LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / mach-imx / clk-imx27.c

2014-09-16	ed6e965 Browse files » resource: Let dev_request_mem_region return an error pointer ... For all users fix or add the error check. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Sep 2014
2014-02-10	0d70fb4 Browse files » video: imx: Add a name to perclk ... perclk should be named 'per' to make sure we get the correct clock. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Feb 2014
2014-01-23	084a994 Browse files » ARM: i.MX27: Add missing MPLL clock sources ... The MPLL can be driven from the low frequency reference clock. This is the reset default. Currently the clock code assumes this has been changed from the lowlevel code. If that didn't happen we get wrong clock rates. This adds the missing clocks so that we get correct clock rates. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Jan 2014
2013-06-18	2260389 Browse files » ARM: i.MX: Make timer available earlier ... This moves the CCM drivers to core_initcall since this has no dependencies. This way we can be sure that the clock for the clocksource is available in at postcore_initcall time. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Jun 2013
2013-01-17	39390ee Browse files » i.MX27: fix shift amount for PCCR1_PERCLK3_EN ... Signed-off-by: Daniel Mierswa <d.mierswa@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Mierswa authored on 17 Jan 2013 Sascha Hauer committed on 17 Jan 2013
2013-01-17	0f7bff8 Browse files » i.MX21/27: don't enable lcd bus clocks too early ... On the MX27 based board phycard-i.MX27 the display won't properly come up. Before removing imx-regs.h and the code that sets the register in the i.MX video driver, the PCCR registers were set _after_ the screen start (LSSAR) was set. This restores that old behaviour and makes the display come up properly again. I did not have a chance to test this on any other i.MX27 or i.MX21 hardware though I assume that the "old" order is required there too. Signed-off-by: Daniel Mierswa <d.mierswa@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Mierswa authored on 17 Jan 2013 Sascha Hauer committed on 17 Jan 2013
2012-10-17	86d9ed1 Browse files » ARM i.MX27: move PCCR gate registers to its only user ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Oct 2012
	aaad5cb Browse files » Merge branch 'for-next/clk' into for-next/imx ... Conflicts: drivers/net/fec_imx.c Sascha Hauer committed on 17 Oct 2012
	09efce4 Browse files » Merge branch 'for-next/imx-work' into for-next/imx ... Conflicts: arch/arm/mach-imx/imx1.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Oct 2012
2012-10-10	c1cc2c2 Browse files » ARM i.MX27: Add lcdc per gate ... This gate is used to enable/disable the lcd controller, hence we need a gate for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Oct 2012
2012-10-05	5003e4d Browse files » ARM i.MX: streamline imx_silicon_revision ... All i.MX SoCs now use the same imx_silicon_revision() function to get the revision. Add a separate header file for it and a common function used on all SoCs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Oct 2012
	4008d0a Browse files » ARM i.MX27: Use standard IMX_CHIP_REV_* defines ... We have IMX_CHIP_REV_* defines which are used for most i.MX SoCs. Use them for i.MX27 aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Oct 2012
	aa64d57 Browse files » ARM i.MX: Add devicetree support to the ccm drivers ... This adds the compatible strings to the CCM drivers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Oct 2012
2012-10-04	94de405 Browse files » Merge branch 'for-next/imx-clk' Sascha Hauer committed on 4 Oct 2012
2012-10-04	c422abc Browse files » ARM i.MX27: implement clk support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Oct 2012