sata-imx: Fix a typo ...

It looks like comma operator was accidentaly used instead of regular
semicolon. Fix this to avoid confusing future readers of the code.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: sata-imx: Add delay to prevent link timeout ...

On the Utilite board this delay is necessary to prevent a link timeout.
It seems the values written to GPR13 have to settle for some time before
further accesses may be made.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: use 'const void *' for struct of_device_id.data ...

Since 2011 barebox' of_device_id struct uses unsigned long type for data field:

    struct of_device_id {
            char *compatible;
            unsigned long data;
    };

Almost always struct of_device_id.data field are used as pointer
and need 'unsigned long' casting.

E.g. see 'git grep -A 4 of_device_id drivers/' output:

    drivers/ata/sata-imx.c:static __maybe_unused struct of_device_id imx_sata_dt_ids[] = {
    drivers/ata/sata-imx.c- {
    drivers/ata/sata-imx.c-         .compatible = "fsl,imx6q-ahci",
    drivers/ata/sata-imx.c-         .data = (unsigned long)&data_imx6,
    drivers/ata/sata-imx.c- }, {

Here is of_device_id struct in linux kernel v4.0:

    struct of_device_id {
            char name[32];
            char type[32];
            char compatible[128];
            const void *data;
    };

Changing of_device_id.data type to 'const void *data' will increase
barebox' linux kernel compatibility and decrease number of 'unsigned
long' casts.

Part of the patch was done using the 'coccinelle' tool with the
following semantic patch:

    @rule1@
    identifier dev;
    identifier type;
    identifier func;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type)
    + dev_get_drvdata(dev, (const void **)&type)
    ...>
    }
    @rule2@
    identifier dev;
    identifier type;
    identifier func;
    identifier data;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type->data)
    + dev_get_drvdata(dev, (const void **)&type->data)
    ...>
    }

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sata-imx: i.MX53, use the internal 120MHz clock by default ...

this allows SATA to work on i.MX53 QSB-R :
barebox@Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
imx-sata 10000000.sata: port 0: SATA link ok
imx-sata 10000000.sata: port 0: Spinning up device...
imx-sata 10000000.sata: port 0: ok.
ata0: registered /dev/ata0

before this fix the log was :
barebox@Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
imx-sata 10000000.sata: port 0: SATA link timeout
set parameter: Connection timed out

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: Add missing includes ...

A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: i.MX sata: Add devicetree probe support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: Attach info callback to device, not to driver ...

Since the info is device specific and not driver specific, attach
the callback to the device. This makes it possible to have a info
callback for a device which does not have a driver attached.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use new device_platform_driver() macro for drivers ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: Add i.MX AHCI driver ...

This adds the glue code for the i.MX SATA controller. This controller
needs some i.MX specific setup and some SoC specific setting outside
the controller itself. The code for setting up the correct clock source
for the SATA phy has been taken from U-Boot.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>