commands/*: Replace license and copyright boilerplate by SPDX identfiers ...

While at it also drop references to the non-existing CREDITS file and do
some small rearrangements for some uniform formatting.
(SPDX-License-Identifier first, then copyright texts and then an empty
line.)

The advantage is that these specifiers are machine-parseable which helps
license conformance.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: exit on invalid option ...

Barebox commands should not perform any action and return 0 if an
invalid parameter was given. This might cause undetected unintended
behvaior when calling commands with wrong options, either manually or
from a script.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

restart: replace reset_cpu with registered restart handlers ...

This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.

The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.

To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: reset: add shutdown_barebox() before reset_cpu() ...

Some of controlled by barebox peripheral devices may be
not affected by CPU reset, so we need call shutdown_barebox()
to stop them.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

complete: add empty complete support ...

for cpuinfo, clear, dhcp, false, login, lsmod, meminfo, passwd, pwd, reginfo,
reset, true, usb, version

for mach-imx and mach-mxs: dump_clocks
for u_serial: mycdev

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commands: remove struct command pointer from commands ...

This is unused in all commands and thus can be removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove typedef cmd_tbl_t and replace it with struct command ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rename U-Boot-v2 project to barebox ...

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: remove maxargs ...

No need to check for maximum argument counts. The commands are
safe to be called with more arguments, so lets safe some bytes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove u-boot command paramter flag

svn_rev_706 ...

add file headers

svn_rev_693 ...

remove do_reset

svn_rev_643 ...

structure cleanup