Merge branch 'for-next/module'

Merge branch 'for-next/misc'

Merge branch 'for-next/kvx'

Merge branch 'for-next/imx'

Merge branch 'for-next/fastboot'

sandbox: add libc memory allocator ...

While we typically want to reuse as much barebox functionality as
possible in sandbox, using system malloc(3) instead can be very
useful when using external memory integrity tools. This is even
useful for AddressSanitizer, because the reports resulting from
the memory poisoning API are less detailed than the built-in
support for the libc malloc(3).

Note that a barebox "heap" is still allocated upfront. It's only
used for request_sdram_region now though. Whatever is allocated by
means of malloc and memalign will be ina disjunct heap.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: imx: add initial imx8mp support ...

This adds base support for the i.MX8MP SoC. Not much to do here as this
SoC is quite similar to the i.MX8M. This adds:

- Kconfig symbols
- bootsource detection
- register base address defines
- iomux defines

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

common: Kconfig: remove MIPS dependency for ELF ...

There is no reason anymore to limit the use of elf on mips since there
is no elf specific support needed in architectures. Drop the MIPS
dependency.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

module: Implement HAVE_MOD_ARCH_SPECIFIC ...

Implement HAVE_MOD_ARCH_SPECIFIC Kconfig and module_frob_arch_sections()
function prototype from Linux module subsystem.
module_frob_arch_sections() should be implemented by any architecture
that selects HAVE_MOD_ARCH_SPECIFIC, and is called from load_module()

Signed-off-by: David Dgien <dgienda125@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fastboot: Drop support for downloading to buffer ...

The option to download to a buffer instead of a file was introduced
because in some workloads it is required to have a contiguous image
in memory. With recent changes now ramfs can provide such a buffer
via memmap API even when it downloaded the data to a file. This makes
the explicit download to buffer option unnecessary, so remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: bootm: add support for elf file loading ...

This will allows elf loader to directly have an elf file available. Thus
filetype_elf bootm handlers will be able to use standard bootm functions
and data.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/kbuild'

fastboot: split generic code from USB gadget ...

The fastboot specification describes other protocols beyond USB. Allow
these to reuse the generic parts of the existing fastboot code when they
are implemented.

Most of the changes in common/fastboot.c are due to the renaming of struct
f_fastboot *f_fb to struct fastboot *fb.

Signed-off-by: Edmund Henniges <eh@emlix.com>
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kconfig: add 'option modules' to allow tristate options to become m ...

Since commit 18895514dc5e ("kconfig: update to v3.18-rc6"), tristate
symbols cannot become 'm'.

In old days of Linux, CONFIG_MODULES was the special option hard-coded
in Kconfig.

The current Kconfig does not know which option is it. You need to
specify 'option modules' to teach Kconfig that it is the module
support switch.

Add 'option modules' to revive the module builds.

Fixes: 18895514dc5e ("kconfig: update to v3.18-rc6")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/kconfig'

Merge branch 'for-next/kbuild'

drivers: add COMPILE_TEST prompts for some off-by-default options ...

Some Kconfig options we have are promptless and off-by-default and
instead can only be enabled by being selected from platform options.

For some of those that aren't compile testable, add a new
COMPILE_TEST-only prompt.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: introduce COMPILE_TEST option for build-testing ...

Compile-time analysis may help us catch latent bugs in barebox. For this
to be most effective, we need an easy way to compile as much of barebox
as possible. Giving all driver options prompts would do this, but at the
cost of making user experience worse, by asking them about drivers for HW
that's clearly not relevant to the platform they selected.

Do as Linux does and provide a default-off COMPILE_TEST option, which we
can use to make extra drivers selectable.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: Kconfig: remove some unused symbols ...

All these symbols are defined, but unused anywhere in the barebox tree.
Remove them.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: make DEFCONFIG_LIST work ...

Most of the Kconfig commands (except defconfig and all*config) read
the .config file as a base set of CONFIG options.

When it does not exist, the files in DEFCONFIG_LIST are searched in
this order and loaded if found.

This is not working for barebox because ARCH_DEFCONFIG is not set by
anyone, nor arch/$(ARCH)/defconfig exists.

Fix this.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: fix typos found with codespell ...

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/optee'

Merge branch 'for-next/misc'

imd: add support for checksum generation/verification ...

Add a new imd type "checksum". This type consists of the CRC32 checksum
of the whole barebox image minus the checksum itself.
The checksum can be written to the imd field with the bareboximd host-tool.
It can be verified with said tool or with "imd" on the target.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: add optee early loading function ...

Add a OP-TEE early loading function which expects a pointer to a valid
tee binary and the device tree. OP-TEE will then be started and barebox
will continue to run in normal mode.

The function start_optee_early should be used in a boards lowlevel.c
file. Ensure that barebox has been relocated and a proper c environment
has been setup beforehand. Depending on the OP-TEE configuration, the
fdt will be modified. If the internal barebox device tree is passed,
OP-TEE will overwrite barebox PBL memory during this modification. Copy
the fdt to a save memory location beforehand to avoid a corruption of
barebox PBL memory.

This also moves the OP-TEE Kconfig symbols into a separate menu.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: make CONFIG_BAREBOX_UPDATE visible ...

The barebox update infrastructure is also useful without
CONFIG_CMD_BAREBOX_UPDATE (e.g. from a own barebox_main() with
CONFIG_SHELL_NONE).

Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Allow usage of default environment without environment file storage ...

Currently, the default environment is only used when the
barebox environment on the persistent store is not valid
or when ENVFS_FLAGS_FORCE_BUILT_IN is set in the super block.

However, ENVFS_FLAGS_FORCE_BUILT_IN can be cleared and the
environmnet variables in the persistent store will be
used again. This may not be desirable.

This patch allows building CONFIG_DEFAULT_ENVIRONMENT
independent of CONFIG_ENV_HANDLING. This can be useful
if you never want to load or write values from the
persistent store and you only need to read environment variables
from your default environment.

If CONFIG_ENV_HANDLING is not set, a message will be printed to the
user indicating that changes to non-volatile variables won't be
persisted.

Move envfs functions that are needed when CONFIG_DEFAULT_ENVIRONMENT
and/or CONFIG_ENV_HANDLING is set to a new file common/envfs-core.c.

Signed-off-by: Albert Schwarzkopf <a.schwarzkopf@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: PBL break is not available on ARMv4 ...

ARMv4 does not support the bkpt mnemonic. Rather than trying to work
around this, just disable this feature for ARMv4. On Tegra the PBL
runs on the ARM720T co-processor, so we also need to disable the option
for this SoC architecture.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: improve kconfig help text ...

Cc: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/machine-id'