commands/*: Replace license and copyright boilerplate by SPDX identfiers ...

While at it also drop references to the non-existing CREDITS file and do
some small rearrangements for some uniform formatting.
(SPDX-License-Identifier first, then copyright texts and then an empty
line.)

The advantage is that these specifiers are machine-parseable which helps
license conformance.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: exit on invalid option ...

Barebox commands should not perform any action and return 0 if an
invalid parameter was given. This might cause undetected unintended
behvaior when calling commands with wrong options, either manually or
from a script.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: gadget: specify vendor/product id with device parameters ...

This introduces the device parameters:

usbgadget.product
usbgadget.vendor
usbgadget.manufacturer
usbgadget.productname

These variables are used to configure the USB vendor id, product id,
manufacturer name and product name.

Previously these were configured with arguments to the usbserial
and dfu command. The parameters are device static, so it's nice to
configure it somewhere in the environment instead of when calling
dfu/usbserial. Also when other gadget drivers are added we do not
have to duplicate the option parsing further.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: gadget: Update to 3.15 ...

This updates the USB Gadget stack to Linux-3.15.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	drivers/usb/core/Makefile

Documentation: remove doxygen documentation ...

The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands/usbserial: Remove unused variable ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove remaining references of CONFIG_BOARDINFO ...

With this all code uses barebox_get_model() and no longer
a compile time generated string.

Also this renames barebox_boardinfo() to barebox_get_model()
since we are going to add the corresponding _set_ function
and 'model' corresponds to the devicetree notion.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: remove struct command pointer from commands ...

This is unused in all commands and thus can be removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial gadget: enable/disable on request ...

- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x

Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>