2012
2012-07-01	5f03074 Browse files » resource: store 'end' instead of 'size' in struct resource ... Storing the size instead of the resource end in struct resource was a mistake. 'size' ranges from 0 to UINT[32\|64]_MAX + 1 which obviously leads to problems. 'end' on the other hand will never exceed UINT[32\|64]_MAX. Also this way we can express a iomem region covering the whole address space. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Jul 2012
2012-05-29	d720836 Browse files » at91: switch uart registration to inline ... this allow to save between 100 to 300 bytes Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 May 2012 Sascha Hauer committed on 29 May 2012
2012-04-16	abe4560 Browse files » Use DEVICE_ID_DYNAMIC where applicable ... We now have DEVICE_ID_DYNAMIC for dynamic allocation of device ids, Use it where applicable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Apr 2012
2012-04-02	c21492c Browse files » AT91: at91sam9x5: add chip and board file ... Fow now use Soft ECC for nand util we add the PMECC. On-chip and board related peripherals definitions. Basic implementation for VB board. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 30 Mar 2012 Sascha Hauer committed on 2 Apr 2012