ARM: dts: phycore-imx6: change mtd-partition names for compatibility with kernel ...

The NVMEM-subsystem in newer kernels does not allow identical partition
names on different subdevices. According to the recommendation, we have to
rename the partition names to be compatible with actual kernel
versions.

To minimize the problems which could possibly arise, the nand device is
not changed. For all other devices, we prepend the device name to the
partitions.

Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: imx6: phytec: Increase NAND barebox partition size ...

For NAND flash with eraseblock size 1 MB and more the current
barebox partition size is not sufficient. The 4 FCB copies alone occupy
the 4 MB partition size. Increase the partition size to 16 MB to be fit
for the future and leaving some blocks for bad block handling as well.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: imx6: phycore: Update License, copyright and model description ...

Make use of SPDX license identifiers and update copyright notices and model
descriptions of the phyCORE-i.MX 6 SOM's.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: imx6: phycore: Make use of upstream devicetree ...

Make use of the upstream devicetree for the phyCORE-i.MX 6 and the
phyBOARD-Mira to reduce code duplication. In this context also add a
Mira devicetree for barebox to better differentiate between phyCORE
related settings and baseboard related settings.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: imx6qdl: phycore: Set phy-reset-duration for fec ...

The voltage of the ethernet phy needs to be stable before de-asserting
the reset pin. Thus set the phy-reset-duration to 10 ms.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: imx6*phytec*: switch to new partitioning scheme ...

Both Linux and barebox support this new scheme and it's the actually
the recommended one.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: use stdout-path property ...

linx,stdout-path has been deprecated. Use stdout-path instead.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mfd-dialog'

ARM: dts: phycore-imx6: Use generic jedec spi nor compatible ...

Use the generic jedec-spi-nor compatible for the SPI NOR node to make it
generic.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>

ARM: dts: imx6: phyboard-mira: Remove unecessary iomuxc subnode ...

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>

ARM: dts: imx6: phyboard-mira: Add usb support ...

This patch adds USB support for the phyBOARD-Mira for the host port and
the OTG port.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>

ARM: dts: phyCORE-imx6: Add SPINOR env node ...

Add the SPI NOR barebox-environment node to the devicetree to make it
possible to use the barebox-environment from SPI NOR when booting barebox
from SPI NOR.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>

ARM: dts: imx6qdl: phycore: Sync muxing with kernel ...

Sync the USDCH drive strength muxing with kernel.
With this drive strength we saw no sd card errors.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Acked-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>

ARM: i.MX: phytec-som-imx: Remove kernel and oftree partiton in NAND ...

We store kernel and oftree in static UBI volumes now. No need
for separate partitions any more.

Signed-off-by: Christian Hemp <christian.hemp@gmail.com>
Acked-by: Stefan Lengfeld <s.lengfeld@phytec.de>

ARM: i.MX: phycore-som: added and enabled DA9062 PMIC ...

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Tested-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>

ARM: dts: phycore-imx6: remove unnecessary include ...

The file 'imx6qdl.dtsi' is already included by DualLite/Solo and
Dual/Quad specific files 'imx6dl.dtsi' and 'imx6q.dtsi'. So the include
is not needed here.

Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: phycore-imx6: fix missing ?xc-skew-ps settings for ethphy ...

Add the missing txc-skew-ps and rxc-skew-ps settings for the Micrel PHY.
I have seen problems with 1GBit ethernet on a phyCORE-i.MX6 Solo. Oddly
enough the missing skew values are no problems for all our other
modules.

Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: phycore-imx6: refactor fec nodes ...

Refactor the common settings for device tree node 'fec' into the generic
phycore i.MX6 device tree file. This avoid redundant settings and makes
common fixes easier. Our kernel device tree files have the same layout.

Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx6qdl-phytec-phycore-som.dtsi: rename eeprom ...

Chose name according to kernel. This is needed for bootstate.

Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx6-phytec'

ARM: phytec-som-imx6: add NOR for phycore-imx6 emmc ...

Enable NOR for phyCORE-i.MX6 DualLite and Quad eMMC variants.

Furthermore add an extra 'status = "disabled"' in the flash node.  It
has no functional effect, because the SPI bus node 'ecspi1' is disabled,
too.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: increase barebox partition sizes ...

After doing a 'saveenv' command, it is no longer possible to boot.

The reason for this behaviour is that the 'barebox' partition has
currently
a size of 0x80000 (512 kB), which is not sufficient to store the barebox
binary. This causes the 'barebox' and 'barebox-environment' partitions
to overlap.

Fix this problem by increasing the size of the 'barebox' partition and
by placing the 'barebox-environment' right after it.

This patch increases the barebox partition for all i.MX boards to
0xe0000

Reported-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: Fix partition names ...

Partition names shouldn't be continuously numbered, instead the part
behind the '@' should match the reg property. Fix this for all ARM
device trees.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

ARM: imx6q: Add support for Phytec phyCORE-i.MX6 SOM ...

Add Phytec phyCORE-i.MX6 SOM.
    Support:
     - imx6q-phytec-phycore-som-nand:
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - NAND
        - SD
        - UART

     - imx6q-phytec-phycore-som-emmc
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - eMMC
        - SD
        - UART

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>