Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for the pll14xx found on i.MX8MM devices. This is
taken from the Kernel as of v5.5. Since we'll need some early setup
for the PLL a PBL hook is added to be called from lowlevel code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Based on Kernel commit 03d576f202 ("clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only"):

| Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk
| tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to
| enter the ldb_di_ipu_div divider. If the divider gets locked up, no
| ldb_di[x]_clk is generated, and the LVDS display will hang when the
| ipu_di_clk is sourced from ldb_di_clk.
|
| To fix the problem, both the new and current parent of the ldb_di_clk
| should be disabled before the switch. As this can not be guaranteed by
| the clock framework during runtime, make the ldb_di[x]_sel muxes read-only.
| A workaround to set the muxes once during boot could be added to the
| kernel or bootloader.
|
| Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
| Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| Signed-off-by: Shawn Guo <shawnguo@kernel.org>

[afa: reviewed for barebox]
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[afa: ported from Linux kernel commit 03d576f202]
[afa: added exception for i.MX6QP, see kernel commit f4a0a6c309]
[afa: added cpu_has_err009219 helper function]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

We'll need mux specific flags in the future, so add a parameter to
the mux initialization functions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The generic clk divider needs clock flags and divider flags. Fix
prototypes to take both as separate arguments.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This is based on Lucas' patch sent as "[PATCH v2 4/4] clk: imx: add
clock driver for i.MX8MQ CCM" to the mailing list.

It will likely need some rework before it is finally merged, so apply
the reworks here before merging into barebox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[andrew.smirnov@gmail.com: Fix pll type for IMX8MQ_VIDEO2_PLL1]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Port Linux kernel commit 22039d150f716e4e ("clk: imx7d: create clocks
behind rawnand clock gate") in order to correctly initialize clocks
necessary for APBH DMA block to be functional on i.MX7

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Remove imx_clk_pllv3_locked() which was introduced for the sake of
Vybrid platform. The same effect (waiting on 'locked' bit) can be
achived with vanilla clk_pllv3_enable/disable, which make said
function unnecessary.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The original clock code from Linux registers some gates at
base + 0x44e0, 0x44f0, 0x4500, 0x4510. These are not in the reference
manual and do not seem to have any effect on the hardware. The
reference manual lists clocks at 0x4700 and 0x4710 which Linux
does not control at all. These clocks really do have an effect on
the hardware and are needed for ethernet support. Register the
existing clocks rather than the made up clocks to support
ethernet.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

CLK_OPS_PARENT_ENABLE was missing on some i.MX7 specific clocks.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Taken from the kernel as of 4.10-rc3. Needed for i.MX7

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add IMX_PLLV3_SYS_VF610 subtype to pllv3 code to be able to control and
re-clock PLL1 and PLL2 on Vybrid SoC. This commit also introduces
imx_clk_pllv3_locked which allows the user to create PLLv3 and specify
how it should be polled for "locked" status (used in .set_rate callback)

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Port imx_clk_mux_flags from Linux, to simplify clock code porting.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Port imx_check_clocks() from Linux kernel.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add IMX_PLLV3_USB_VF610 PLLv3 types support clk-pllv3.c

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Update clk-gate2 code to be able to accept arbitrary 'cgr' value and
introduce imx_clk_gate2_cgr() (Used by Vybrid clock tree)

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Move clk code from 'mach-imx' to 'drivers' to keep the code tree
structure closer to that of analogous one from Linux kernel and,
arguably although subjective, to keep 'mach-imx' less cluttered.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>