net: cpsw: unregister device on remove callback ...

The CPSW uses DMA, so we should quiesce the device before leaving
barebox. This patch unregisters the CPSW properly on the device
remove callback. To do this we have to fix the error path in
cpsw_slave_setup, since this function can fail and we need a
known slave status in the remove function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: prevent stray cache writeback ...

The cache should be invalidated when transfering ownership of a buffer
to the device. Otherwise the writeback of dirty cache lines can
corrupt the hardware written data.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: ignore error on slave setup ...

The CPSW has two slaves. When one of them fails to setup continue
anyway with the other one. This fixes a crash in the beaglebone black
which only has one slave connected. The code doesn't find a phy on
the second slave and bails out, but the error path is broken: It frees
the private data structures which contains used resources.

Reported-by: Philippe Leduc <ledphilippe@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

net: cpsw: Set phy device_node pointer in probe ...

Set the phy device_node pointer to the equivalent cpsw slave node.
We need this, because phy drivers using this pointer for their configuration.

Create and register the phy device in cpsw_probe(), so that this phy device
can be found later by phy_device_connect() in cpsw_open().

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Fix probe for one port ethernet ...

If only one port is pinned out, probe fails
as the second port phy_id is not found.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Allow gigabit connection ...

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Allow multiple slaves ...

The driver is ready now for handling both slaved, so add support
for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Always write mac_control register ...

Instead of keeping track of the mac_control register value and
only writing to it when it changed just always write it. This is
more safe anyway since the mac_control register content is altered
in the soft_reset functions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: use slave device for dev_dbg ...

Since the cpsw has two slaves which handle one network interface
each the slave number is interesting during debugging. use the
slave device for dev_dbg.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: register slaves as devices ...

This makes it possible to directly call dev_dbg and friends
on the slave. Also the ethernet aliases in the devicetree
now match the devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Pass correct slave ...

Pass the current slave to cpsw_slave_init/cpsw_update_link,
not the first one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Pass eth_device to net_receive ...

So that barebox has the information which interface a packet
came from.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net cpsw: fix rx stability under heavy network load ...

RX DMA Head Descriptor Pointer can get 0 when there is a lot of traffic,
which results in a timeout error. A good way to provoke this error is by
sending lots of ARP requests. This patch makes sure that the RX DMA Head
Descriptor Pointer is set.

The origin driver, from which this is derived, already contains this fix.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Fix gmii_sel config ...

Prober slave_num is needed by cpsw_gmii_sel_am335x to calc reg value.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: straighten error path ...

This mainly has the effect of checking the return value of eth_register.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: attach slave to edev->priv ...

An ethernet device belongs to a slave, so set edev->priv to the slave
and not to the cpsw.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: drop for_each_slave ...

We currently only use one slave, so drop for_each_slave and hardcode
slave[0] until we pass the proper context to the functions that makes
this hack unnecessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: move eth_device into slave ...

An ethernet device is per slave, not per cpsw.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

cpsw: Add devicetree probe support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: inline slave_data ...

Devicetree probed cpsw devices won't have platform_data, so inline
the fields from slave_data instead of keeping a pointer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use new device_platform_driver() macro for drivers ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: net: add driver for TI CPSW ...

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>