macb: add support for board specific get_ethaddr function ...

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: rework the mii support ...

this rework is done in order to add a phylib and allow to have phy driver support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: implement clock framework ...

this implementation is based on linux one (v2.6.35-rc5-76-gd0c6f62)
it will calculate all the clock dynamically instead of statictly
this will use also the new clock framework

it will also print the clock status after the console init

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

network drivers: call net_receive directly instead of NetReceive ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rename U-Boot-v2 project to barebox ...

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91: add cpu devices common api ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91sam9: move to at91 ...

this will allow to add at91rm9200 with the same api as done in the kernel

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

add a device_d to ethernet devices ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Get rid of DEVICE_TYPE_ETHER usage ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

[mac] add force link support ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

[macb] clear RMII bit when using plain MII ...

When operating in plain MII mode, the driver assumes the RMII bit not
set. Although this is the power on reset value, clearing this bit helps
when playing with different network setups.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

[macb] use phy_addr supplied by platform data ...

The driver was not using the phy address supplied by the platform
data. With this patch the miiphy.address is set phy addr supplied
by the mac platform data.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

macb eth driver: remove barrier() definition ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam ether: Make more configurable via platform_data ...

Pass RMII and phy address via platform data rather than hardcoded.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add macb ethernet driver