net: phy: Add missing phy_unregister_device ...

The counterpart of phy_register_device is missing. Add it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: introduce phy_aneg_done ...

phy_wait_aneg_done() is directly called by the network code, so it
should not read phy registers directly. Introduce phy_aneg_done to
give phy drivers the chance to do something different to poll for
autonegotiation completion.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Add minimal support for QSGMII PHY ...

Based on Linux's support by Thomas Petazzoni:

    commit b9d1208
    Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
    Date:   Tue Apr 15 15:50:19 2014 +0200
    net: phy: add minimal support for QSGMII PHY

    This commit adds the necessary definitions for the PHY layer to
    recognize "qsgmii" as a valid PHY interface. A QSMII interface, as
    defined at
    http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface,
    is "is a method of combining four SGMII lines into a 5Gbit/s
    interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX
    data and a single LVDS clock signal. QSGMII uses significantly fewer
    signal lines than four SGMII busses."

    This type of MAC <-> PHY connection might require special handling on
    the MAC driver side, so it should be possible to express this type of
    MAC <-> PHY connection, for example in the Device Tree.

    Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
    Cc: devicetree@vger.kernel.org
    Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: remove now unused of_phy_device_connect ...

Since barebox handles phys from devicetree transparently we no longer
need of_phy_device_connect.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Support limiting phy speed in the devicetree ...

Even when both the ethernet controller and the phy support certain
features a board may have additional limitations. Allow specifying
it in the devicetree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: add of_phy_device_connect ...

This implements a of_phy_device_connect to allow DT enabled drivers
to connect to a PHY device by using the PHY's DT node only. It
currently assumes that each PHY node is a child of the corresponding
mdio bus.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Add static inline wrapper for phy_register_fixup_for_uid ...

Boards register a fixup for a phy without checking if phy support
is enabled. To fix compilation without phy support add a static
inline wrapper for phy_register_fixup_for_uid.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

miitool: change behaviour closer to linux' mii-tool ...

miitool without arguments will try to show status for all phys.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: implement detect callback for miibus devices ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Track mii buses on a list ...

To be able to iterate over registered mii buses

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: track registered state of a phy device ...

With this phy_device_connect only registers a phy device if it wasn't
registered already. This allows us to register phy devices outside
of ethernet drivers. phy_device_connect will now pick up an already
registered phy given that it's not attached to another ethernet device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: bail out early in phy_device_connect ...

If an ethernet device already has a phy in phy_device_connect all we
have to do is to start autonegotiation. Do this early and bail out
so that for the rest of the code it's clear that we have to search for
a phy device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/phy: support of mmd register read and write ...

Add function for indirect access of the mmd registers, based on linux.
phy_read_mmd_indirect
phy_write_mmd_indirect

Also clean some private mmd functions

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide include/: Add missing includes ...

This adds several missing includes to files under include/ which
we relied on being included implicitly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phy: fix force mode ...

do not try to read the status in force mode
the link is up

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net phylib: force to wait for link ...

When starting a network device wait until the link is up. Otherwise
autobooting does not work with little timeout and several attempts
have to be made until the network is finally up.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phylib: add fixup support ...

if board need specific phy fixup they can register it and then the code will
executed only if needed

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phylib: introduction of forced 100Mbps ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phy: add phy_drivers_register ...

to allow to register an array of drivers

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/eth: fix link handling ...

Check link status on eth device open time and then periodically
every 5 seconds.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: introduce phylib ...

Adapt phylib from linux

switch all the driver to it
reimplement mii bus

This will allow to have
 - phy drivers
 - to only connect the phy at then opening of the device
 - if the phy is not ready or not up fail on open

Same behaviour as in linux and will allow to share code and simplify porting.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>