clk: mxs: Use device tree provided clock lookups ...

When probing from the device tree use the device tree provided clock
lookups. So far we only used the clock lookups based on the physical
base address of the device, but these should go sooner or later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk imx28: Add USB clocks ...

The USB clocks are missing, add them to make USB work as part of the
i.MX chipidea driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: mxs: Fix clock numbering ...

The device tree clock lookups use the position in the clks array,
hence they must match. fec_sleep is a barebox specific clock and
is in between other clocks. Put the clock at the end of the array.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: mxs: Do not enable enet_out clock ...

The enet_out clock gate is wrongly abstracted. The bit it is controlling
is not just a bit to enable the clock, it also controls the direction of
the ethernet reference clock. When the bit is cleared, the ethernet
reference clock must be fed into the SoC from an external oscillator;
when it's set then the ethernet reference clock is generated internally.
The correct setting depends on the board, so we must not set the bit
unconditionally during probe of the clock driver. Whether or not the
clock is enabled can be selected by the board by removing the clock from
the FEC in its dts.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: migrate to SPDX-License-Identifier use ...

Some of these are a product of source sync with Linux, the other were
done with macro assistance by searching for /later/, deleting license text,
adding appropriate SPDX-License-Identifier and manual post-review.

Devices without a license indicated where assumed GPL-2.0-only according
with the project's license.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/warnings'

treewide: Make locally used functions static ...

Many functions are only used locally but still are globally visible.
Make these function static. Avoids warnings generated with -Wmissing-prototypes

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: mux: Support mux specific flags ...

We'll need mux specific flags in the future, so add a parameter to
the mux initialization functions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX28: Add APBH clk support ...

i.MX28 fails to use DMA and NAND because it cannot find its clock.
Add the clock for APBH.

Fixes: 6eb2ba6f1b ("dma: apbh: Enable clock as a part of probing")

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove checks for xzalloc() returning NULL ...

xzalloc() either returns memory or panics, so checking for NULL is useless.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX28: Add PWM clk support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: remove unnecessary mach/imx-regs.h include ...

And replace the ones needed with the SoC specific header.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: gate: add flags argument to clock gate constructor ...

This adds a clk_gate_flags argument to clock gate creation functions
to allow the introduction of new clock gate modifiers.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: clk-fixed-factor: pass flags to initializers ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: clk-gate: pass flags to initializers ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: clk-mux: pass clk flags from initializers ...

struct clk has a flags field, let the clk-mux initializers set this
field.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX28: unbreak ethernet ...

since the switch to common clock, ethernet driver doesn't works and
and access to the network leads to :
eth0: Read MDIO failed...
unable to handle NULL pointer dereference at address 0x000000c7

The problem is that bit 31 (SLEEP) of register HW_CLKCTRL_ENET is kept
to its default value (1) which means : "put Ethernet block in sleep mode.
CLK_H_MAC0(1), CLK_H_MAC0(1)_S, and CLK_ENET0(1)_TX are gated off.
Ethernet can be wakeup remotely in sleep mode"
In that case the FEC don't get its clock.

This patch fix the problem by toggling this bit when FEC's clock is
enabled.

Tested on i.MX28EVK.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mxs: make ssp gates parents of ssp dividers ...

When changing the rates of the ssp clocks we have to poll the
busy bit, but only when they are enabled. The current code can
not check this properly since the gates are registered as children
of the dividers. This has the effect that when the gate is disabled
the busy bit will be set forever resulting in a freezed system.

Fix this by making the gates parents of the dividers which allows
clk_is_enabled to return the correct result.

The Kernel has the same problem, but here the busy polling is
limited to 10ms, so probably noone noticed this.

The datasheet mentions that the ssp dividers shall only be changed
when the clocks are enabled. The kernel and barebox currently ignore
this. I don't know what effect violating this rule has.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: MXS: Add is_enabled callback for clkref ...

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: add clk drivers ...

This adds support for the i.MX23 and i.MX28 clock modules. This mostly is
a copy from the kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: Add MXS specific clk types ...

MXS needs some special MXS specific clock types:

- pll
- ref (fractional divider)
- busy divider (divider with additional busy bit to poll on a rate change)
- lcdif (Combined clock out of a fractional divider, a divider and a gate.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>