docs: Add/Update state documentation ...

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: user manual: include documentation for remote-control ...

This documentation snippet was already added to the tree, but not
included anywhere.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: add some info about the reset variants ...

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: add some info about the reset reason framework ...

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for metadata in barebox images ...

It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:

- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property

Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.

Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.

There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.

For device tree boards the model and of_compatible tags are automatically
generated.

Example output of the imd tool for a Phytec phyFLEX image:

build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

doc: move variables near device parameters ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

doc: start (almost) all headlines with a capital ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

doc: make "System setup" an appendix ...

Note that I used "Appendix: " as text, because it looks like
python-sphinx doesn't know about appendices.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: Add new sphinxs docs ...

This is a rewrite of the Documentation in reStructuredText format using
Sphinx as build system, see http://sphinx-doc.org/.

The documentation is built into static html pages with 'make docs'.
The pages can be found under Documentation/html after building.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>