No need for the boards to manually add memory, we can do this
automatically by reading back the memory size from the SDRAM
controller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

- Enable multi-image support to generate bootstream, sd-card and 2nd stage
  images.
- Handle pin-mux in lowlevel.c only.
- Use fine-tuned memory setup from u-boot.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The FSF address has changed; The FSF site says that
address is

  Free Software Foundation
  51 Franklin Street, Fifth Floor
  Boston, MA 02110-1301
  USA

(see http://www.fsf.org/about/contact/)

Instead of updating it each time the address changes,
just drop it completely treewide.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fixes:

arch/arm/boards/crystalfontz-cfa10036/cfa10036.c: In function 'cfa10036_devices_init':
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c:119:9: warning: unused variable 'ret' [-Wunused-variable]
arch/arm/boards/chumby_falconwing/falconwing.c: In function 'falconwing_devices_init':
arch/arm/boards/chumby_falconwing/falconwing.c:287:9: warning: unused variable 'rc' [-Wunused-variable]
arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c: In function 'imx23_olinuxino_devices_init':
arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c:118:9: warning: unused variable 'rc' [-Wunused-variable]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The purpose of envfs_register_partition is to print an error
message when the partition does not exist. Print an error message
from generic code instead and drop this function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

As the place for the atags now is determined automatically the call
from the boards can be removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	arch/mips/boards/qemu-malta/init.c
	commands/bootm.c
	drivers/of/base.c

mach/gpio.h is for the gpio API, so move unrelated stuff
away.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.

Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Some boards have board specific special clock setups. These are now
done in the SoC specific clock drivers.

It is assumed that most board specific clock setup is done based on
copy/paste from U-Boot. The generalized clock setup differs from
some boards:

- ioclk are adjusted to 480MHz
- ssp clocks are adjusted to 96MHz
- enet out clock is enabled

Some boards adjusted the ioclk to 320MHz and the ssp clock to 160MHz.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use MMC_CAP_ names instead of MMC_MODE_. This makes it more
clear that these are capabilities of host/card and do not refer
to the current mode. These are in line with the Linux Kernel
except for MMC_CAP_MMC_HIGHSPEED_52MHZ which could be fixed
later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx23-olinuxino is a board designed by Olimex.

It has the following features:

- Freescale iMX233 ARM926J processor at 454MHz
-64 MB RAM
-SD-card connector
-TV PAL/NTSC video output
-2 USB High Speed Hosts
-Ethernet 100 Mbit
-Stereo Audio Input
-Stereo Headphones Audio Output

More information at:
http://www.olimex.com/dev/imx233-olinuxino-maxi.html

Signed-off-by: Fadil Berisha <f.koliqi@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>