Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/dts'

treewide: Convert files covered by ARM copyright to SPDX ...

According to Marc Zyngier, former employee at ARM, the company owns the
copyright for code created by its employees. Convert accordingly to SPDX
with the usual rearrangements. Also dropped Marc's email address which
doesn't work any more.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx: Add imx8mp clk driver ...

This adds clock support for the i.MX8MP, taken from Linux-5.7.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

clk: at91: remove now-duplicate crutch #defines ...

As the code comment describes, these #defines were only needed
temporarily till dts/ is synced vs Linux v5.8-rc1. This is now the case,
so drop them again.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: remove no-longer needed dt-compat code ...

dt-compat.c implemented bindings for following compatibles:

	atmel,at91rm9200-clk-main-osc
	atmel,at91sam9x5-clk-main-rc-osc
	atmel,at91rm9200-clk-main
	atmel,at91sam9x5-clk-main
	atmel,at91rm9200-clk-master
	atmel,at91sam9x5-clk-master
	atmel,at91rm9200-clk-peripheral
	atmel,at91sam9x5-clk-peripheral
	atmel,at91rm9200-clk-pll
	atmel,sama5d3-clk-pll
	atmel,at91sam9x5-clk-plldiv
	atmel,at91rm9200-clk-programmable
	atmel,at91sam9g45-clk-programmable
	atmel,at91sam9x5-clk-programmable
	atmel,at91sam9x5-clk-smd
	atmel,at91rm9200-clk-system
	atmel,at91sam9x5-clk-usb
	atmel,at91sam9n12-clk-usb
	atmel,at91rm9200-clk-usb
	atmel,at91sam9x5-clk-utmi

With the recent v5.8-rc1 sync, we no longer have any device trees in
the barebox repository that use these. Unlike Linux, we don't need to
support probing from old device trees, so drop the now unused code.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: sync with Linux v5.8-rc1 ...

This ports over a couple of changes that accrued upstream between v5.6,
when we last synchronized, and v5.8-rc1:

  5bf7f4a24938 clk: at91: sam9x60: Don't use audio PLL
  b0ecf1c6c6e8 clk: at91: usb: continue if clk_hw_round_rate() return zero
  43b203d32b77 clk: at91: sam9x60: fix usb clock parents
  d7a83d67a169 clk: at91: usb: use proper usbs_mask
  9962fb0d1995 clk: at91: usb: introduce num_parents in driver's structure
  12dc8d3be9d8 clk: at91: add at91sam9g45 pmc driver
  0969b242f7b8 clk: at91: add sama5d3 pmc driver
  143e04dab6b4 clk: at91: add at91sam9n12 pmc driver
  02ff48e4d7f7 clk: at91: add at91rm9200 pmc driver
  99e107439eea clk: at91: Add peripheral clock for PTC
  f6363c437dc6 clk: at91: pmc: do not continue if compatible not located
  7425f246f725 clk: at91: optimize pmc data allocation
  99767cd4406f clk: at91: allow setting PCKx parent via DT
  03a1ee1dad0e clk: at91: allow setting all PMC clock parents via DT

Besides fixes, mostly around sam9x60, this adds support for the new
a91 device tree clock bindings that were extended to the sama5d3 in v5.8-rc1.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: sync of_clk_get_parent_name with upstream ...

Upstream of_clk_get_parent_name only resorts to node name as a fallback.
Instead, it uses the name supplied for registered clocks whenever
possible. On the sama5d2, this results in sckc@f8048050 and slowck,
respectively. So far, sckc@f8048050 in the parents array couldn't be
matched with any existing clock, leading to an inaccurate clock tree.

Port over the v5.8-rc1 state of the function to fix this.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: mxs: Use device tree provided clock lookups ...

When probing from the device tree use the device tree provided clock
lookups. So far we only used the clock lookups based on the physical
base address of the device, but these should go sooner or later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk imx28: Add USB clocks ...

The USB clocks are missing, add them to make USB work as part of the
i.MX chipidea driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: mxs: Fix clock numbering ...

The device tree clock lookups use the position in the clks array,
hence they must match. fec_sleep is a barebox specific clock and
is in between other clocks. Put the clock at the end of the array.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: mxs: Do not enable enet_out clock ...

The enet_out clock gate is wrongly abstracted. The bit it is controlling
is not just a bit to enable the clock, it also controls the direction of
the ethernet reference clock. When the bit is cleared, the ethernet
reference clock must be fed into the SoC from an external oscillator;
when it's set then the ethernet reference clock is generated internally.
The correct setting depends on the board, so we must not set the bit
unconditionally during probe of the clock driver. Whether or not the
clock is enabled can be selected by the board by removing the clock from
the FEC in its dts.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: sckc: fix off-by-1000 in udelay() ...

SECOND is the number of nanoseconds in a second, but we need
the number of microseconds for use in udelay. Use USEC_PER_SEC.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: port Linux v5.6 SAM9X60 (new ARM926EJ-S) clock support ...

During a bug hunt that ultimately turned out unrelated to the state
of the barebox at91 clk driver, I synchronized its state with Linux v5.6.

Bug fixes and clean up to minimize the diff were split out in separate
prior commits.  This last commit imports the rest, which is basically
support for Microchip's new ARM926EJ-S SoC, the SAM9x60.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: add sama5d2 audio PLL support ...

Commit 7310b976 ("clk: at91: fix compilation errors in sama5d2.c") and
follow-up commit ca3077068c ("clk: at91: delete dead i2s/audio code")
had deleted the i2s/audio clock related parts of the upstream driver.

This was mostly due to unwillingness on my part to understand the code
enough for porting them and because I deemed them unnecessary to support
in barebox. The former has changed and the latter is not totally true as
audio PLL derived clocks may be muxed as inputs for programmable and
generated clocks.

Port them over and mimize the diff to upstream.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: allow 24 Mhz clock as input for PLL ...

The PLL input range needs to be able to allow 24 Mhz crystal as input
Update the range accordingly in plla characteristics struct

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568183622-7858-1-git-send-email-eugen.hristev@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: c561e41ce4d2 ("clk: at91: add sama5d2 PMC driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[afa: ported to barebox from Linux commit 81a6b601f9f49]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: Mark struct clk_range as const ...

It's just some static data that doesn't get changed after being used.
Mark it const everywhere.

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[afa: ported to barebox from Linux commit 7b4c162e03d47e0]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: add __init marker where appropriate ...

While redundant in barebox, it makes our diff to the upstream driver
smaller when synchronizing, so add it back.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: compile dt-compat for all platforms that require it ...

We have so far compiled in dt-compat only for CONFIG_SOC_SAMA5D3,
but we require it for device tree support of CONFIG_SOC_AT91SAM9
as well. Fix this.

While at it move around the obj- rules a bit to minimize the diff to
upstream.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: delete no-longer required DT compat code ...

Unlike Linux, we don't require barebox drivers to support old device
tree bindings. Following device tree compatibles are no longer present
in barebox latest import of dts/:

 * atmel,sama5d2-clk-generated
 * atmel,sama5d4-clk-h32mx
 * atmel,at91sam9g45-clk-pll
 * atmel,at91sam9g20-clk-pllb
 * atmel,at91sam9260-clk-slow

Drop their compat code.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: fix possible deadlock ...

Lockdep warns about a possible circular locking dependency because using
syscon_node_to_regmap() will make the created regmap get and enable the
first clock it can parse from the device tree. This clock is not needed to
access the registers and should not be enabled at that time.

Use the recently introduced device_node_to_regmap to solve that as it looks
up the regmap in the same list but doesn't care about the clocks.

Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[afa: ported to barebox from from Linux commit 6956eb33abb5dea]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: at91: fix masterck name ...

The master clock is actually named masterck earlier in the driver. Having
"mck" in the parent list means that it can never be selected.

Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver")
Fixes: a2038077de9a ("clk: at91: add sama5d2 PMC driver")
Fixes: 084b696bb509 ("clk: at91: add sama5d4 pmc driver")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[afa: ported to barebox from Linux commit 65a91e2e597dea]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: migrate to SPDX-License-Identifier use ...

Some of these are a product of source sync with Linux, the other were
done with macro assistance by searching for /later/, deleting license text,
adding appropriate SPDX-License-Identifier and manual post-review.

Devices without a license indicated where assumed GPL-2.0-only according
with the project's license.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: implement clk_register_fixed_rate ...

We lack a way to instantiate a fixed clock while specifying a parent.
This is used in the at91 clock code sync with upstream in a later
commit, so prepare by porting clk_register_fixed_rate.

It's based on the Linux commit of the same name with the difference that
it doesn't use (and thus doesn't require) a struct device_d * as first
parameter.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx'

clk: print more consistent clock states ...

In clk_dump we only print the state of clk_is_enabled(). Depending on
the clock this can mean different things. When the clock provides an
is_enabled() callback it will print its result, so the enabled state
matches the hardware state of that clock, but doesn't necessarily mean
its parents are enabled. If a clock does not provide an is_enabled()
callback then we rely on our internal enable_count tracker.

Change this to always print the hardware state of the current clock. It
can be:

- disabled: The clock is disabled (as provided by is_enabled())
- enabled: The clock is enabled (as provided by is_enabled())
- always enabled: The clock can't be disabled (no is_enabled callback
                  and can't be enabled/disabled)
- unknown: no is_enabled callback but can be enabled/disabled

Additionally we print the enable_count variable, so from enable_count !=
0 we can know that barebox has enabled the clock.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: Do not let the enable count of critical clocks go below 1 ...

The enable count of critical clocks may not drop below 1. Otherwise
the new parent during a reparenting of a critical clock will not
be enabled.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: initially enable critical clocks ...

Critical clocks have to be enabled initially. We have to do this not
only to enable the clock itself, but also to make sure its parents
stay enabled and also to correctly enable the new parents during
reparenting of the clock.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx: Add imx8mm clk driver ...

This adds clock support for the i.MX8MM, taken from Linux-5.5.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>