MIPS: move r4k_cache_init in to cpu_probe function ...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: fix 'assignment makes integer from pointer without a cast' warning ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: remove request_sdram_region "fdt" ...

It is actually not needed at barebox runtime

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: relocation: do not use configurable memory layout ...

The relocator is not able to patch properly new location of
the stack. To make it work properly it is better to disable
HAVE_CONFIGURABLE_MEMORY_LAYOUT.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: relocation: add relocation support ...

this patch i a port of following patch from u-boot with some additional
integration changes and fixes of original code:
| Subject: [PATCH] MIPS: Stop building position independent code
|
| U-Boot has up until now built with -fpic for the MIPS architecture,
| producing position independent code which uses indirection through a
| global offset table, making relocation fairly straightforward as it
| simply involves patching up GOT entries.
|
| Using -fpic does however have some downsides. The biggest of these is
| that generated code is bloated in various ways. For example, function
| calls are indirected through the GOT & the t9 register:
|
|   8f998064   lw     t9,-32668(gp)
|   0320f809   jalr   t9
|
| Without -fpic the call is simply:
|
|   0f803f01   jal    be00fc04 <puts>
|
| This is more compact & faster (due to the lack of the load & the
| dependency the jump has on its result). It is also easier to read &
| debug because the disassembly shows what function is being called,
| rather than just an offset from gp which would then have to be looked up
| in the ELF to discover the target function.
|
| Another disadvantage of -fpic is that each function begins with a
| sequence to calculate the value of the gp register, for example:
|
|   3c1c0004   lui    gp,0x4
|   279c3384   addiu  gp,gp,13188
|   0399e021   addu   gp,gp,t9
|
| Without using -fpic this sequence no longer appears at the start of each
| function, reducing code size considerably.
|
| This patch switches U-Boot from building with -fpic to building with
| -fno-pic, in order to gain the benefits described above. The cost of
| this is an extra step during the build process to extract relocation
| data from the ELF & write it into a new .rel section in a compact
| format, plus the added complexity of dealing with multiple types of
| relocation rather than the single type that applied to the GOT. The
| benefit is smaller, cleaner, more debuggable code. The relocate_code()
| function is reimplemented in C to handle the new relocation scheme,
| which also makes it easier to read & debug.
|
| Taking maltael_defconfig as an example the size of u-boot.bin built
| using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils
| 2.24.90) shrinks from 254KiB to 224KiB.
|
| Signed-off-by: Paul Burton <paul.burton@imgtec.com>

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: relocation: pass ram size to pbl_main_entry ...

To make barebox dynamically relocatable it should know
the RAM size to be able to calculate proper new location.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: migrate all files to SPDX ...

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: port all mach* to multiimage ...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: put main_entry to __bare_init section ...

To make disassambly easier to read.
With this patch main_entry will be at the start of the text section
and not in the middle.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: mutliimage: pass devicetree from PBL to the main_entry ...

We need it for multiimage support.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: start: preserve DTB pointer for later use ...

We will get DTB pointer in a0 register. Since a0 is used as argument by
other functions, we need to preserve it and then pass as argument to the
main_entry().

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: use CKSEG1 instead of KSEG1 ...

KSEG1 constant is defined for 32 bit MIPS only. Use CKSEG1 which is defined for
both MIPS32 and MIPS64.

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: start.S: put entry code into the ".text_entry" section ...

The ".text_bare_init" section is not intended to be used
for storing entry code.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: start*.S: drop redundant .text ...

`.text' is equivalent to the `.section .text' directive.
The `.text' directive just before `.section ".text_bare_init"'
or just before `.section ".text_head_entry"' is redundant
so drop it.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: drop redundant start_barebox() declaration ...

The start_barebox() function is defined in the <common.h> header file.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of_unflatten_dtb(): Check return value with IS_ERR ...

Of_unflatten_dtb returns a ERR_PTR value so checking it against NULL is
incorrect. Fix it in all of the places where this was happening.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: dtb: register only one memory bank ...

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: refactor SBL start.S code ...

This commit removes code duplication by using
MIPS PBL macros in the SBL start.S file.

One of the side effects of this patch is that
the only <asm/pbl_macros.h> header file is depends
on the <generated/utsrelease.h> header file.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sizes.h: move include/sizes.h to include/linux/sizes.h ...

This file originates in Linux.  Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.

This commit was generated by the following commands:

  find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
  git mv include/sizes.h include/linux/

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Drop devicetree merge support ...

I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:

unflatten: too many end nodes

Remove this feature to save the complexity.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rework debug_ll ...

Convert to static inline functions and use lower case letters for function
names. Also, include mach/debug_ll.h when an architecture provides support
for debug_ll, not only when it's actually enabled. This allows architecures
to put some UART initialization code into mach/debug_ll.h which is compiled
out when debug_ll is disabled.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: pbl: remove extra copyrights ...

Remove Shinya Kuribayashi's copyright on the ADR macro
in start-pbl.S as we don't define this macro in
this file or even use it where.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: add initial device tree support ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: initialize malloc pool before start_barebox() ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pbl: factorise decompressor ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: add pre-bootloader (pbl) image support ...

This patch is based on ARM pbl support and allows
creating a pre-bootloader binary for compressed image.

For different MIPS SoCs (or even for different boards based
 on the same SoC) the operations carried on in start-pbl.S
can be very different. The additional constraints can be imposed
on the size of the boot code or the special magic labels in
the beginning of the boot code; In some cases it could be
necessary to show CPU is alive as early as possible
(transmit a char via UART or blink a LED).
So the demands for pbl start operation can be very different.

E.g. malta board store boot code at the NOR flash mapped
to the MIPS power-on address (0xbfc00000); it is the most
simple case: we need just copy pbl image from direct-mapped
flash to RAM and jump there.

The XBurst-powered boards store boot code in the beginning
of a NAND flash or in the beginning of SD/MMC card.
In this case we must use simple and short NAND or SD/MMC access
routines to copy pbl image to RAM.

To meet so different demands a simple technique is selected:

* MIPS pbl entry point located in file arch/mips/boot/start-pbl.S.

* MIPS pbl code (see start-pbl.S) assumes that every pbl-enabled
board has a arch/mips/boards/<BOARD>/include/board/board_pbl_start.h
header file. This file must contain definition of
the board_pbl_start macro. This macro is used as start of pbl image;

* the most popular asm routines (stack setup, relocation to link
address, NS16550 initialization (WIP) and so on) are containt
in the arch/mips/include/asm/pbl_macros.h header file.
So board pbl macro can use it if necessary.
It is possible to create similar headers with macros for each
specific SoC; so even if we have many different boards based
on the same SoC the board_pbl_start macro for every board
can be short and clear.

* after board-specific initialization the stack pointer
is initialized and pbl C code is started.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: main_entry.c: fix typo ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: add initial exceptions handling ...

Checking exception handling:

    $ make qemu-malta_defconfig
    $ make

    ...

    $ qemu-system-mips -nodefaults -M malta -m 256 \
       -nographic -serial stdio -bios ./barebox.bin

    ...

    barebox:/ md -l 0x03

    Ooops, address error on load or ifetch!
    EPC = 0xa082783c
    CP0_STATUS = 0x00000006
    CP0_CAUSE = 0x00000410
    CP0_CONFIG = 0x80008482

    ### ERROR ### Please RESET the board ###

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: import CPU and cache detection code from Linux 3.4 ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>